DOMINANT Opto Technologies Innovating Illumination TM DATA SHEET: Right Angle DomiLEDTM InGaN Warm White : DSF-LSG Carrier Tape Change for all Right Angle DomiLED DSx Product Change Notice issued on 18 May 2015. DomiLED TM Synonymous with function and performance, the DomiLED series is perfectly suited for a variety of cross-industrial applications due to its small package outline, durability and superior brightness. TM Features: > > > > > > High brightness surface mount LED. Designed for sideway illumination. 120° viewing angle. Small package outline. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Applications: > > > > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. Consumer Appliances: LCD illumination as in PDAs, LCD TV. Display: full color display video notice board. Industry: white goods (eg: Oven, microwave, etc.). © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 02/05/2014 V2.0 DOMINANT TM InGaN Warm White : DSF-LSG Opto Technologies Innovating Illumination Optical Characteristics at Tj=25˚C Part Ordering Number DSF-LSG-WX1-1 Color Luminous Intensity @ 20mA IV (mcd) Min. Typ. Max. Viewing Angle˚ White 120 1125.0 1800.0 2240.0 NOTE 1. All part number above comes in a quantity of 2500 units per reel. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. Color binning is carried for all units as per the color-binning table. Only one color group is allowed for each reel. Electrical Characteristics at Tj=25˚C Vf @ If = 20mA Part Number Vr @ Ir = 10uA Min. (V) Typ. (V) Max. (V) Min. (V) 2.8 3.2 3.6 5.0 DSF-LSG Forward voltage, Vf is measured with an accuracy of ± 0.1 V. Absolute Maximum Ratings Maximum Value Unit DC forward current 20 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.005) 100 mA 5 V ESD threshold (HBM) 2000 V LED junction temperature 125 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +100 ˚C 80 mW 460 K/W 240 K/W Reverse voltage; Ir (max) = 10uA Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounting on FR4 PCB, pad size >= 5 mm2 per pad) 2 02/05/2014 V2.0 DOMINANT TM InGaN Warm White : DSF-LSG Opto Technologies Innovating Illumination Color Bin - Warm White Color Bin Structure Chromaticity coordinate groups are measured with an accuracy of ± 0.01. Bin RM RN RO RP QM QN QO QP PM PN PO PP 1 2 3 4 0.421 Cx 0.402 0.396 0.415 Cy 0.421 0.404 0.416 0.433 0.415 Cx 0.396 0.392 0.409 Cy 0.404 0.389 0.399 0.416 0.409 Cx 0.392 0.387 0.402 Cy 0.389 0.373 0.382 0.399 0.402 Cx 0.387 0.382 0.397 Cy 0.373 0.358 0.367 0.382 0.415 Cx 0.421 0.437 0.430 Cy 0.433 0.438 0.421 0.416 0.409 Cx 0.415 0.430 0.423 Cy 0.416 0.421 0.405 0.400 0.402 Cx 0.409 0.423 0.416 Cy 0.400 0.405 0.387 0.382 0.397 Cx 0.402 0.416 0.409 Cy 0.382 0.387 0.372 0.367 0.430 Cx 0.437 0.452 0.444 Cy 0.438 0.443 0.426 0.421 0.423 Cx 0.430 0.444 0.436 Cy 0.421 0.426 0.409 0.405 0.416 Cx 0.423 0.436 0.428 Cy 0.405 0.409 0.392 0.387 0.409 0.372 Cx 0.416 0.428 0.421 Cy 0.387 0.392 0.377 3 02/05/2014 V2.0 DOMINANT TM InGaN Warm White : DSF-LSG Opto Technologies Innovating Illumination 1 2 3 4 Cx 0.452 0.469 0.460 0.444 Cy 0.443 0.448 0.431 0.426 Cx 0.444 0.460 0.451 0.436 Cy 0.426 0.431 0.414 0.409 Cx 0.436 0.451 0.443 0.428 Cy 0.409 0.414 0.397 0.392 Cx 0.428 0.443 0.435 0.421 Cy 0.392 0.397 0.382 0.377 Cx 0.469 0.487 0.477 0.460 Cy 0.448 0.454 0.437 0.431 Cx 0.460 0.477 0.467 0.451 Cy 0.431 0.437 0.420 0.414 Cx 0.451 0.467 0.458 0.443 Cy 0.414 0.420 0.403 0.397 Cx 0.443 0.458 0.449 0.435 Cy 0.397 0.403 0.388 0.382 Bin NM NN NO NP MM MN MO MP InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance. Current pulsing should be used for dimming purposes. 4 02/05/2014 V2.0 DOMINANT TM InGaN Warm White : DSF-LSG Opto Technologies Innovating Illumination Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group W1 1125.0 ... 1400.0 W2 1400.0 ...1800.0 X1 1800.0 ... 2240.0 Luminous intensity is measured with an accuracy of ± 11%. 5 02/05/2014 V2.0 DOMINANT TM InGaN Warm White : DSF-LSG Opto Technologies Innovating Illumination Forward Forward Voltage Relative Current Flux Vs Vs Forward Current 2.5 1.4 1.2 Relative Flux; Normalized at 350mA Forward Current, mA Relative Intensity; Normalized at 350mA Relative Intensity; Normalized at 20mA RelativeIntensity IntensityVs VsForward ForwardCurrent Current Relative 2 1 1.5 0.8 0.6 1 0.4 0.5 0.2 00 00 10 200 20 400 30 40 1.450 1.2 40 1 30 0.8 0.6 20 0.4 10 0.2 00 600 50 02 2.5200 Relative Spectral Relative Intensity VsEmission Wavelength Forward Current Vs Forward Voltage Maximum Forward Current Vs Ambient Temperature 11 600 25 0.9 0.9 500 0.8 0.8 20 WarmWhite Relative Intensity Forward Current, mA Forward Current, mA 6004 Forward Current, mA Forward Voltage, V Forward ForwardCurrent, Current;mA mA 400 15 300 200 10 0.7 0.7 0.6 0.6 0.5 0.5 0.4 0.4 0.3 0.3 0.2 0.2 100 0.1 0.1 05 00 20 10 2.5 20 30 340 50 3.5 60 70 480 90 4.5 100 400 300 450 400 Ambient Forward Temperature Voltage, V 30° 20° 10° 1.0 350 40° 350 Forward Current, mA 300 0.6 200 0.4 60° 150 70° 0.2 100 80° 50 300 250 200 150 100 50 0 90° 700 800 400 0.8 50° 250 550600 600 700650 Forward Current Vs Solder Point Temperature 0° 400 500 500 Wavelength,nm nm Wavelength, Radiation Pattern Forward Current Vs Ambient Temperature (Rja=40K/W) Forward Current, mA 400 3.5 3 0 0 0 10 20 30 40 50 60 70 80 Ambient Temperature 90 100 0 6 20 40 60 80 100 02/05/2014 V2.0 Solder Point Temperature DOMINANT TM InGaN Warm White : DSF-LSG Opto Technologies Innovating Illumination DomiLED • InGaN Warm White : DSF-LSG Package Outlines TM Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Silicone Resin Soldering Leads Sn-Sn Plating 7 02/05/2014 V2.0 DOMINANT TM InGaN Warm White : DSF-LSG Opto Technologies Innovating Illumination Recommended Solder Pad 8 02/05/2014 V2.0 DOMINANT TM InGaN Warm White : DSF-LSG Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 2500 units. • Reel diameter is 180 mm. 9 02/05/2014 V2.0 DOMINANT Opto Technologies DOMINANT TM InGaN Warm White : DSF-LSG AllnGaP : DDx-xRS TM Innovating Illumination Opto Technologies Innovating Illumination Packaging Specification Packaging Specification 10 02/05/2014 V2.0 10 28/10/2010 V8.0 DOMINANT TM InGaN Warm White : DSF-LSG Opto Technologies Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Reel Label Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc Right Angle DomiLED 1 completed bag (2500pcs) 0.034 0.034 190 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For Right Angle DomiLED Cardboard Box Size TM Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 37,500 MAX Large 416 x 516 x 476 1.74 96 reels MAX 240,000 MAX 11 02/05/2014 V2.0 DOMINANT TM InGaN Warm White : DSF-LSG Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 225 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 12 02/05/2014 V2.0 DOMINANT TM InGaN Warm White : DSF-LSG Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - Initial Release 17 Jun 2013 10 Error on Packaging Specification 02 May 2014 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 13 02/05/2014 V2.0 DOMINANT TM Opto Technologies InGaN Warm White : DSF-LSG Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia. Tel: +606 283 3566 Fax: +606 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM