ZETTLER AZ2150-1A-5DE Miniature power relay Datasheet

AZ2150
MINIATURE
POWER RELAY
FEATURES
• 30 Amp switching capability for both N.O. and
N.C. contacts
• 1 Form A, B and C contacts available
• DC coils to 120 VDC
• Life expectancy to 10 million operations
• Class B insulation standard
• Class F (155°C) version available
• Available with an epoxy seal for automatic wave
soldering and immersion cleaning
• Proof Tracking Index (PTI/CTI) 175
• UL, CUR file E44211 including versions meeting
UL 508 and UL 873 spacing and contact rating
requirements; VDE 132710 ÜG (some models)
CONTACTS
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 30 A 120 VAC Res. (N.O.)
Operate Time (max.)
Max. 12 ms
Typical: 8 ms
Release Time (max.)
Max. 5 ms
Typical: 3.5 ms
Dielectric Strength
2500 Vrms contact to coil
(at sea level for 1 min.) 1500 Vrms between open contacts
Arrangement
SPDT (1 Form C)
SPST (1 Form A and 1 Form B)
Ratings
Resistive load:
Insulation Resistance
1000 megohms min. at 500 VDC, 20°C
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Storage
At nominal coil voltage
-55°C (-67°F) to 85°C (185°F)
-55°C (-67°F) to 105°C (221°F)
Vibration
0.062" (1.5 mm) DA at 10–55 Hz
Shock
20 g
VDE Rating:
AZ2150-1A - 25 A at 250 VAC, 1 x 104, resistive
AZ2150-1C - 20 A at 250 VAC, 1 x 104, resistive
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy
Material
Silver cadmium oxide
Max. Solder Temp.
270°C (518°F)
Resistance
< 20 milliohms initially
(at rated current, voltage drop method)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
25 grams
Max. switched power: 900 W or 7200 VA
Max. switched current: 30 A
Max. switched voltage: 30 VDC or 300 VAC
UL Rating: See chart for UL contact ratings.
AZ2150 Series meets UL 508 Group A spacing
and UL 873 refrigeration and safety control
requirements. AZ2151 Series meets UL 508
Group B spacing requirements.
COIL
Power
At Pickup Voltage
(typical)
500 mW
Max. Continuous
Dissipation
2.2 W at 20°C (68°F) ambient
1.8 W at 40°C (104°F) ambient
Temperature Rise
43°C (77°F) at nominal coil voltage
Temperature
Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
ZETTLER
NOTES
1.
2.
3.
4.
All values at 20°C (68°F).
Relay may pull in with less than “Must Operate” value.
Unsealed relays should not be dip cleaned.
Other coil resistances and sensitivities available upon request.
Please call the factory.
5. Specifications subject to change without notice.
electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
[email protected]
www.ZETTLERelectronics.com
2003-03-12
AZ2150
Maximum Switching Capacity
RELAY ORDERING DATA
STANDARD RELAYS: 1 Form A (SPST); 508 Group A; UL 873 Version
COIL SPECIFICATIONS
ORDER NUMBER*
Max.
Continuous
VDC
5
6
9
12
15
18
24
48
70
110
7.3
8.9
13.9
17.5
22.5
27.4
36.1
68.4
104.4
163.2
Coil
Resistance
±10%
27
40
97
155
256
380
660
2,560
5,500
13,450
Must
Operate
VDC
3.75
4.5
6.75
9.0
11.25
13.5
18.0
36.0
52.5
82.5
Unsealed
20
Sealed
AZ2150–1A–5D
AZ2150–1A–6D
AZ2150–1A–9D
AZ2150–1A–12D
AZ2150–1A–15D
AZ2150–1A–18D
AZ2150–1A–24D
AZ2150–1A–48D
AZ2150–1A–70D
AZ2150–1A–110D
AZ2150–1A–5DE
AZ2150–1A–6DE
AZ2150–1A–9DE
AZ2150–1A–12DE
AZ2150–1A–15DE
AZ2150–1A–18DE
AZ2150–1A–24DE
AZ2150–1A–48DE
AZ2150–1A–70DE
AZ2150–1A–110DE
10
8
AMPERES
Nominal
Coil
VDC
30
AC RESISTIVE
LOAD
6
5
4
DC RESISTIVE
LOAD
3
2
1
10
20
30
40
STANDARD RELAYS: 1 Form A (SPST); UL 508 Group B Version
COIL SPECIFICATIONS
ORDER NUMBER*
7.3
8.9
13.9
17.5
22.5
27.4
36.1
68.4
104.4
163.2
27
40
97
155
256
380
660
2,560
5,500
13,450
3.75
4.5
6.75
9.0
11.25
13.5
18.0
36.0
52.5
82.5
AZ2151–1A–5D
AZ2151–1A–6D
AZ2151–1A–9D
AZ2151–1A–12D
AZ2151–1A–15D
AZ2151–1A–18D
AZ2151–1A–24D
AZ2151–1A–48D
AZ2151–1A–70D
AZ2151–1A–110D
80 100
200
300
AZ2151–1A–5DE
Coil Temperature Rise
AZ2151–1A–6DE
180
AZ2151–1A–9DE
160
AZ2151–1A–12DE
140
AZ2151–1A–15DE
120
AZ2151–1A–18DE
100
AZ2151–1A–24DE
80
30A
AZ2151–1A–48DE
60 25A
AZ2151–1A–70DE
40 20A
15A
AZ2151–1A–110DE
20 0A
Coil Temperature Rise ˚C
5
6
9
12
15
18
24
48
70
110
60
VOLTAGE
* Substitute “1B” or “1C” in place of the “1A” to indicate 1 Form B and 1 Form C respectively.To indicate Class F
version, add suffix “F”.
0
40%
60%
80%
100%
120%
140%
160%
180%
200%
Percent of Nominal Coil Voltage (at 20˚C)
MECHANICAL DATA
UL/CUR File E44211 Approved Contact Ratings
Load Type
Cycles
Volts
Form A
(NO)
General Purpose
(Inductive)
Resistive
100,000
30,000
100,000
100,000
100,000
100,000
6,000
30,000
30,000
100,000
6,000
125 or 240 VAC
277 VAC
125 or 240 VAC
30 VDC
277 VAC
240 VAC
277 VAC
125 VAC
240 VAC
125 or 277 VAC
125 VAC
30 A
30 A
30 A
20 A
20 A
15 A
6A
800 VA
690 VA
690 VA
1 HP
15 A
30 A
15 A
10 A
—
—
3A
275 VA
275 VA
—
1/ HP
4
—
30 A
—
20 A
—
—
6A
470 VA
470 VA
690 VA
1 HP
15 A
30 A
—
10 A
—
—
3A
275 VA
275 VA
—
1/ HP
4
6,000
30,000
100,000
240 VAC
125 VAC
125 or 277 VAC
2 HP
1 HP
3/ HP
4
1 HP
—
—
2 HP
1 HP
3/ HP
4
1 HP
—
—
30,000
125 VAC
100,000
125 VAC
Ballast
Pilot Duty
Motor Load
Definite Purpose
(LRA-Locked Rotor)
(FLA-Full Load)
30,000
100,000
Tungsten
240 VAC
277 VAC
6,000
125 VAC
6,000
240 VAC
6,000
120 VAC
6,000
240 VAC
TV–5
25,000
120 VAC
TV–3
25,000
120 VAC
Note: See AZ2100 Data Sheet for more complete
ZETTLER
Form B
(NC)
Form C
NO
NC
96 LRA
33 LRA
60 LRA
30 FLA
10 FLA
20 FLA
82.8 LRA
—
82.8 LRA
27 FLA
—
27 FLA
80 LRA
33 LRA
60 LRA
30 FLA
10 FLA
20 FLA
60 LRA
—
60 LRA
20 FLA
—
20 FLA
15 A
—
15 A
5A
—
5A
—
3A
—
—
3A
—
TV–5
—
TV–5
—
TV–3
—
UL and CUR approved contact ratings.
33 LRA
10 FLA
—
—
33 LRA
10 FLA
—
—
3A
3A
—
—
TV–3
TV–3
.020
.130 +– .010
0.51)
(3.3 +– 0.25
.500
(12.7)
.690
(17.5)
1.25
(31.80)
.090
(2.3)
.200
(5.1)
.110
(2.8)
.045 x .045
(1.14 x 1.14)
.751
(19.1)
.196
(5.0)
1.06
(26.9)
PC BOARD LAYOUT
.032 x .062
(0.81 x 1.57)
WIRING DIAGRAM
Viewed toward
terminals
.400 .300
(10.2) (7.6)
.025 x .025
(0.63 x 0.63)
Viewed toward
terminals
.081 x .003
(2.06 x .076)
DIA (4 PLACES)
1.00
(25.38)
.900
(22.86)
.043 x .003
(1.09 x .076)
AZ2150 VERSION
1 FORM A
(SPST-NO)
1 FORM B
(SPST-NC)
1 FORM C
(SPDT)
AZ2151 VERSION
Terminal
Eliminated
on AZ2150
Versions
.150 (3.8)
.350 (8.9)
.550 (14.0)
.700
(17.8)
1 FORM A
(SPST-NO)
1 FORM B
(SPST-NC)
1 FORM C
(SPDT)
Dimensions in inches with metric equivalents in parentheses.
Tolerance: ± .010"
electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
[email protected]
www.ZETTLERelectronics.com
2003-03-12
Similar pages