ATP207 Ordering number : ENA1319A SANYO Semiconductors DATA SHEET N-Channel Silicon MOSFET ATP207 General-Purpose Switching Device Applications Features • • • Low ON-resistance 4.5V drive Halogen free compliance Large current Slim package Protection diode in • • • Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Drain-to-Source Voltage Conditions Ratings VDSS VGSS Gate-to-Source Voltage Drain Current (DC) ID IDP Drain Current (PW≤10μs) Allowable Power Dissipation Unit 40 PW≤10μs, duty cycle≤1% V 65 A 195 A 50 W Channel Temperature PD Tch 150 °C Storage Temperature Tstg --55 to +150 °C Avalanche Energy (Single Pulse) *1 EAS IAV 35 mJ 33 A Avalanche Current *2 Tc=25°C V ±20 Note : *1 VDD=10V, L=50μH, IAV=33A *2 L≤50μH, Single pulse Package Dimensions Product & Package Information unit : mm (typ) 7057-001 • Package : ATPAK • JEITA, JEDEC :• Minimum Packing Quantity : 3,000 pcs./reel ATP207-TL-H 1.5 6.5 0.4 0.4 0.5 4 Packing Type: TL 4.6 2.6 Marking ATP207 TL 6.05 4.6 9.5 7.3 LOT No. Electrical Connection 2.3 0.6 2.3 0.55 0.7 3 0.1 0.5 1 0.8 1.7 2,4 2 0.4 1 : Gate 2 : Drain 3 : Source 4 : Drain 1 3 SANYO : ATPAK http://semicon.sanyo.com/en/network 61312 TKIM/91708PA TIIM TC-00001572 No. A1319-1/7 ATP207 Electrical Characteristics at Ta=25°C Parameter Symbol Drain-to-Source Breakdown Voltage V(BR)DSS Zero-Gate Voltage Drain Current IDSS Gate-to-Source Leakage Current IGSS Cutoff Voltage VGS(off) Forward Transfer Admittance | yfs | Static Drain-to-Source On-State Resistance RDS(on)2 ID=17A, VGS=4.5V Ciss Output Capacitance Coss Reverse Transfer Capacitance Turn-ON Delay Time Turn-OFF Delay Time VGS=±16V, VDS=0V VDS=10V, ID=1mA RDS(on)1 Ratings min typ Unit max 40 ID=1mA, VGS=0V VDS=40V, VGS=0V VDS=10V, ID=33A ID=33A, VGS=10V Input Capacitance Rise Time Conditions V 1.5 12 1 μA ±10 μA 2.6 20 V S 7 9.1 mΩ 11 15.5 mΩ 2710 pF 330 pF Crss 220 pF td(on) tr 27 ns 290 ns 170 ns Fall Time td(off) tf Total Gate Charge Qg Gate-to-Source Charge Qgs Gate-to-Drain “Miller” Charge Qgd Diode Forward Voltage VSD VDS=20V, f=1MHz See specified Test Circuit. VDS=20V, VGS=10V, ID=65A 110 ns 54 nC 14 nC 11 IS=65A, VGS=0V 1.0 nC 1.2 V Switching Time Test Circuit 10V 0V VDD=20V VIN ID=33A RL=0.61Ω VIN D PW=10μs D.C.≤1% VOUT G ATP207 P.G 50Ω S Ordering Information Device ATP207-TL-H Package Shipping memo ATPAK 3,000pcs./reel Pb Free and Halogen Free No. A1319-2/7 ATP207 ID -- VDS V 40 30 50 40 30 VGS=3.5V 20 10 Tc=25°C Single pulse 10 1.0 1.5 Drain-to-Source Voltage, VDS -- V RDS(on) -- VGS Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ 25 33A 15 10 5 4 6 8 10 12 14 Gate-to-Source Voltage, VGS -- V 10 Tc= 7 Source Current, IS -- A Forward Transfer Admittance, | yfs | -- S C 25° 5°C --2 75°C 5 3 2 7 5 2 3 5 7 1.0 2 3 5 7 10 2 3 Drain Current, ID -- A 5 4.5 5.0 15 10 =33A V, I D =10.0 VGS 5 --40 --20 0 20 40 60 80 100 120 IS -- VSD 100 7 5 3 2 10 7 5 3 2 tf 100 7 5 tr td(on) 3 160 VGS=0V Single pulse 0 0.2 0.4 0.6 0.8 1.0 1.2 Ciss, Coss, Crss -- VDS 1.4 IT14028 f=1MHz Ciss 3 td(off) 140 IT14026 5 2 6.0 A 7 VDD=20V VGS=10V 3 5.5 IT14024 =17 V, I D =4.5 VGS Diode Forward Voltage, VSD -- V Ciss, Coss, Crss -- pF Switching Time, SW Time -- ns 7 5 7 100 IT14027 SW Time -- ID 1000 4.0 20 1.0 7 5 3 2 0.1 7 5 3 2 0.01 7 5 3 2 0.001 1.0 3 0.1 3.5 Case Temperature, Tc -- °C 3 2 3.0 Single pulse 0 --60 16 VDS=0V Single pulse 5 2.5 RDS(on) -- Tc IT14025 | yfs | -- ID 7 2.0 1.5 Gate-to-Source Voltage, VGS -- V 0 2 1.0 25 20 0 0.5 0 IT14023 Tc=25°C Single pulse ID=17A 0 2.0 5°C 25°C --25°C 0.5 Tc= 7 0 Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ 0 25 ° C 20 C 4.0V 5°C 50 60 --25° 60 70 Tc= 7 Drain Current, ID -- A 10. V 70 80 4.5V 1 6 .0 Drain Current, ID -- A 80 VDS=10V Single pulse 90 0V 90 ID -- VGS 100 6.0 8.0V 100 2 1000 7 5 Coss 3 Crss 2 2 100 10 0.1 2 3 5 7 1.0 2 3 5 7 10 Drain Current, ID -- A 2 3 5 7 100 IT14029 7 0 5 10 15 20 25 30 Drain-to-Source Voltage, VDS -- V 35 40 IT14030 No. A1319-3/7 ATP207 VGS -- Qg 10 3 2 7 6 10 0 20 30 40 50 Total Gate Charge, Qg -- nC PD -- Tc 60 30 20 10 0 40 60 80 100 3 5 7 1.0 120 Case Temperature, Tc -- °C 140 160 IT14010 2 3 5 7 10 2 3 Drain-to-Source Voltage, VDS -- V 5 7 IT14032 EAS -- Ta 120 40 20 2 IT14031 50 0 Tc=25°C Single pulse 0.1 0.1 Avalanche Energy derating factor -- % 60 Allowable Power Dissipation, PD -- W 1.0 7 5 3 2 1 0 Operation in this area is limited by RDS(on). 3 2 n 2 0μ s io 3 3 2 10 7 5 s 10 m 0m s s 10 at er 4 ID=65A op 5 100 7 5 PW≤10μs 10 μs 10 1m C Drain Current, ID -- A 8 IDP=195A D Gate-to-Source Voltage, VGS -- V 9 ASO 5 VDS=20V ID=65A 100 80 60 40 20 0 0 25 50 75 100 125 Ambient Temperature, Ta -- °C 150 175 IT14011 No. A1319-4/7 ATP207 Taping Specification ATP207-TL-H No. A1319-5/7 ATP207 Outline Drawing ATP207-TL-H Land Pattern Example Mass (g) Unit 0.266 mm * For reference Unit: mm 6.7 6.5 1.6 2 1.5 2.3 2.3 No. A1319-6/7 ATP207 Note on usage : Since the ATP207 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of June, 2012. Specifications and information herein are subject to change without notice. PS No. A1319-7/7