Issue date : July 2013 Multilayer Ceramic Chip Capacitors Commercial Grade Three-terminal Feed-through Type CKD Series Type: CKD710JB CKD610JB CKD61BJB 1005 [0402 inch]* 1608 [0603 inch]* 1608 [0603 inch]* * Dimensions Code JIS[EIA] All specifications are subject to change without notice. Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. (2/7) Conformity to RoHS Directive Lead-free Compatible Multilayer Ceramic Chip Capacitors Commercial Grade Three-terminal Feed-through Type Overview of CKD Series FEATURES Small capacitors featuring low ESL and high capacitance that realize low impedance characteristics. Effective for suppressing noise or voltage fluctuations in power circuits. For large current (Up to 2A) applications. APPLICATIONS For power lines of high-speed, large-current circuits of telecommunication terminal devices including smartphones, audio-visual equipment, and information equipment. PART NUMBER IDENTIFICATION CKD Series name 710JB 0G L x W dimensions GND terminal width Code mm 710JB 1.0×0.5 - 0.3 610JB 1.6×0.8 - 0.4 61BJB 1.6×0.8 - 0.8 Rated voltage Code V 0G 4 0J 6.3 105 M Capacitance Code 105 pF 1,000,000 (1.0µF) Tolerance M S ±20% +50%/–20% 030 B Thickness Packing style Code 030 060 mm 0.3 0.6 Code A B D E Reel ø178 ø178 ø330 ø330 A Pitch 4mm 2mm 4mm 2mm TDK internal code PACKAGING STYLE AND SPECIFICATIONS Type CKD710JB CKD610JB CKD61BJB Package quantity (piece/reel) ø178 ø330 10,000 50,000 4,000 10,000 4,000 10,000 Single weight (g) 0.0008 0.0038 0.0038 Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. Please contact our Sales office when your application is considered the following: The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) All specifications are subject to change without notice. 001-01 / 20130725 / e4161_ckd.fm (3/7) Overview of CKD Series RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING Soldering Preheating Slow cooling (Natural cooling) 150˚C max. Temperature(˚C) 260˚C max. 0 60 seconds or more 10s max. HAND SOLDERING PRECAUTIONS FOR USE Before soldering, be sure to preheat components. The T preheating temperature must be 150°C max. with attention paid to thermal shock. Natural cooling of components in the air is recommended. On the other hand, when dipping them in a solvent for purposes, such as cleaning, make sure that the temperature difference (T) is 100°C. When performing hand soldering for circuit modification, apply the soldering iron to the copper foil area of the printed circuit board for 3 seconds or less. The temperature of the iron tip should not exceed 300°C. Use a wrist band to discharge static electricity in your body through the grounding wire. When incorporating the printed circuit board on which this product is mounted into a frame, etc., do not apply stress to the product through local bending of the board by tightening of screws, etc. 0 150˚C max. Temperature(˚C) 300 Preheating Make as short as possilble (within three seconds) All specifications are subject to change without notice. 001-01 / 20130725 / e4161_ckd.fm (4/7) CKD Series CKD710JB Type 0.17± 0.08 0.19 3 OUT/IN 0.30 0.70 0.25 1 IN/OUT 0.60 GND 4 2 GND 1.00± 0.05 Land pattern+Solder resist Land pattern Dimensions in mm 0.30±0.05 0.55±0.05 0.30± 0.08 RECOMMENDED LAND PATTERN 0.25 SHAPES AND DIMENSIONS * Make sure to connect the GND terminal of this product and the GND of the mounting circuit board by using through holes so that the distance between them is the shortest. ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE Part No. Capacitance (µF) Tolerance (%) CKD710JB0J474M030 A CKD710JB0J474S030 A CKD710JB0G105M030 A CKD710JB0G105S030 A 0.47 0.47 1.0 1.0 ±20 +50/–20 ±20 +50/–20 Rated voltage Edc (V) 6.3 6.3 4 4 Rated current Idc (A) 2 2 2 2 Operating temperature range (°C) –55 to +105 –55 to +105 –55 to +105 –55 to +105 : Please specify packing style code, B (ø178 reel 2mm-pitch) or E (ø330 reel 2mm-pitch). ELECTRICAL CHARACTERISTICS GRAPH (EXAMPLE) INSERTION LOSS vs. FREQUENCY CHARACTERISTICS 0 10 Insertion loss(dB) 20 0J474 30 0G105 40 50 60 70 80 90 0.1 1 10 100 Frequency (MHz) 1000 10000 All specifications are subject to change without notice. 001-01 / 20130725 / e4161_ckd.fm (5/7) CKD Series CKD610JB Type SHAPES AND DIMENSIONS 0.1min. 0.40 1 IN/OUT 0.400.40 GND 4 0.60 0.80±0.10 0.40± 0.10 RECOMMENDED LAND PATTERN 3 OUT/IN Land pattern+Solder resist Land pattern 2 GND 1.60± 0.10 1.00 Dimensions in mm 0.60±0.10 0.60 * Make sure to connect the GND terminal of this product and the GND of the mounting circuit board by using through holes so that the distance between them is the shortest. ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE Part No. Capacitance (µF) Tolerance (%) CKD610JB0J475M060 A CKD610JB0J475S060 A 4.7 4.7 ±20 +50/–20 Rated voltage Edc (V) 6.3 6.3 Rated current Idc (A) 2 2 Operating temperature range (°C) –55 to +85 –55 to +85 : Please specify packing style code, A (ø178 reel 4mm-pitch) or D (ø330 reel 4mm-pitch). ELECTRICAL CHARACTERISTICS GRAPH (EXAMPLE) INSERTION LOSS vs. FREQUENCY CHARACTERISTICS 0 10 Insertion loss(dB) 20 30 40 50 60 70 80 90 0.1 1 10 100 Frequency (MHz) 1000 10000 All specifications are subject to change without notice. 001-01 / 20130725 / e4161_ckd.fm (6/7) CKD Series CKD61BJB Type SHAPES AND DIMENSIONS 0.80 3 OUT/IN 1 IN/OUT Land pattern+Solder resist Land pattern 0.60±0.10 0.15± 0.10 2 GND 1.60± 0.10 0.40 GND 4 0.400.40 0.15± 0.10 0.40±0.10 0.80±0.10 0.80 +0.20 –0.10 RECOMMENDED LAND PATTERN 0.40 1.20 Dimensions in mm * Make sure to connect the GND terminal of this product and the GND of the mounting circuit board by using through holes so that the distance between them is the shortest. ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE Part No. Capacitance (µF) Tolerance (%) CKD61BJB0J105M060 A CKD61BJB0J105S060 A CKD61BJB0J475M060 A CKD61BJB0J475S060 A 1.0 1.0 4.7 4.7 ±20 +50/–20 ±20 +50/–20 Rated voltage Edc (V) 6.3 6.3 6.3 6.3 Rated current Idc (A) 2 2 2 2 Operating temperature range (°C) –55 to +105 –55 to +105 –55 to +85 –55 to +85 : Please specify packing style code, A (ø178 reel 4mm-pitch) or D (ø330 reel 4mm-pitch). ELECTRICAL CHARACTERISTICS GRAPH (EXAMPLE) INSERTION LOSS vs. FREQUENCY CHARACTERISTICS 0 10 Insertion loss(dB) 20 30 0J105 40 0J475 50 60 70 80 90 0.1 1 10 100 Frequency (MHz) 1000 10000 All specifications are subject to change without notice. 001-01 / 20130725 / e4161_ckd.fm (7/7) CKD Series Packing Style REEL DIMENSIONS C B E r W D t A Dimensions in mm Reel ø178 ø330 A ø178±2.0 ø382 max.(ø330 nom.) B ø60±2.0 ø50 min. C ø13±0.5 ø13±0.5 D ø21±0.8 ø21±0.8 E 2.0±0.5 2.0±0.5 W 9.0±0.3 10.0±1.5 t 2.0±0.05 2.0±0.05 r 1.0 1.0 TAPE DIMENSIONS Paper tape(Apply to the product less than 1.0 mm thick) J Square punch hole for component mounting D B C E Round sprocket holes t A H G F Dimensions in mm Type CKD710 CKD610 CKD61B A 0.62 typ. B 1.12 typ. C 8.0±0.3 D 3.5±0.05 E 1.75±0.1 F 2.0±0.1 G 2.0±0.05 H 4.0±0.1 J ø1.5+0.1/–0 t 1.1 max. 1.10 typ. 1.90 typ. 8.0±0.3 3.5±0.05 1.75±0.1 4.0±0.1 2.0±0.05 4.0±0.1 ø1.5+0.1/–0 1.1 max. Plastic tape J Square punch hole for component mounting C B D E Round sprocket holes t A H G F Q K All specifications are subject to change without notice. 001-01 / 20130725 / e4161_ckd.fm