4 ITEM 3 CONNECTOR PART NO. 2 IPI CHECK DESCRIPTION 1 See Table 1 KR CONNECTOR 2 UL1061, 26 AWG BLUE 1 EOR CHECK Applicable Tooling BCD TABLE 1 ITEM 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 D NUMBER OF CIRCUITS 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 CONNECTOR PART NO. 02KR-6S-P 03KR-6S-P 04KR-6S-P 05KR-6S-P 06KR-6S-P 07KR-6S-P 08KR-6S-P 09KR-6S-P 10KR-6S-P 11KR-6S-P 12KR-6S-P 13KR-6S-P 14KR-6S-P 15KR-6S-P 16KR-6S-P ASSEMBLY PART NUMBER A02KR02KR26E51B A03KR03KR26E51B A04KR04KR26E51B A05KR05KR26E51B A06KR06KR26E51B A07KR07KR26E51B A08KR08KR26E51B A09KR09KR26E51B A10KR10KR26E51B A11KR11KR26E51B A12KR12KR26E51B A13KR13KR26E51B A14KR14KR26E51B A15KR15KR26E51B A16KR16KR26E51B TOTAL WIRE REQUIRED 101.6 mm 152.4 mm 203.2 mm 254 mm 304.8 mm 355.6 mm 406.4 mm 457.2 mm 508 mm 558.8 mm 609.6 mm 660.4 mm 711.2 mm 762 mm 812.8 mm (61.1 +/- 3.0) C C 50.8 +/- 3.0 1 D 1 PIN 1 2.0 PIN 1 2 B B SCALE 1: 1 DIMENSIONS CUSTOMER NAME All dimensions are in MM with a tolerance of +/- 3.0 unless otherwise specified. A DRAWN BY A DESCRIPTION 2.0 mm Pitch KR Standard Catalog Assembly - 2" Overall Len gth – Pin out: 1 to N ASSEMBLY PART NO. STEVEN PILKINGTON REV. DESCRIPTION 4 DATE 3 BY CUSTOMER PART NO. CHECK ED BY SEE TABLE 1 DRAWING NO. & REVISION JUSTIN BAKER 2 REVISED GAM-025 3/4/2016 1