UTC DTC114TL-AE3-6-R Npn digital transistor npn digital transistor Datasheet

UNISONIC TECHNOLOGIES CO., LTD
DTC114T
NPN SILICON TRANSISTOR
NPN DIGITAL TRANSISTOR
(BUILT- IN BIAS RESISTORS)
„
FEATURES
* Built-in bias resistors that implies easy ON/OFF applications.
* The bias resistors are thin-film resistors with complete isolation to
allow negative input.
„
EQUIVALENT CIRCUIT
*Pb-free plating product number:DTC114TL
„
ORDERING INFORMATION
Order Number
Normal
Lead Free Plating
DTC114T-AE3-6-R
DTC114TL-AE3-6-R
DTD114T-AL3-6-R
DTD114TL-AL3-6-R
DTC114T-AN3-6-R
DTC114TL-AN3-6-R
„
Package
SOT-23
SOT-323
SOT-523
Pin Assignment
1
2
3
E
B
C
E
B
C
E
B
C
Packing
Tape Reel
Tape Reel
Tape Reel
MARKING
www.unisonic.com.tw
Copyright © 2005 Unisonic Technologies Co., Ltd
1 of 3
QW-R206-054,B
DTC114T
„
NPN SILICON TRANSISTOR
ABSOLUTE MAXIMUM RATINGS (Ta=25℃)
PARAMETER
Collector-Base Voltage
Collector-Emitter Voltage
Emitter-Base Voltage
Collector Current
RATINGS
UNIT
50
V
50
V
5
V
100
mA
SOT-23/SOT-323
200
mW
Collector Power Dissipation
PC
SOT-523
150
mW
Junction Temperature
TJ
150
℃
Storage Temperature
TSTG
-55 ~ +150
℃
Note Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
„
SYMBOL
VCBO
VCEO
VEBO
IC
ELECTRICAL CHARACTERISTICS (Ta=25°C, unless otherwise specified)
PARAMETER
Collector-Base Breakdown Voltage
Collector-Emitter Breakdown Voltage
Emitter-Base Breakdown Voltage
Collector-Emitter Saturation Voltage
Collector Cut-off Current
Emitter Cut-off Current
DC Current Gain
Input Resistance
Current Gain Bandwidth Product
SYMBOL
BVCBO
BVCEO
BVEBO
VCE(SAT)
ICBO
IEBO
hFE
RIN
fT
TEST CONDITIONS
IC=50μA
IC=1mA
IE=50μA
IC=10mA, IB=1mA
VCB=50V
VEB=4V
VCE=5V, IC=1mA
VCE=10V, IE=-5mA, f=100MHz
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
50
50
5
100
7
TYP
300
10
250
MAX
0.3
0.5
0.5
600
13
UNIT
V
V
V
V
μA
μA
kΩ
MHz
2 of 3
QW-R206-054,B
DTC114T
„
NPN SILICON TRANSISTOR
TYPICAL CHARACTERISTICS
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R206-054,B
Similar pages