EDI7F331MV 1Mx32 FLASH MODULE DESCRIPTION FIG. 1 The EDI7F331MV and EDI7F2331MV are organized as one and two banks of 1Mx32 respectively. The modules are based on AMDs AM29LV008T - 1Mx8 Flash device in TSOP packages which are mounted on an FR4 substrate. BLOCK DIAGRAMS EDI7F331MV-BNC: 1Mx32 80 PIN SIMM Both modules offer access times between 80 and 150ns allowing for operation of high-speed microprocessors without wait states. E0\ A0-A19 G\ FEATURES 1Mx32 and 2x1Mx32 Densities 1Mx8 DQ0-DQ7 1Mx8 DQ8-DQ15 1Mx8 DQ16-DQ23 1Mx8 DQ24-DQ31 W0\ Based on AMD - AM29LV008T Flash Device Fast Read Access Time - 80ns W1\ 3.3- Volt-Only Reprogramming Flexible, Sector Architecture One 16Kbyte, two 8Kbyte, one 32Kbyte and fifteen 64Kbyte sectors. Any combination of sectors can be erased Also supports full chip erase W2\ W3\ Sector Protection Hardware method that disables any combination of sectors from write or erase operations EDI7F2331MV-BNC: 2x1Mx32 80 PIN SIMM Embedded Erase Algorithms E1\ E0\ A0-A19 G\ Automatically preprograms and erases the chip or any combination of sectors Embedded Program Algorithms 1Mx8 Automatically programs and verifies data at specified address 1Mx8 DQ0-DQ7 1Mx8 DQ8-DQ15 1Mx8 DQ16-DQ23 1Mx8 DQ24-DQ31 W0\ Data Polling and Toggle Bit feature for detection of program or erase cycle completion 1Mx8 W1\ Low Power Dissipation 1Mx8 30mA per Device Active Current W2\ 10µA per Device CMOS Standby Current Typical Endurance >100,000 Cycles 1Mx8 Single 3.3 Volt ±10% Supply W3\ CMOS and TTL Compatible Inputs and Outputs Commercial and Industrial Temperature Range Package 80 Pin SIMM (JEDEC) Sept. 2002 Rev. 2A ECO #15632 1 White Electronic Designs Corporation (508) 366-5151 www.whiteedc.com EDI7F331MV CAPACITANCE (f=1.0MHz, VIN = VCC or VSS) Parameter Address Lines Data lines Chip & Write Enable Lines Output Enable lines Sym CA CDQ CC 1Meg Max 35 15 15 2x1Meg Max 70 30 30 Unit pF pF pF CG 35 70 pF PIN CONFIGURATIONS Pin # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Pin Name VSS VCC NC G\ W0\ W1\ NC DQ16 DQ17 DQ18 DQ19 DQ20 DQ21 DQ22 DQ23 DQ24 DQ25 DQ26 DQ27 DQ28 Pin # 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Pin Name * * * * VSS DQ29 DQ30 DQ31 W2\ NC NC NC A19 A18 A17 A16 A15 A14 A13 A12 Pin # 41 42 43 44 45 461 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Pin Name A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 AO W3\ VSS DQ15 DQ14 DQ13 DQ12 DQ11 DQ10 Pin # 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 Simm Density Pin 1Meg 2x1Meg 21 NC NC 22 NC NC 23 NC E1\ 24 E0\ E0\ Pin Name DQ9 DQ8 DQ7 DQ6 DQ5 DQ4 DQ3 DQ2 DQ1 DQ0 NC VCC PD1 PD2 PD3 PD4 PD5 PD6 PD7 VSS Presence Detect Pin Out Pin 1Meg 2x1Meg PD1 NC VSS PD2 VSS VSS PD3 NC NC PD4 VSS VSS A0-A19 E0\,E1\ W0\-W3\ G\ DQ0-DQ31 PD VCC VSS NC *TBD White Electronic Designs Corporation (508) 366-5151 www.whiteedc.com 2 Address input Chip Enable Write Enable Output Enable Data Input/Output Presence Detect Power 3.3V±10% Ground No Connect Sept. 2002 Rev. 2A ECO #15632 EDI7F331MV Pin Configurations and Block Diagram ORDERING INFORMATION Part Number EDI7F331MV80BNC EDI7F331MV90BNC EDI7F331MV100BNC EDI7F331MV120BNC EDI7F331MV150BNC Speed (ns) 80 90 100 120 150 Package 346 346 346 346 346 Note: To order an Industrial grade product substitute the letter C in the Suffix with the letter I. PACKAGE NO. 346: 80 PIN SIMM (JEDEC) 4.655 MAX. 4.384 0.850 MAX. 0.250 0.120 MAX. R1 R3 J1 J3 0.400 153 0.050 TYP. 0.062 R 4.150 0.250 0.062 R 0.125 MIN. 2.192 2.245 ORDERING INFORMATION Part Number EDI7F2331MV80BNC EDI7F2331MV90BNC EDI7F2331MV100BNC EDI7F2331MV120BNC EDI7F2331MV150BNC Speed (ns) 80 90 100 120 150 Package 361 361 361 361 361 Note: To order an Industrial grade product substitute the letter C in the Suffix with the letter I. PACKAGE NO. 361: 80 PIN SIMM (JEDEC) 4.655 MAX. 4.384 0.850 MAX. 0.250 R3 J2-1 J2-2 J2-3 P1 J1 J3 153 0.050 TYP. 0.062 R 0.170 MAX. 0.250 0.062 R 0.400 0.125 MIN. 0.225 MIN. 4.150 2.192 2.245 ALL DIMENSIONS ARE IN INCHES Sept. 2002 Rev. 2A ECO #15632 3 White Electronic Designs Corporation (508) 366-5151 www.whiteedc.com DATASHEET APPROVALS EDI PART NO. ECO# 15632 NEW REV 2A EDI7F331MV APPROVAL: INITIAL CORRECTION ON PAGES 9/30/02 JUAN GUZMAN L.K. MUKESH TRIVEDI DATE DATE 9/30/02 10/2/02 M.A. PAUL MARIEN 10/2/02 LARRY WINROTH DAVE KELLY MARK DOWNEY DAVE HARRISON TONY LEE BOB KHEDERIAN LUIS ESTELLA YES NO WILL THIS DATASHEET GO ON THE WEB? IS THIS A NEW DATASHEET? WILL THIS DATASHEET REPLACE AN EXISTING DATASHEET THAT’S ALREADY ON THE WEB? LINE:________ FAMILY:____________ PROD.TYPE:________ ORG:___________ DENSITY:________ SPEED:__________ PKG:____________ VOLTAGE:________ IF YES, WHAT DATASHEET IS IT REPLACING? WHAT SECTION SHOULD THIS DATASHEET BE PLACED IN ON THE WEB? AFTER REVIEWING OR MAKING CORRECTIONS ON THE DATASHEET (S) PLEASE SIGN-OFF ON THIS SHEET AND ,MAKE YOUR CORRECTIONS –ON THE ORIGINAL COPY(S). AFTER REVIEWING THE DATA SHEET, TEST ENGINEERING WILL COMPLETE THE SECTION BELOW. TEST PROGRAM CHANGE REQUIRED: YES:_________NO____________DATE:___________ TEST ENGINEER SIGNATURE___________________ IF YES, DO NOT RELEASE DATA SHEET UNTIL TEST PROGRAM CHANGE IS COMPLETED. TEST PROGRAM CHANGE COMPLETION DATE:__________ TEST PROGRAM NAME AND REVISION_________________ TEST ENGINEER SIGNATURE__________________________ FO-00342R1.DOC ECO# 14942 SHEET 1 OF 1