Vishay CRCC1206105J100KTF Thick film, rectangular, resistor/capacitor chip Datasheet

CRCC
Vishay Dale
Thick Film, Rectangular, Resistor/Capacitor Chip
FEATURES
• Single component reduces board space and
component counts
•
•
•
•
•
•
Choice of Dielectric Characteristics X7R or Y5U
Wrap around termination
Thick film Resistor/Capacitor element
Inner electrode protection
Flow & Reflow solderable
Automatic placement capability, standard size
STANDARD ELECTRICAL SPECIFICATIONS
SIZE
RESISTOR
GLOBAL
POWER RATING TEMPERATURE TOL
MODEL INCH METRIC
COEFFICIENT
P70 °C
%
W
ppm/°C
CAPACITOR
VALUE
RANGE
Ω
TEMPERATURE TOL. VOLTAGE
RATING
DIELECTRIC COEFFICIENT
%
VDC
%
CRCC1206
1206
3216
0.125
200
5
10R - 1M0
CRCC1206
1206
3216
0.125
200
5
10R - 1M0
RESISTOR
• Operating Temperature Range: - 55 °C to + 125 °C
• Technology: thick film
VALUE
RANGE
pF
X7R
± 15
20
50
10 - 270
Y5U
+ 22, - 56
20
50
270 - 1800
CAPACITOR
• Operating Temperature Range: X7R - 55 °C to + 125 °C
Y5U - 30 °C to + 85 °C
• Maximum Dissipation Factor: 2.5 %
Notes
• Packaging: see appropriate catalog or web page
• Power rating depends on the maximum temperature at the solder point, the component placement density and the substrate material
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
RESISTOR
X7R CAPACITOR
Rated Dissipation at 70 °C
W
0.125
–
–
Capacitor Voltage Rating
V
–
50
50
Dielectric Withstanding Voltage
(5 seconds, 50mA Charge)
Vdc
–
125
125
Category Temperature Range
°C
- 55/+ 155
- 55/+ 125
- 30/+ 85
Insulation Resistance
Ω
Weight/1000 pieces
g
>
1010
>
0.65
Y5U CAPACITOR
1010
> 1010
2
5.5
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CRCC1206472J220MTF (preferred part numbering format)
C
GLOBAL MODEL
CRCC1206
R
C
C
1
RESISTANCE VALUE
2 digit significant figure,
followed by a multiplier
100 = 10 Ω
683 = 68 kΩ
105 = 1.0 MΩ
2
0
6
RES. TOLERANCE
F=±1%
G=±2%
J=±5%
4
7
2
J
2
CAPACITANCE VALUE (pF)
2 digit significant figure,
followed by a multiplier
100 = 10 pF
271 = 270 pF
182 = 1800 pF
2
0
M
T
F
CAP. TOLERANCE
K = ± 10 %
M = ± 20 %
PACKAGING
EA = Lead (Pb)-free,
T/R (4000 pcs)
TF = Tin/Lead,
T/R (4000 pcs)
Historical Part Number example: CRCC1206472J220MR02 (will continue to be accepted)
CRCC1206
472
J
220
M
R02
MODEL
RESISTANCE VALUE
RES. TOLERANCE
CAPACITANCE VALUE
CAP. TOLERANCE
PACKAGING
www.vishay.com
186
For technical questions, contact: [email protected]
Document Number: 31045
Revision: 12-Jan-07
CRCC
Thick Film, Rectangular, Resistor/Capacitor Chip
Vishay Dale
DIMENSIONS
SIZE
DIMENSIONS [in millimeters]
INCH METRIC
1206
3216
L
SIZE
Rated Power in %
W
H
T1
T2
3.2 ± 0.15 1.6 ± 0.15 0.55 ± 0.15 0.5 ± 0.25 0.5 ± 0.25
SOLDER PAD DIMENSIONS [in millimeters]
REFLOW SOLDERING WAVE SOLDERING
INCH
METRIC
a
b
l
a
b
l
1206
3216
0.9
1.7
2.0
1.1
1.7
2.2
SCHEMATIC
120
100
80
60
40
20
0
- 55
- 25
0
25
Derating
50
75
100
125
150 175
70 Ambient Temperature in °C
PERFORMANCE
TEST RESULTS
TEST
CONDITIONS OF TEST
Endurance Test at 70 °C
MIL-Std-202 Method 108
1000 hours at 70 °C, 1.5 hours "ON", 0.5 hours "OFF"
Dielectric Withstanding Voltage
MIL-Std-202 Method 301
125 Vdc, 5 seconds, 50 mA charge
Thermal Shock
MIL-Std-202 Method 107
100 cycles, - 55 to + 125 °C
± (5 % + 2 Ω)
± 20 %
Moisture
MIL-Std-202 Method 106
Omit steps 7A and B
± (5 % + 2 Ω)
± 20 %
Resistance to Soldering Heat
EIA 575
10 seconds at 260 °C solder bath temperature
± (5 % + 2 Ω)
± 20 %
High Temperature Exposure
EIA 575
125 °C for 100 hours
± (5 % + 2 Ω)
± 20 %
Low Temperature Operation
EIA 575
1 hour at - 55 °C then 45 minutes at 50 V
± (5 % + 2 Ω)
± 20 %
Solderability & Leaching
EIA 575 3.12
Condition C
R
C
± (5 % + 2 Ω)
± 20 %
no physical damage
95 % Coverage
APPLICABLE SPECIFICATIONS
• IPC Standards
• EIA 575
Document Number: 31045
Revision: 12-Jan-07
For technical questions, contact: [email protected]
www.vishay.com
187
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages