LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS TXH Long life snap-ins, 105℃ TXH Series ・Endurance with ripple current : 10,000 hours at 105℃ ・Non solvent resistant type ・RoHS Compliant Longer life LXM P272 ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +105℃ 200 to 450Vdc ±20% (M) I≦3 CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 200 to 400V 450V tanδ (Max.) 0.15 0.20 Rated voltage (Vdc) 200 to 400V 450V Z (-25℃)/Z (+20℃) 4 8 Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 5 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 10,000 hours at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±15% of the initial value D.F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] Code : VS (φ30 toφ40) : Standard Sleeve (PET : Brown) ●Terminal PC board pin-out (View from Solder side) Negative mark Code : LI (φ35,φ40) Sleeve (PET : Brown) Negative mark Vent φD+1max. φD+1max. 10 2-1.2×6 2-φ2 *4.0±0.5 L±2 PC board pin-out (View from Solder side) Vent *φD=40mm : 3.5±0.5mm 4.2±0.5 ●Terminal 5±0.5 L±2 ** 4.5±1 14.2±1 **φD=40mm : 4.0±1 The standard design has no plastic disc. ◆PART NUMBERING SYSTEM 1 2 3 4 E T XH 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 470µF:471, 1,000µF:102) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 200V:201 , 450V:451) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 270 CAT. No. E1001Q LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105℃ TXHSeries ◆STANDARD RATINGS WV (Vdc) 200 250 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 560 680 820 820 1,000 1,000 1,000 1,200 1,200 1,500 1,500 1,800 390 470 560 680 680 820 820 820 1,000 1,000 1,200 1,200 1,500 1,800 30 ×30 30 ×35 30 ×40 35 ×30 30 ×45 35 ×35 40 ×30 35 ×40 40 ×35 35 ×50 40 ×40 40 ×50 30 ×30 30 ×35 35 ×30 30 ×45 35 ×35 30 ×50 35 ×40 40 ×30 35 ×45 40 ×35 35 ×50 40 ×40 40 ×50 40 ×60 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.50 1.70 2.00 2.00 2.20 2.20 2.17 2.40 2.45 2.81 2.79 3.24 1.30 1.42 1.58 1.80 1.76 2.03 2.01 1.96 2.30 2.27 2.55 2.53 2.96 3.39 WV (Vdc) Part No. ETXH201VSN561MR30S ETXH201VSN681MR35S ETXH201VSN821MR40S ETXH201VSN821MA30S ETXH201VSN102MR45S ETXH201VSN102MA35S ETXH201VSN102MB30S ETXH201VSN122MA40S ETXH201VSN122MB35S ETXH201VSN152MA50S ETXH201VSN152MB40S ETXH201VSN182MB50S ETXH251VSN391MR30S ETXH251VSN471MR35S ETXH251VSN561MA30S ETXH251VSN681MR45S ETXH251VSN681MA35S ETXH251VSN821MR50S ETXH251VSN821MA40S ETXH251VSN821MB30S ETXH251VSN102MA45S ETXH251VSN102MB35S ETXH251VSN122MA50S ETXH251VSN122MB40S ETXH251VSN152MB50S ETXH251VSN182MB60S 400 450 Cap (µF) 220 270 270 330 330 330 390 390 470 470 560 560 680 820 220 220 270 270 330 330 390 470 560 Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 30 × 35 30 × 40 35 × 30 30 × 45 35 × 35 40 × 30 30 × 50 35 × 40 35 × 45 40 × 35 35 × 50 40 × 40 40 × 50 40 × 60 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50 40 × 60 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.00 1.15 1.13 1.29 1.26 1.28 1.44 1.43 1.60 1.58 1.79 1.78 2.05 2.36 1.04 1.02 1.19 1.16 1.33 1.32 1.48 1.64 1.98 Part No. ETXH401VSN221MR35S ETXH401VSN271MR40S ETXH401VSN271MA30S ETXH401VSN331MR45S ETXH401VSN331MA35S ETXH401VSN331MB30S ETXH401VSN391MR50S ETXH401VSN391MA40S ETXH401VSN471MA45S ETXH401VSN471MB35S ETXH401VSN561MA50S ETXH401VSN561MB40S ETXH401VSN681MB50S ETXH401VSN821MB60S ETXH451VSN221MR40S ETXH451VSN221MA30S ETXH451VSN271MR45S ETXH451VSN271MA35S ETXH451VSN331MR50S ETXH451VSN331MA40S ETXH451VSN391MA45S ETXH451VSN471MA50S ETXH451VSN561MB60S ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) 200, 250Vdc 400, 450Vdc 50 0.81 0.77 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k 1.45 1.41 50k 1.50 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 271 CAT. No. E1001Q