Tol RDC IDC ( H) % MAX IN ( ) (A) CDRH5D28-2R6 2.6uH @ 10kHz N 0.018 2.6 CDRH5D28-3R0 3.0uH @ 10kHz N 0.024 2.4 CDRH5D28-4R2 4.2uH @ 10kHz N 0.031 2.2 CDRH5D28-5R3 5.3uH @ 10kHz N 0.038 1.9 CDRH5D28-6R2 6.2uH @ 10kHz N 0.045 1.8 CDRH5D28-8R2 8.2uH @ 10kHz N 0.053 1.6 CDRH5D28-100 10uH @ 10kHz N 0.065 1.3 CDRH5D28-120 12uH @ 10kHz N 0.076 1.2 CDRH5D28-150 15uH @ 10kHz N 0.103 1.1 CDRH5D28-180 18uH @ 10kHz N 0.11 1 CDRH5D28-220 22uH @ 10kHz N 0.122 0.9 CDRH5D28-270 27uH @ 10kHz N 0.175 0.85 CDRH5D28-330 33uH @ 10kHz N 0.189 0.75 CDRH5D28-390 39uH @ 10kHz N 0.212 0.7 CDRH5D28-470 47uH @ 10kHz N 0.26 0.62 CDRH5D28-560 56uH @ 10kHz N 0.305 0.58 CDRH5D28-680 68uH @ 10kHz N 0.355 0.52 CDRH5D28-820 82uH @ 10kHz N 0.463 0.46 CDRH5D28-101 100uH @ 10kHz N 0.52 0.42 SPECIFICATION TYPE = CONSTRUCTION = TERIMAL COATING = OPERATING TEMP. = STORAGE TEMP = INSULATION RESISTANCE = DIELECTRIC STREGTH = HUMIDITY EFFECTS = PACKAGING MARKING CDRH5D28 SURFACE MOUNT POWER INDUCTOR NICKEL / SILVER -40 TO +85 C -55 TO +125 C 100MOhm. 100V TERMINAL-CORE 250Vac TERMINAL-CORE L 5 @ 95%RH, 40 C, 1HR Q 5 @ 95%RH, 40 C, 1HR = 2000PCS/REEL = 3 CHARACTERS, VALUE NOTE TOLERANCES L=15%; M=20%; N=30% 5.70 5.70 2.15 2 2.15 6.3 L 3.0 Part NAME PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AIT COMPONENTS LTD. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF AIT COMPONENTS LTD IS STRICTLY PROHIBITED. MATERIAL FINISH DATE AIT COMPONENTS LTD www.aitcomponents.com DRAWN CHECKED ENG APPR. -- UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES: ONE PLACE DECIMAL +/-0.3 TWO PLACE DECIMAL +/-0.13 ANGLE +/-1 DEGREE -- DO NOT SCALE DRAWING TITLE: CDRH6D28 SMD POWER INDUCTOR SIZE A DWG. NO. SCALE:1:1 CDRH6D28 SMD POWER INDUCTOR SHEET 1 OF 1 REV. 00