FERROXCUBE DATA SHEET E14/3.5/5 Planar E cores and accessories Supersedes data of September 2004 2008 Sep 01 Ferroxcube Planar E cores and accessories E14/3.5/5 CORES Effective core parameters of a set of E cores SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 1.43 mm −1 Ve effective volume 300 mm 3 Ie effective length 20.7 mm Ae effective area 14.3 mm 2 Amin minimum area 14.3 mm 2 m mass of core half ≈ 0.6 g 14 ± 0.3 handbook, halfpage 11 ± 0.25 3 ± 0.05 2 ± 0.1 3.5 ± 0.1 5 ± 0.1 MBE644 R 0.8 (12x) Dimensions in mm. Fig.1 E14/3.5/5 core. Effective core parameters of an E/PLT combination SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 1.16 mm −1 Ve effective volume 240 mm 3 Ie effective length 16.7 mm Ae effective area 14.5 mm 2 Amin minimum area 14.5 mm 2 m mass of plate ≈ 0.5 g handbook, halfpage 14 ± 0.3 1.5 ± 0.05 Ordering information for plates GRADE TYPE NUMBER 3C90 PLT14/5/1.5-3C90 3C92 PLT14/5/1.5-3C92 3C93 PLT14/5/1.5-3C93 3C94 PLT14/5/1.5-3C94 3C95 PLT14/5/1.5-3C95 3C96 PLT14/5/1.5-3C96 3F3 PLT14/5/1.5-3F3 3F35 PLT14/5/1.5-3F35 3F4 PLT14/5/1.5-3F4 3F45 PLT14/5/1.5-3F45 3E6 PLT14/5/1.5-3E6 2008 Sep 01 5 ± 0.1 R 0.8 MBE652 Dimensions in mm. Fig.2 PLT14/5/1.5. 2 Ferroxcube Planar E cores and accessories E14/3.5/5 Core halves for use in combination with an ungapped E core AL measured in combination with a non-gapped core half, clamping force for AL measurements, 10 ±5 N, using a PCB coil containing 4 layers of 8 tracks each, total height 1.6 mm. GRADE 3C90 AL (nH) µe 63 ±3% ≈ 72 ≈ 530 E14/3.5/5-3C90-A63-E 100 ±5% ≈ 114 ≈ 270 E14/3.5/5-3C90-A100-E E14/3.5/5-3C90-A160-E 160 ±8% AIR GAP (µm) TYPE NUMBER ≈ 182 ≈ 130 1280 ±25% ≈ 1450 ≈0 E14/3.5/5-3C90 3C92 960 ±25% ≈ 1090 ≈0 E14/3.5/5-3C92 3C93 1100 ±25% 3C94 ≈ 1250 ≈0 63 ±3% ≈ 72 ≈ 530 E14/3.5/5-3C94-A63-E 100 ±5% ≈ 114 ≈ 270 E14/3.5/5-3C94-A100-E E14/3.5/5-3C94-A160-E 160 ±8% E14/3.5/5-3C93 ≈ 182 ≈ 130 1280 ±25% ≈ 1450 ≈0 E14/3.5/5-3C94 3C95 1500 ±25% ≈ 1730 ≈0 E14/3.5/5-3C95 3C96 1200 ±25% ≈ 1360 ≈0 E14/3.5/5-3C96 3F3 63 ±3% ≈ 72 ≈ 530 E14/3.5/5-3F3-A63-E 100 ±5% ≈ 114 ≈ 270 E14/3.5/5-3F3-A100-E 160 ±8% ≈ 182 ≈ 130 E14/3.5/5-3F3-A160-E 1100 ±25% ≈ 1250 ≈0 E14/3.5/5-3F3 3F35 900 ±25% ≈ 1020 ≈0 E14/3.5/5-3F35 3F4 63 ±3% ≈ 72 ≈ 530 3F45 3E6 2008 Sep 01 E14/3.5/5-3F4-A63-E 100 ±5% ≈ 114 ≈ 270 E14/3.5/5-3F4-A100-E 160 ±8% ≈ 182 ≈ 130 E14/3.5/5-3F4-A160-E 650 ±25% ≈ 740 ≈0 E14/3.5/5-3F4 ≈ 740 ≈0 E14/3.5/5-3F45 ≈ 6360 ≈0 E14/3.5/5-3E6 650 ±25% 5 600 +40/−30% 3 Ferroxcube Planar E cores and accessories E14/3.5/5 Core halves for use in combination with a plate (PLT) AL measured in combination with a plate (PLT) clamping force for AL measurements, 10 ±5 N, using a PCB coil containing 4 layers of 8 tracks each, total height 1.6 mm. GRADE 3C90 AL (nH) µe 63 ±3% ≈ 58 ≈ 600 E14/3.5/5-3C90-A63-P 100 ±5% ≈ 92 ≈ 300 E14/3.5/5-3C90-A100-P E14/3.5/5-3C90-A160-P 160 ±8% AIR GAP (µm) TYPE NUMBER ≈ 148 ≈ 150 1500 ±25% ≈ 1400 ≈0 E14/3.5/5-3C90 3C92 1130 ±25% ≈ 1040 ≈0 E14/3.5/5-3C92 3C93 1300 ±25% 3C94 ≈ 1200 ≈0 63 ±3% ≈ 58 ≈ 600 E14/3.5/5-3C94-A63-P 100 ±5% ≈ 92 ≈ 300 E14/3.5/5-3C94-A100-P E14/3.5/5-3C94-A160-P E14/3.5/5-3C93 160 ±8% ≈ 148 ≈ 150 1500 ±25% ≈1400 ≈0 E14/3.5/5-3C94 3C95 1740 ±25% ≈ 1600 ≈0 E14/3.5/5-3C95 3C96 1350 ±25% ≈ 1260 ≈0 E14/3.5/5-3C96 3F3 3F35 3F4 63 ±3% ≈ 58 ≈ 600 E14/3.5/5-3F3-A63-P 100 ±5% ≈ 92 ≈ 300 E14/3.5/5-3F3-A100-P 160 ±8% ≈ 148 ≈ 150 E14/3.5/5-3F3-A160-P 1300 ±25% ≈ 1200 ≈0 E14/3.5/5-3F3 1050 ±25% ≈ 980 ≈0 E14/3.5/5-3F35 ≈ 58 ≈ 600 63 ±3% 100 ±5% ≈ 92 ≈ 300 E14/3.5/5-3F4-A100-P 160 ±8% ≈ 148 ≈ 150 E14/3.5/5-3F4-A160-P 780 ±25% ≈ 720 ≈0 ≈ 720 ≈0 E14/3.5/5-3F45 ≈ 5900 ≈0 E14/3.5/5-3E6 3F45 780 ±25% 3E6 6400 +40/−30% 2008 Sep 01 E14/3.5/5-3F4-A63-P 4 E14/3.5/5-3F4 Ferroxcube Planar E cores and accessories E14/3.5/5 Properties of core sets under power conditions B (mT) at GRADE H = 250 A/m; f = 10 kHz; T = 100 °C CORE LOSS (W) at f = 100 kHz; ˆ = 100 mT; B T = 100 °C f = 100 kHz; ˆ = 200 mT; B T = 25 °C f = 100 kHz; ˆ = 200 mT; B T = 100 °C f = 400 kHz; ˆ = 50 mT; B T = 100 °C f = 500 kHz; ˆ = 50 mT; B T = 100 °C E+E14-3C90 ≥320 ≤ 0.030 − − − − E+PLT14-3C90 ≥320 ≤ 0.026 − − − − E+E14-3C92 ≥370 ≤ 0.024 − ≤ 0.16 − − E+PLT14-3C92 ≥370 ≤ 0.021 − ≤ 0.15 − − E+E14-3C93 ≥320 ≤ 0.024(1) − ≤ 0.16 (1) − − E+PLT14-3C93 ≥320 ≤ − ≤ − − 0.021(1) 0.15 (1) E+E14-3C94 ≥320 ≤ 0.024 − ≤ 0.16 − − E+PLT14-3C94 ≥320 ≤ 0.021 − ≤ 0.15 − − E+E14-3C95 ≥320 − ≤ 0.17 ≤ 0.16 − − E+PLT14-3C95 ≥320 − ≤ 0.13 ≤ 0.12 − − E+E14-3C96 ≥340 ≤ 0.019 − ≤ 0.13 ≤ 0.05 ≤ 0.11 E+PLT14-3C96 ≥340 ≤ 0.016 − ≤ 0.12 ≤ 0.045 ≤ 0.09 E+E14-3F3 ≥300 ≤ 0.033 − − ≤ 0.06 − E+PLT14-3F3 ≥300 ≤ 0.027 − − ≤ 0.047 − E+E14-3F35 ≥300 − − − ≤ 0.03 ≤ 0.05 E+PLT14-3F35 ≥300 − − − ≤ 0.024 ≤ 0.035 1. Measured at 140 °C. Properties of core sets under power conditions (continued) B (mT) at CORE LOSS (W) at H = 250 A/m; f = 10 kHz; T = 100 °C f = 500 kHz; ˆ = 100 mT; B T = 100 °C f = 1 MHz; ˆ = 30 mT; B T = 100 °C f = 1 MHz; ˆ = 50 mT; B T = 100 °C f = 3 MHz; ˆ = 10 mT; B T = 100 °C E+E14-3F35 ≥300 ≤ 0.35 − − − E+PLT14-3F35 ≥300 ≤ 0.27 − − − E+E14-3F4 ≥250 − ≤ 0.09 − ≤ 0.15 E+PLT14-3F4 ≥250 − ≤ 0.07 − ≤ 0.12 E+E14-3F45 ≥250 − ≤ 0.07 ≤ 0.26 ≤ 0.12 E+PLT14-3F45 ≥250 − ≤ 0.055 ≤ 0.2 ≤ 0.095 GRADE 2008 Sep 01 5 Ferroxcube Planar E cores and accessories E14/3.5/5 MOUNTING INFORMATION R 0.75 max. 3.2 min. handbook, 4 columns 5.3 min. 10.6 max. CBW549 14.5 min. Fig.3 Recommended PCB cut-out for glued planar E14/3.5/5 cores. 2008 Sep 01 6 Ferroxcube Planar E cores and accessories E14/3.5/5 BLISTER TAPE AND REEL DIMENSIONS K0 handbook, full pagewidth P0 D0 T P2 E F cover tape W B0 MEA613 - 1 A0 D1 P1 direction of unreeling For dimensions see Table 1. Fig.4 Blister tape. Table 1 Physical dimensions of blister tape; see Fig.4 SIZE DIMENSIONS (mm) A0 5.4 ±0.2 B0 14.6 ±0.2 K0 4.0 ±0.2 T 0.3 ±0.05 W 24.0 ±0.3 E 1.75 ±0.1 F 11.5 ±0.1 D0 1.5 +0.1 D1 ≥1.5 P0 4.0 ±0.1 P1 8.0 ±0.1 P2 2.0 ±0.1 2008 Sep 01 7 Ferroxcube Planar E cores and accessories E14/3.5/5 cover film direction of unreeling blister tape MEA639 Fig.5 Construction of blister tape. direction of unreeling leader 552 mm minimum number of empty compartments trailer cover tape only MEA615 Leader: length of leader tape is 552 mm minimum covered with cover tape. Trailer: 160 mm minimum (secured with tape). Storage temperature range for tape: −25 to +45 °C. Fig.6 Leader/trailer tape. 2008 Sep 01 8 Ferroxcube Planar E cores and accessories E14/3.5/5 W2 handbook, full pagewidth 20.5 12.75 0.15 N 0 A MSA284 W1 Dimensions in mm. For dimensions see Table 2. Fig.7 Reel. Table 2 Reel dimensions; see Fig.7 DIMENSIONS (mm) SIZE 24 2008 Sep 01 A N W1 W2 330 100 ±5 24.4 ≤28.4 9 Ferroxcube Planar E cores and accessories E14/3.5/5 DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS PRODUCT STATUS DEFINITIONS Preliminary specification Development This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS INDICATION DEFINITION Prototype These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. Design-in These products are recommended for new designs. Preferred These products are recommended for use in current designs and are available via our sales channels. Support These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability. 2008 Sep 01 10