DC AXIAL FAN 80x80x25mm FAD1-08025 Series Features: Motor: Brushless DC Motor Protection: Impedance Protected Bearing Type: Two Ball, 1B1S, Sleeve, or Hydro Dynamic Connection: UL 1007 AWG 24, 300mm Wire Leads Frame Material: Plastic UL94V-0 Impeller Material: Plastic UL94V-0 Operating Temp: Two Ball: -10°C~70°C 1B1S: -10°C~70°C Sleeve: -10°C~60°C Hydro Dynamic: -10°C~70°C Life Expectancy: Two Ball: 70,000 Hours 1B1S: 50,000 Hours Sleeve: 30,000 Hours Hydro Dynamic: 50,000 Hours Fan-S Division Model No. Volt. (VDC) Current Power Rated Speed (A) (W) (rpm) FAD1-08025C * AW11 12 0.05 0.60 FAD1-08025C * LW11 12 0.08 0.96 FAD1-08025C * MW11 12 0.12 FAD1-08025C * HW11 FAD1-08025C * JW11 12 0.21 12 FAD1-08025D * LW11 FAD1-08025D * MW11 24 FAD1-08025D * HW11 Maximum AirFlow (CMM) 1600 0.582 2100 0.764 1.44 2500 2.52 3000 0.23 2.76 0.04 0.96 24 0.07 24 0.10 (CFM) Maximum Static Pressure (InAq) 20.570 0.043 27.019 0.072 0.916 32.384 1.093 38.648 3400 1.225 2100 0.764 1.68 2500 2.40 3000 * Indicates “B” (Ball Bearing), “A” (1B1S), “S” (Sleeve), or “H” (Hydro Dynamic) (mmAq) Noise Level (dB/A) 1.092 86.0 1.828 22.3 86.0 0.102 2.590 29.4 86.0 0.142 3.606 35.2 86.0 43.291 0.167 4.241 37.4 86.0 27.019 0.072 1.828 22.3 86.0 0.916 32.384 0.102 2.590 29.4 86.0 1.093 38.648 0.142 3.606 35.2 86.0 Noise is measured at the distance of one (1) meter from the axis of intake. FLOWRATE(CMM) 0.283 0.566 0.849 1.132 1.415 0.197 M 風扇型號： L A H 0.157 3.0 0.118 2.0 0.079 1.0 0.039 0.0 STATIC PRESSURE(mmAq) STATIC PRESSURE(mmAq) J 4.0 0.000 0 10 20 30 40 50 FLOWRATE(CFM) ISO-9001 Company (g) 16.5 Fan Performance Curve 0.000 5.0 Weight Qualtek Electronics Corporation www.qualtekusa.com