PCB DRILLING DETAILS ORDERING INFORMATION TECHNICAL SPECIFICATIONS I MATERIAL SHELL INSULATORS : STEEL TIN/Zinc Cr 3 PLATED. : SELF EXTINGUISHING BLACK POLYESTER UL CLASS 94V0 IF WE USE PROTECTIVE ADHESIVE (type Kapton or Teflon) 09,15,25 & 37 : COPPER ALLOY : GOLD OVER NICKEL TERMINATION ZONE : TIN LEAD OVER NICKEL FOR LEAD FREE PLATING : 2 µ MIN.MATTE TIN TOP OVER 1.27 µ MIN.NICKEL UNDER PLATE(ON TERMINATION ZONE) METAL BRACKET : BRASS,TIN/Zinc Cr3 PLATED. HARPOON : BRASS,TIN PLATED. SCREW LOCK : BRASS,TIN/Zinc Cr3 PLATED. ELECTRICAL DATA MAX.CURRENT RATING : 5A TEST VOLTAGE : 1000V RATED VOLTAGE : 300V CONTACT RESISTANCE : < 25m Ω SHELL RESISTANCE : < 5m Ω INSULATION RESISTANCE : > 5000M Ω : -55°C +125°C 5 P 3 3 E 4 G V 0 0 L F SERIES NO.OF CONTACTS PLATING ACTIVE ZONE 2 THE HOUSING WILL WITHSTAND EXPOSURE TO 260-265°C OR PROTECTIVE METALLIC DEVICE CONTACTS D LEAD FREE SPECIAL CODE TYPE OF CONTACTS 00->STANDARD P-PIN TYPE OF TERMINATION MOUNTING OPTIONS 33-ANGLED SPILL GV->HARPOON+F.SCREW LOCK UNC 4 40+METAL BRACKET PV->FEMALE SCREW LOCK UNC 4.40 PITCH 2.84 USA FOOT PRINT 8.08 USA GI->HARPOON+F.SCREW LOCKM3+METAL BRACKET PLATING HEIGHT OF TERMINATION 4->FLASH Au+Sn/Sn Pb 6->0.76µ Au+Sn/Sn Pb E-3.18 US STANDARD "This LF product meets European Union Directives and other country regulations as described in GS-22-008" The housing will withstand exposure to 260°C peak temperature for 3.5 seconds in a wave solder application with a 1.6mm minimum thick circuit board. Packaging as per GS-14-920 DELTA-D ENVIRONMENTAL CHARACTERISTICS. OPERATING TEMPERATURE RANGE D I06-0074 GVJ 2006/06/08 .00±0.1 MECHANICAL CHARACTERISTICS MATING/UNMATING CYCLES (MIN) : 200 (FLASH Au); 500 (0.76µ Au) INSERTION/EXTRACTION FORCE PER CONTACT : 5 N Max./ 0.3 N Min. 0°±1° .000±.00X GEORGE.V.JOSEPH 1998/12/16 GEORGE.V.JOSEPH 1998/12/16 GEORGE.V.JOSEPH 2006/06/22 K_V_SIVADAS 2006/06/22 C-DD-0024 D 1 6 PDM: Rev:D STATUS:Released Printed: Jan 18, 2011.