POWER AVD75 Series 75 Watts Data Sheet Total Power: 75 Watts Input Voltage:36 - 75 V # of Outputs: Single SPECIAL FEATURES 2:1 Wide input range Optimised for high density, small space applications Low ripple and noise Fixed switching frequency High efficiency High capacitive load capability Pre-bias start-up capability Basic insulation system Through hole or SMT termination Openframe structure with baseplate option Two year warranty SAFETY UL, cUL: UL60950 TUV/CE: IEC/EN60950 Electrical Specifications Input Input range 36 - 75 Vdc Efficiency 92% @ 3.3 V; 84% @ 1.2 V Output Voltage tolerance +/-1.5% Line regulation 0.2% Load regulation Single output: 0.5% @ 3.3 V; 0.25% @ 1.2 V Noise/ripple 3.3 Vo: 70 mV 1.2Vo: 45 mV Over voltage protection Over temperature protection Auto-restart Switching frequency 1.2V: 270 KHz, 3.3V: 250 KHz Temperature coefficien ±0.02 /°C Isolation I/O isolation: 1500 Vdc min. Environmental Specifications Operating ambient temperature range -40 °C to +85 °C Storage temperature -55 °C to +125 °C Humidity 5% to 95% (non-condensing) MTBF 2 Million hours RoHS Compliant AVD75 Series Data Sheet Ordering Information Model number Input voltage Output voltage Power AVD75-48S3V3-6L 36 - 75 Vin 3.3 V @ 20 A 66 W AVD75-48S3V3P-6L 36 - 75 Vin 3.3 V @ 20 A 66 W AVD75-48S3V3B-6L 36 - 75 Vin 3.3 V @ 20 A 66 W AVD75-48S3V3PB-6L 36 - 75 Vin 3.3 V @ 20 A 66 W AVD75-48S1V2TL 36 - 75 Vin 1.2 V @ 25 A 30 W AVD75-48S1V2-6L 36 - 75 Vin 1.2 V @ 25 A 30 W AVD75-48S1V2B-6L 36 - 75 Vin 1.2 V @ 25 A 30 W Notes: Standard version is negative enable -6 = 3.8 mm pin length -T = Surface mount, reel tape package -S = Surface mount, tray package -L = RoHS 6 compliance -P = Positive enable Mechanical Drawings 22.90[0.902] 15.24 [0.600] 33[1.299] 4 3 5 2 6 7 1 8 Notes: 15.24[0.600] 7.62[0.300] BOTTOM VIEW 28.00[1.102] 2-Ø2.3±0.1 2-Ø1.5±0.1 LOAD BOARD 0.3[0.12]MIN 6-Ø1.8±0.1 L 10.5[0.413] SIDE VIEW 6-Ø1.0±0.1 UNIT: mm[inch] BOTTOM VIEW: pin on upside TOLERANCE: X.Xmm±0.5mm[X.XX in.±0.02in.] X.XXmm±0.25mm[X.XXX in.±0.01in.] 1. All specifications are subject to change without notice. Mechanical drawings are for reference only. 2. Label and logo appearance may vary from what is shown on mechanical drawings. AVD75 Series Data Sheet Pin Assignments Pin # Function 1 +V in 2 Enable 3 -V in 4 -V out 5 - Sense 6 Trim 7 +Sense 8 +V out WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. www.artesyn.com For more information: www.artesyn.com/power For support: [email protected] AVD75 Series-DS 14Oct2016