ACDC 625 Watts AEP Series xppower.com • Universal Input 90264 VAC • Continous Short Circuit Protection • EN550022 Class B • Low Cost • 6, 15 and 25 Watt Versions • Nonstandard Outputs Available • 3 Year Warranty Specification Input Input Voltage Input Frequency Input Current Inrush Current Power Factor General • 90-264 VAC • 47-63 Hz • 0.5/0.25 A max at 115/230 VAC (6 W & 15 W) 0.7/0.3 A at 115/230 VAC (25 W) • 15/30 A max at 115/230 VAC (6 W) 25/50 A max at 115/230 VAC (15 W & 25 W) • Meets EN61000-3-2, Class A Efficiency Isolation Switching Frequency Power Density MTBF • Typically 67% for 6 W, 75% for 15 W, 80% for 25 W • 3000 VAC Input to Output • 30-200 kHz (6 W) 30-35 kHz typical (15 W & 25 W) • 0.75 W/in3 (6W), 1.87 W/in3 (15 W) 1.88 W/in3 (25 W) • >200 kHrs to MIL-HDBK-217F at 25 °C, GB Output Output Voltage Initial Set Accuracy Minimum Load Start Up Delay • • • • Hold Up Time • Line Regulation Load Regulation Ripple & Noise Overvoltage Protection Overload Protection Short Circuit Protection • • • • • • Temp. Coefficient • See tables See tables No minimum load requirement 6 W 100 ms, 15 W 270 ms, 25 W 280 ms 10 ms typical at 115 VAC, 60 ms typical at 230 VAC See tables See tables 1 % pk-pk max (see note 2) 125% typical Trip and restart (Hiccup mode) Constant current (6 W) Continuous (auto recovery) (15 W & 25 W) ±0.05%/°C Environmental Operating Temperature • 0 °C to +60 °C, derate linearly from +40 °C at 100% load to 60% load at +60 °C (6 W & AEP15 5 V-13.6 V), 50% load at 60 °C (25 W & AEP15 15 V-24 V) Storage Temperature • -20 ˚ C to +85 ˚ C Operating Humidity • 93% RH, non-condensing Operating Altitude • 2000 m EMC & Safety Emissions Harmonic Currents Voltage Flicker • EN55022 Class B conducted and radiated • EN61000-3-2 Class A • EN61000-3-3 ESD Immunity Radiated Immunity EFT/Burst Surge • • • • Conducted Immunity Dips & Interruptions Safety Approvals EN61000-4-2, level 2 Perf Criteria B EN61000-4-3, level 2 Perf Criteria A EN61000-4-4, level 2 Perf Criteria B EN61000-4-5, Installation Class 2, Perf Criteria B • EN61000-4-6, level 2 Perf Criteria B • EN61000-4-11, 5 % UT 10 ms, Perf Criteria B, 70 % UT 500 ms, Perf Criteria C • EN60950, UL1950, CSA C22.2 No.234 cUL Output Voltage 4.2 5.0 6.0 6.5 7.0 7.5 8.0 9.0 10.0 12.0 Output Current V V V V V V V V V V 1000 1200 1000 650 650 650 650 650 600 500 Ripple & Noise(2) mA mA mA mA mA mA mA mA mA mA 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% Initial Set Accuracy(1) ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% Line Regulation(3) ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% Load Regulation(4) ±4% ±4% ±4% ±3% ±3% ±3% ±3% ±2% ±2% ±2% ACDC AEP06 Models and Ratings Model Number AEP06US042 AEP06US05 AEP06US06 AEP06US065 AEP06US07 AEP06US075 AEP06US08 AEP06US09 AEP06US10 AEP06US12 Notes 1. Initial set accuracy is at 60% full load. 2. Add a 0.1µF E.L capacitor to output for ripple & noise measurement at 20 MHz BW. 3. Line regulation measured from 100 VAC to 240 VAC, full load. 4. Load regulation measured from 60% to full load and from 60% to 20% load (60% ±40% load). Mechanical Details 6 & 15 Watt Models All dimensions are in inches (mm) 0.54 (13.7) 2.05 2.71 (52.0) (68.9) 2.83 (72.0) 0.37 (9.5) 2.05 3.53 (52.0) (89.7) 2.83 (72.0) 70.87 ±1.97 (1800.0 ±50.0) 0.50 (12.7) 70.87 ±1.97 (1800.0 ±50.0) 0.67 (17.0) 0.75 (19.0) 1.38 (35.0) 1.38 (35.0) To order US add suffix’ -US’ to model number 2.83 (72.0) 3.31 (84.0) 2.05 (52.0) 0.71 (18.0) To order European add suffix’ -EU’ to model number 2.05 (52.0) 2.83 (72.0) 3.40 (86.3) 70.87 ±1.97 (1800.0 ±50.0) 70.87 ±1.97 (1800.0 ±50.0) 0.67 (17.0) 1.38 (35.0) To order Australian add suffix’ -AU’ to model number Weight: AEP06: 0.3 lb (135 g) AEP15: 0.35 lb (160 g) Output Plug: 0.22 x 0.10 x 0.37 (5.5 x 2.5 x 9.5) 0.71 (18.0) 1.38 (35.0) To order UK add suffix’ -UK’ to model number 0.14 (3.5) 0. (1 Output Voltage 5.0 6.0 7.5 9.0 12.0 13.6 15.0 18.0 24.0 3.3 5.0 12.0 15.0 18.0 24.0 V V V V V V V V V V V V V V V Output Current 2.00 1.50 1.60 1.40 1.00 1.00 1.00 0.83 0.63 4.00 4.00 2.10 1.67 1.40 1.05 A A A A A A A A A A A A A A A Ripple & Noise(2) 1% 1% 1% 1% 1% 1% 1% 1% 1% 50 mV pk-pk 1% 1% 1% 1% 1% Initial Set Accuracy(1) ±2% ±2% ±2% ±2% ±2% ±2% ±2% ±2% ±2% ±2% ±2% ±2% ±2% ±2% ±2% Line Regulation(3) ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% Load Regulation(4) ±4% ±4% ±4% ±4% ±4% ±4% ±4% ±4% ±4% ±6% ±6% ±5% ±3% ±2% ±2% Model Number AEP15US05 AEP15US06 AEP15US075 AEP15US09 AEP15US12 AEP15US136 AEP15US15 AEP15US18 AEP15US24 AEP25US033 AEP25US05 AEP25US12 AEP25US15 AEP25US18 AEP25US24 Notes 1. Initial set accuracy is at 60% full load. 2. Add a 0.1µF E.L capacitor to output for ripple & noise measurement at 20 MHz BW. 3. Line regulation measured from 100 VAC to 240 VAC, full load. 4. Load regulation measured from 60% to full load and from 60% to 20% load (60% ±40% load). Mechanical Details 25 Watt Models All dimensions are in inches (mm) For 15 Watt model mechanical details see 6 Watt model 1.89 (48.0) 3.19 (81.0) 7 3 3.19 (81.0) 70.87 ±1.97 (1800.0 ±50.0) 70.87 ±1.97 (1800.0 ±50.0) 3 2.20 (56.0) 2.20 (56.0) To order US add suffix’ -US’ to model number 3.19 (81.0) To order European add suffix’ -EU’ to model number 1.89 (48.0) 3.19 (81.0) 1.89 (48.0) 3.19 (81.0) 1.89 (48.0) 3.19 (81.0) 70.87 ±1.97 (1800.0 ±50.0) 2.20 (56.0) 3.19 (81.0) 3 To order Australian add suffix’ -AU’ to model number 70.87 ±1.97 (1800.0 ±50.0) 2.20 (56.0) 3.19 (81.0) 3 To order UK add suffix’ -UK’ to model number Weight: 0.485 lb (220 g) Output Plug: 0.22 x 0.10 x 0.37 (5.5 x 2.5 x 9.5) 07-Sept-11 ACDC AEP1525 Models and Ratings