ES1AUL THRU ES1JUL SINGLE PHASE 1.0AMP SURFACE MOUNT SUPER FAST RECOVERY RECTIFIER Features · Glass passivated device · Ideal for surface mouted applications · Low reverse leakage SOD-123FL 8°(8°) 2°(2°) 0.079(2.0) 0.008(0.2) 0.004(0.1) 0.063(1.6) 0.043(1.1) 0.035(0.9) · Metallurgically bonded construction · High temperature soldering guaranteed: 260℃ /10 seconds,0.375"(9.5mm) lead length, 5 lbs. (2.3kg) tension · Plastic material-UL flammability 94V-0 0.111(2.8) 0.095(2.4) 0.150(3.8) 0.134(3.4) 0.150(3.8) 0.134(3.4) 0.047(1.2) 0.032(0.8) 0.063(1.6) 0.079(2.0) Mechanical Data · Case: SOD-123FL, molded plastic · Terminals: plated leads solderable per 0.047(1.2) 0.032(0.8) MIL-STD-750, Method 2026 · Polarity: Color band denotes cathode end · Mounting position: Any 0.037(0.95) 0.022(0.55) Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ ambient temperature unless otherwise specified. Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL ES1AUL ES1BUL EAU EBU Code TYPE NUMBER ES1DUL ES1GUL ES1JUL EDU EGU EJU UNITS VRRM Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRWM RMS Reverse Voltage VRMS 50 100 200 400 600 V 35 70 140 280 420 V VDC @TA =30℃ IO 1.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 35 A Forward Voltage per element VFM Average Rectified Output Current @IF=1.0A 0.95 1.25 1.7 V Peak Reverse Current @TA =25℃ At Rated DC Blocking Voltage @TA =100 ℃ IR 5.0 100 uA Maximum reverse recovery time (NOTE 1) trr 35 ns Typical junction capacitance (NOTE 2) CJ 10 pF RθJA 85 ℃/W TJ,TSTG -55to+150 ℃ Typical thermal resistance (NOTE 3) Operating and Storage Temperature Range Note:1. Measured with IF=0.5A, IR=1A, Irr=0.25A. 2. Thermal resistance from junction to ambient at 0.375" (9.5mm)lead length,P.C.B. mounted 3. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. version:01 1 of 2 www.dyelec.com ES1AUL THRU ES1JUL 0.8 0.6 Single Phase Half Wave 60Hz Resistive or inductive Load 0.4 0.2 0 0 25 50 75 100 125 TA AMBIENT TEMPERATURE 150 175 ( oC) FIG. 3-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 45 37.5 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 30 22.5 version:01 15 7.5 0 1 10 100 NUMBER OF CYCLES AT 60 Hz IF INSTANTANEOUS FORWARD CURRENT,(A) 1.0 FIG. 2-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 20 10 TA=25 C PULSE WIDTH=300 µs 1%DUTY CYCLE 1 0.1 ES1AUL-ES1DUL ES1GUL ES1JUL 0.01 0 0.4 0.8 1.2 1.6 1.8 V F , INSTANTANEOUSFORWARD VOLTAGE (V) FIG. 4-TYPICAL REVERSE CHARACTERISTICS I R INSTANTANEOUS REVERSE CURRENT (uA) I FSMPEAK FORWARD SURGE CURRENT (A) I (AV)AVERAGE FORWARD CURRENT (A) FIG. 1- FORWARD CURRENT DERATING CURVE 1,000 100 10 TA=100 C 1 0.1 TA=25 C 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLYAGE(%) 2 of 2 www.dyelec.com