DTEM1024 SERIES 16~36 Watts Medical AC/DC Desktop Power Supplies Rev B IEC-320-C14 Size: 3.94 x 1.77 x 1.22 inches IEC-320-C8 IEC-320-C6 IEC-320-C18 Size: 3.94 x 1.77 x 1.22 inches Size: 3.94 x 1.77 x 1.22 inches Size: 3.94 x 1.77 x 1.22 inches FEATURES • Single Outputs • IEC-320-C14, IEC-320-C8, IEC-320-C6, & IEC-320-C18 • RoHS & WEEE Compliance • 100~240VAC Input Voltage Range • MTBF > 30,000 Hours AC Inlets Available • Efficiency Meets CEC Level V, VI • UL/cUL 60601: 3rd Edition Medical Approvals • Optional Output Connectors Available • Short Circuit & Over Voltage Protection • TUV/SUD EN/IEC 606001 approvals for Class II • CB, CE, FCC approvals DESCRIPTION The DTEM1024 series of medical AC/DC desktop power supplies provides up to 36 Watts of continuous output power in a 3.94” x 1.77” x 1.22” package. All models have a single output and a wide input voltage range of 100~240VAC. This series is RoHS and WEEE compliant and meets CEC Level V, VI requirements. This series also has UL/cUL 60601 and TUV/SUD EN/IEC 60601 3rd edition (for class II) medical approvals. All models are protected against short circuit and over voltage conditions. Four AC inlet connector types are available for this series: IEC-320-C14, IEC-320-C8, IEC-320-C6, and IEC-320-C18. Optional output connectors are also available please call factory for ordering details. MODEL SELECTION TABLE Model Number (1) DTEM1024Ax DTEM1024Bx DTEM1024Cx DTEM1024Dx DTEM1024Ex DTEM1024Fx DTEM1024Gx DTEM1024Hx DTEM1024Jx DTEM1024Kx DTEM1024Mx DTEM1024Nx DTEM1024Px DTEM1024Qx DTEM1024Rx Input Voltage Range Output Voltage (2) 100 ~ 240 VAC 5 ~ 8 VDC 5 ~ 8 VDC 5 ~ 8 VDC 9 ~ 11 VDC 9 ~ 11 VDC 9 ~ 11 VDC 12 ~ 17 VDC 12 ~ 17 VDC 18 ~ 24 VDC 18 ~ 24 VDC 36 ~ 48 VDC 36 ~ 48 VDC 12V 12V 24V Output Current Min Max 0A 2.0A 0A 3.0A 0A 4.0A 0A 1.5A 0A 2.0A 0A 3.0A 0A 1.66A 0A 2.5A 0A 1.33A 0A 1.66A 0A 0.55A 0A 0.83A 0A 3.0A 0A 2.0A 0A 1.5A Load Regulation ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% Line Ripple & Noise (4) Output Power Regulation(3) ±1% 100mVp-p 16W ±1% 100mVp-p 20W ±1% 100mVp-p 24W ±1% 250mVp-p 18W ±1% 250mVp-p 24W ±1% 250mVp-p 27W ±1% 250mVp-p 20W ±1% 250mVp-p 30W ±1% 350mVp-p 24W ±1% 350mVp-p 30W ±1% 480mVp-p 20W ±1% 480mVp-p 30W ±1% 250mVp-p 36W ±1% 250mVp-p 24W ±1% 350mVp-p 36W NOTES 1. The “x” in the model number represents the type of AC inlet connector: “x” can be “1” for IEC-320-C14 type, “2” for IEC-320-C8 type, “3” for IEC320-C6, or “6” for IEC-320-C18 type. 2. The output voltage is specified as a range (Ex: 36~48 VDC); the customer must specify what they want the voltage set at. 3. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. 4. Ripple and Noise is measured at nominal line and full load with 20MHz bandwidth and a 0.1µF ceramic capacitor and 47µF aluminum capacitors in parallel across the output. 5. LED option available. 6. Optional output connectors are available. Please call factory for ordering details. 09/22/2014 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-7789797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 3 Rev B DTEM1024 SERIES 16~36 Watts Medical AC/DC Desktop Power Supplies TECHNICAL SPECIFICATIONS: DTEM1024 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Max Unit 100 240 VAC Input Frequency 50 60 Hz Input Current 0.5 1 A 60 A INPUT SPECIFICATIONS Input Voltage Inrush Current OUTPUT SPECIFICATIONS Output Voltage Line Regulation Min Cold start Typ See Table Defined by changing ±10% of input voltage from nominal line at rated load Load Regulation -1 +1 % -5 +5 % Output Power See Table Output Current See Table Minimum Load Ripple & Noise (20MHz BW) 0 Measured at nominal line and full load with 0.1µF ceramic and 47µF aluminum capacitors in parallel Hold-up Time A See Table 8.3 Turn-on Time PROTECTION Over Voltage Protection ms 3 s Automatic recovery Short Circuit Protection GENERAL SPECIFICATIONS Efficiency ENVIRONMENTAL SPECIFICATIONS Operating Temperature Automatic recovery Meet CEC Level V, VI 0 +40 °C Storage Temperature -20 +85 °C Operating Humidity 10 90 % Storage Humidity 5 95 % Cooling Free air convection MTBF PHYSICAL SPECIFICATIONS Weight 30,000 Dimensions (L x W x H) AC Inlet Connector Output Connectors Suffix “1” Suffix “2” Suffix “3” Suffix “6” Call factory for ordering details hours 7.05oz (200g) 3.94 x 1.77 x 1.22 inches (100 x 45 x 31 mm) IEC-320-C14 IEC-320-C8 IEC-320-C6 IEC-320-C18 Several options available SAFETY & COMPLIANCE Safety Approvals Compliance 09/22/2014 For class II only UL/cUL UL60601: 3rd edition TUV/SUD EN/IEC 60601-1: 3rd edition CB, CE, and FCC RoHS, WEEE, CEC Level V, VI Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-7789797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 3 Rev B DTEM1024 SERIES 16~36 Watts Medical AC/DC Desktop Power Supplies MECHANICAL DRAWING COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 09/22/2014 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-7789797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 3