PRODUCT DATASHEET Florentina series last update 4/10/2016 DETAILS Product Number FC14974_FLORENTINA-2X2-O Family Florentina Type Pack Color black Diameter 95,57x95,57 mm Height 17,72 mm Style square Optic Material PC Holder Material Fastening pin, screw Status production ready ROHS Comliant Yes Date Updated 4/10/2016 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector XP-L 44+18 deg 70 % 2.500 - XHP35 HD 43+20 deg 72 % 2.200 - LUXEON TX 46+15 deg 75 % 3.000 - LUXEON MZ 44+18 deg 70 % 2.400 - NVSxx19B/NVSxx19C 44+17 deg 73 % 2.700 - Oslon Square EC 45+15 deg 74 % 2.800 - Oslon Square Gen3 46+15 deg 70 % 2.900 - June 9th 2017 5:36 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C D E F G H 95.57 LED middle position 2 4 40 4 20 1 67 40 83.52 95.57 3 3 3 3 . 2 2 Optional attachment 1 Optional attachment 2 Oval beam direction 83.59 Isometric view Scale: 1:1 Isometric view Scale: 1:1 Assembly: 3. 3 1. One nut per side for rotational attachment 2. Two per side for fixed beam direction Recommendations: Side view 16.88 20 40 Screw type DIN 7985 M3, max. torque 0.6Nm Compatible with Strada-2X2MX PCB Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: up to 30mm class M, otherwise class C According to DIN ISO 2768-2 Form and position: class L 1 THIRD ANGLE PROJECTION: INDEX PART NO DESCRIPTION 1 2 3 H 2 Optional side attachment: The holder can also be attached with DIN 7985 M3 nuts 9.9 31.17 2 1. Attach lenses by pressing them down until they snap into place. 2. Screw the holder (with lenses assembled) to PCB. Inspect that the positioning pins are securely in their holes. 3. Press the shade down on the holder until they are securely attached. G C14734 C14735 CMC / MRK lenses FLORENTINA-2X2-SHD FLORENTINA-2X2-HLD MATERIAL PC PC COLOUR black black This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE FLORENTINA-2x2-O assembly SIZE A3 SCALE 1 PART NUMBER 1:1 WEIGHT - B SHEET A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value.