6&5 'HVFULSWLRQ %72 Series R The BT152 is a thyristor, it uses UTC’s advanced technology to provide customers with high bidirectional blocking voltage capability and high thermal cycling performance, etc. The BT152 is suitable for motor control, industrial, static switching, heating and domestic lighting, etc. Features * High bidirectional blocking voltage capability * High thermal cycling performance 6\PERO ① ② ③ Ordering Information Part No. Package Packing BT152-400R BT152-650R TO-220 50pcs / Tube TO-220 50pcs / Tube BT152-800R TO-220 50pcs / Tube BT152F-400R BT152F-650R ITO-220 50pcs / Tube ITO-220 50pcs / Tube BT152F-800R ITO-220 50pcs / Tube Mar.2015-REV.00 www.sddydz.com 1 of 5 %72 Series R 6&5 ABSOLUTE MAXIMUM RATING (TJ = 25°C, unless otherwise stated) PARAMETER SYMBOL RATINGS 450 650 800 13 20 200 220 200 BT152(F)-400R Repetitive Peak Off-State Voltages BT152(F)-650R VDRM, VRRM BT152(F)-800R UNIT V IT(AV) A Average On-State Current (half sine wave; Tmb ≤103°C) RMS on-State Current (all conduction angles) IT(RMS) A t = 10 ms Non-Repetitive Peak On-State Current A ITSM (half sine wave; TJ = 25 °C prior to surge) t = 8.3 ms I2t for Fusing (t = 10 ms) I2t A2s Repetitive Rate of Rise of On-State Current After Triggering dIT /dt A/μs 200 (ITM = 50 A; IG = 0.2 mA; dIG /dt = 0.2 mA/μs) Peak Gate Current IGM A 5 Peak Gate Voltage VGM 5 V Peak Reverse Gate Voltage VRGM 5 V Peak Gate Power PGM W 20 Average Gate Power (Over any 20 ms period) PG(AV) 0.5 W Operating Junction Temperature TJ 125 °C Storage Temperature TSTG -40 ~150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Ambient In Free Air Thermal Resistance Junction to Mounting Base SYMBOL θJA θJMB MIN TYP 60 MAX UNIT K/W K/W 1.1 STATIC CHARACTERISTICS (TJ = 25°C, unless otherwise stated) PARAMETER Gate Trigger Current Latching Current Holding Current On-State Voltage SYMBOL IGT IL IH VT Gate Trigger Voltage VGT Off-State Leakage Current I D , IR CONDITIONS VD = 12 V, IT = 0.1 A VD = 12 V, IGT = 0.1 A VD = 12 V, IGT = 0.1 A IT=40A MIN VD = 12 V, IT = 0.1 A VD = VDRM(max) , IT = 0.1 A, TJ = 125 °C VD = VDRM(max) , VR = VRRM(max) ,TJ = 125°C 0.25 TYP 4 13 12 1.4 0.7 0.4 0.2 MAX 5 80 60 1.75 1.5 UNIT mA mA mA V 1.0 mA V DYNAMIC CHARACTERISTICS (TJ = 25°C, unless otherwise stated) PARAMETER Critical Rate of Rise of Off-State Voltage SYMBOL CONDITIONS dVD /dt VDM = 67% VDRM(max), TJ = 125 °C, exponential waveform;Gate open circuit MIN MAX 200 300 V/μs UNIT Gate Controlled Turn-on Time tGT ITM = 40 A, VD = VDRM(max), IG = 0.1 A, dIG /dt = 5 A/μs 2 μs Circuit Commutated Turn-off tIme tQ ITM = 50 A, VR = 25 V, dITM /dt = 30 A/μs, dVD /dt = 50 V/μs, RGK = 100 Ω 70 μs Mar.2015-REV.00 www.sddydz.com 2 of 5 6&5 %72 Series R TO-220 Mechanical Drawing ITO-220 Mechanical Drawing Mar,2015-REV.00 www.sddydz.com 5 of 5