medical medical HPU101 series 100W 100W External Medical Grade Power Supply The HPU101 series of AC/DC switching mode power supplies provide 100 Watts of continuous output power . All supplies are UL94V-1 min compliant. All models meet FCC Part-18 class B and EN55011 and are to n s M e d i c aCISPR-11 l Adapt ers class f or BHemission ealt hLimits C are Apdesigned p lica tio comply with ANSI/AAMI ES 60601-1: 2005(UL/cUL 3rd Edition), EN 60601-1:2006 (TUV/T-mark 3rd Edition) and new CE requirements. All units are 100% burned in and tested. FEATURES: HPU101 series AHP101 * Wide Operating Voltage, 90 to 260 VAC, 47 to 63 Hz The HPU101 * IEC-320-C14 Inputseries Inlet of AC/DC switching mode power supplies with PFC provide * Single Output100 Watts of continuous output power . All supplies are min Over compliant. All models meet FCC Part-18 class B and * OverUL94V-1 Voltage and Load protection CISPR-11 class B emission Limits and are designed to * Medical SafetyEN55011 3rd (IEC60601-1 3rd Edition) comply with ANSI/AAMI ES 60601-1: 2005(UL/cUL 3rd Edition), EN to OutputInput : 2MOPP Wide* Input 90-260VAC 60601-1:2006 (TUV/T-mark RoHS2 * Energy Star 2.0, Efficiency level V3rd Edition) and new CE requirements. units are 100% burned in and tested. 2011/65/EU * ClassAll I system series Medical Safety IEC60601-1 3rd Edition; 2MOPP * 3 year warranty medical RoHS2 2011/65/EU Class I, 3 Prong Mains Input IEC320-C14 APPLICATIONS: FE *W *I *S *O *M *I *E *C *3 Home Healthcare Equipment Over** Voltage and Over Load Protection 63 AP Patient Monitor * Blood Pressure system *H HPU63B series of AC/DC switching mode power supplies FEATU Efficiency Level V devices *The Portable medical *P 63 Watts of continuous output power . All supplies are *provide ECG machine * BO * Wide UL94V-1 min compliant. All models meet FCC Part-18 class B and *P Power Factor Correction * IEC-32 GENERAL SPECIFICATION: CISPR-11 EN55011 class B emission Limits and are designed to *E * Single with ANSI/AAMI 60601-1: 2005(UL/cUL 3rd Edition), EN *comply : Auto Recovery Short Circuit ProtectionES * Over V 3rd Edition) and new CE requirements. GE *60601-1:2006 Air Convection Cooling: Free (TUV/T-mark * Medic units are 100% burned in and tested. APPROVALS: *All : UL94V-1 Flammability Rating * St * Input * Protection Classes: Class I *C RoHS2 * Energy EN 60601-1 P 60601-1:2006 * Safety: ANSI/AAMI ES 60601-1:2005(UL/cUL 3rd Edition), EN 2011/65/EU * FII * Class (TUV/T-mark 3rd Edition) *P * 3 year HPU63B series APPROVALS: CB 2.99”W x 5.75”L x1.69”H EN 60601-1 IEC 60601-1 PS E S&E CB Electrical Characteristics: Symbol Model Number AHP1011-05 AHP1011-06 AHP1011-07 AHP1011-08 AHP1011-09 AHP1011-10 AHP1011-11 Characteristic Vins Safety Approval Input Voltage Range Vin Input Operate Voltage Range Detail to see Fig.1 Fi PF Po Iil Iih Irl Irh Ik Input Frequency 8.33 12VDC Power Factor Correction 15VDC 6.66 Output Power Range 18VDC 5.55 Low Line Input Current 24VDC 4.16 High Line Input Current 30VDC 3.33 Low Line Input Inrush Current 36VDC 2.77 High Line Input Inrush Current 48VDC 2.08 Current Safety Ground Leakage Efficiency △Voi Line Regulation OVP Over Voltage Protection OLP Over Load Protection ttr Time of Transient Response thu Hold-Up Time ts Start-up time Ris Insulation Resistance Tc Temperature Coefficient HV Dielectric Withstanding Voltage (P-S) Vpg Dielectric Withstanding Voltage (P-G) EMI EMC Emission Environmental: Symbol Characteristic To Operating Temperature Ts Storage Temperature Ho Operating Humidity Hs Storage Humidity Vsg Surge Voltage Electro Static Discharge ESDa ESDc Electro Static Discharge WWW.ASTRODYNETDI.COM MTBF Mean Time Between Failure ELEV Operating Altitude (Elevation) VBR Vibration Min. Condition Electrical Characteristics: Safety Approval & Specification in Label Output Voltage Output Amps S E IEC 60601-1 Efficiency Sine wave 81% Total Symbol Regulation Vins Output Connector Characteristic 100 Safety Approval Input Voltage Range ±5% 5 Pin DIN Input Operate Voltage Range Vin 84% ±4% 5 Pin DIN Input Frequency Fi See Rating Chart 87% ±4% 5 Pin DIN Power Factor Correction PF Full Load, Vin=100VAC 87% ±4% Po Coax Output Power Range Full Load, Vin=240VAC 87% ±3% Iil Coax Low Line Input Current Full Load, 25°C, Cool start,APPROVALS: Vin=100VAC 87% ±3% Iih CoaxCurrent High Line Input Full Load, 25°C, Cool start, Vin=240VAC 87% ±3% Coax Low Line Input Inrush Current Irl Vin=240VAC, Fi=60Hz CB EN 60601-1 IEC 60601-1 High Chart Line Input Inrush Current Full Load, Vin=230VAC, Detail Irh to see Rating Safety Ground Leakage Current Full Load, Vin=100~120VAC or Ik 200~240VAC Electrical Characteristics: Efficiency PS E S&E *S Typ. Max. Unit (TU 240 VAC APPLIC 90 260 Home VAC Safety Approval & *Specifica 47 63 * Patien Hz Detail to see Fig.1 0.95 1 * Blood * Portab Sine wave 100 W * ECG m 1.2 A See Rating Chart GENER 0.5 A Full Load, Vin=100VAC 50 * Short A C * Coolin Full Load, Vin=240VAC 120 A * Flamm Full Load, 25°C, Cool start, 0.25* Protec mA Full Load, 25°C, Cool start, * Safety See Rating Chart Vin=240VAC, Fi=60Hz % 0.5 1 (TUV/T-m Full Load, Vin=230VAC, Det 112 132 % Characteristic Line Regulation Full Load, Vin=100~120VAC Recovers automatically after condition is removed % i 150 Approval Input Voltage Range Safety110 Approval & Specification VinsfaultSafety Over Voltage Protection ms Full Load, Vin=110VAC Vin OVP 4 linearly Input Operate Voltage Range Detail to see Fig.1 (Derate Recovers automaticallyms aft OLP Over Load Protection Full Load, Vin=100VAC Fi 16 Input Frequency Sine wave Time of Transient Response Full Load, Vin=110VAC ttr s Full Load, Vin=100~240VAC 0.3 Chart 2 Output Power Range See Rating Po Hold-Up Time Full Load, Vin=100VAC thu Primary to Secondary, 500VDC,25°XC/ 70% RH 50 Vin=100VAC MΩ Low Line Input Current Full Load, Iil Start-up time Full Load, Vin=100~240VAC ts %/°C ±0.04 All Condition High Line Input Current Full Load, Vin=240VAC Iih Primary to Secondary, 500V Ris <10mA Insulation Resistance Primary to Secondary, limit VAC Low Line Input Inrush Current Full Load, 25°C, Cool4000 start, Vin=1 Irl current Temperature Coefficient Tc All Condition 1500 VAC Primary to PE, limit current <10mA High Line Input Inrush Current Full Load, 25°C, Cool start, Vin=2 Irh Dielectric Withstanding Voltage (P-S) Primary to Secondary, limit HV EN61000-3-2,-3 Compliance to EN55011 (CISPR11), B Vin=230VAC, Detail Class Full Load, to Efficiency Dielectric Withstanding Voltage (P-G) Primary to PE, limit current Vpg Line Regulation Full Load, Vin=100~120VAC or 20 △Voi Compliance to EN55011 (C EMC Emission EMI Over Voltage Protection OVP Min. Typ. Max. Unit Condition Symbol △Voi Environmental: Over Load Protection Detail to see Fig.2 (DerateOLP linearly from 100% load at 40°C to 50% load at 70°C) Symbol Characteristic Time of Transient Response ttr 10 ~ 95% RH Operating Temperature To Hold-Up Time thu non-condensing Storage time Temperature Ts Start-up ts See Rating Chart Recovers fau -10 automatically 70after°C Full Load, Vin=110VAC -40 85 °C Detail to see Fig.2 (Derate lin Full Load, 0 Vin=100VAC 95% RH 100 ~ Vin=100~240VAC 95% RH 95% RH Full Load, Operating Humidity non-condensing Coefficient Tc Ho Temperature All Condition kV 2 All Condition Storage Humidity SeetoRating Chart limit curre Primary Secondary, Dielectric Withstanding Voltage (P-S) Hs HV Air Discharge, IEC61000-4-2 8 kV Compliance to EN55011 (CISPR1 Surge Voltage EMI VsgEMC Emission ASTRODYNE USA: 1-800-823-8082 All Condition Contact Discharge, IEC61000-4-2 6 kV Electro Discharge PACIFIC: 886-2-26983458 Air Discharge, IEC61000-4ASTRODYNE ESDa Operating Temperature at 25°C, Calculated per Static MIL-HDBK-217F 100k h Contact Discharge, IEC6100 ESDc Electro Static Discharge 3000 m All condition Environmental: Operating Temperature at MTBF Time Failure 10 ~ 500Hz, 10min./1cycle, 60min. eachMean along X, Y, ZBetween axes 5 G Symbol Characteristic ELEV Operating Altitude (Elevation) All condition 100W M e d i c a l Adapt ers f or H ealt h C are Ap p lica tio n s with PFC 90-260 VAC (100-240 Nominal) 47-63 Hz Low Line (100VAC) 1.2A max. High Line (240VAC) 0.5A max. 0.5W Low Line (100VAC) 50A max. High Line (240VAC) 120A max. 0.25mA max. 0.95 min. Class I OUTPUT SPECIFICATIONS Voltage and Current Output Power Range Load Regulation (Note 2) Line Regulation (Note 1) Over Load Protection* Over Voltage Protection* Short Circuit Protection Transient Response Temperature Coefficient Ripple/Noise (Note 3) Start Up / Hold Up Time See Selection Chart 0 to FL Rating, 100W max. ± 5%, max. (0-FL, 230Vin) ± 1%, max., FL 110-150%, Auto Recovery 112-132% Auto Recovery 110Vin, FL to 1/2L 4mS ±0.04%/°C, typ 100mV p-p 100Vin, FL 2S max. / 16mS min. Size Construction Weight Output Connector Flammability Rating 5.75” x 2.99” x 1.69” (146 x 76 x 43mm) Desktop Style 23.63oz (670g) See Selection Chart UL94V-1 ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Cooling Storage Temperature Operating/Storage Humidity EMC MTBF (MIL-HDBK-217F) Surge Voltage ESD - Air ESD - Contact Operating Altitude (Elevation) Vibration -10 to +40°C (FL) * 50% Load @ 70°C (See Derate Curve Last Page) Free Air Convection -40 to +85°C, 10~95% RH * 0% to 95%, non-cond * Compliance to EN55011 (CISPR11), EN61000-3-2, -3 Class B 100,000 Hrs 2kV IEC61000-4-2, 8kV IEC61000-4-2, 6kV 3000m 5G, 10 ~ 500Hz, 10min./1cycle, 60min. each along X, Y, Z axes NOTES GENERAL SPECIFICATIONS Input-Out Isolation Input-GND Isolation Isolation Resistance Efficiency (FL, Nom. Vin) Safety series PHYSICAL SPECIFICATIONS INPUT SPECIFICATIONS Input Voltage Range Frequency Range (Sine Wave) Input Current No Load Power Consumption Inrush Current, typ (Cold Start) Leakage Current (240Vin, 60hHz) Power Factor Correction Protection Class AHP101 4000 VAC 1500 VAC 50MΩ, 500VDC,25°XC/ 70% RH See Selection Chart ANSI/AAMI ES 60601-1:2005 (UL/cUL 3rd Edition), EN 60601-1:2006 (TUV/T-mark 3rd Edition) All specifications are typical at nominal input, full load, and 25°C unless otherwise noted WWW.ASTRODYNETDI.COM 1. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. 2. Load regulation is defined by changing ±40% of measured output load from 60% rated load. 3. Ripple & noise is measured by using 20MHz bandwidth limited oscilloscope and terminated each output with a 0.47uF capacitor at rated load and nominal line. * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 oscilloscope and terminated each output with a 0.47uF capacitor at rated load and nominal line. 6. Hold up time is measured from the end of the last charging pulse to the time which the main output drops down to low limit of main output at rated load and nominal line. 7. Efficiency is measured at rated load, and nominal line. 8. The specifics for testing the energy efficiency of this Series are outlined in a separate document titled "Test Method for Calculating the Energy Efficiency of Single-Voltage Interchangeable AC-DC and AC-AC Power Supplies (August 11, 2004)," which is available on the ENERGY STAR Website. 50 80 100 120 140 160 180 200 220 INPUT VOLTAGE (VAC) (FIG.1) INPUT VOLTAGE DERATING CURVE 240 260 280 110 100 90 80 70 60 AHP101 50 40 100W M e d i c a l Adapt ers f or H ealt h C are Ap p lica tio n s with PFC 30 20 series 10 MECHANICAL DIMENSIONS 0 -10 20 30 40 0 10 DC OUTPUT CONNECTIONS TEMPERATURE (°C) Coaxial Plug Dimensions are in mm (inches) MECHANICAL DIMENSIONS: ( UNIT: mm ) 50 60 70 80 (FIG.2) TEMPERATURE DERATING CURVE OUTPUT CABLE RECOMMEND : 5.5mmoutput outer diameter 1. Selected connectors and wire, please refer to Appendix. -Vout +Vout 2.1mm diameter,tofemale 2. This seriesinner is required use AWG#18x3C+ AWG#16x3C/4FT output cable. 11mm length, center “+” 3. The regulation and efficiency will be changed by modified output cable. PACKING : 1. Net weight: 490~670g approx. 1. COM 2. Optional output connectors available contact 2. COMsales for details. 5 Pin DIN 1 3. Vout 4. COM 5. Vout Shell = GND 3 4 2 5 Output Cord Length is 48” and uses AWG#18x3C + AWG#16x3C Cables Modify the Output Cord will effect Regulation and Efficiency Rating Chart: Typ. Efficiency No Load Consumption Hold-Up Time (%) (%) (W) (ms) 100 ±5 81 0.5 16 OLP 100 ±4 84 0.5 16 OLP 100 100 ±4 87 0.5 16 OLP 4.76 100 100 ±4 87 0.5 16 OLP 3.70 280 100 100 ±3 87 0.5 16 OLP 100 ±3 87 0.5 16 OLP 100 ±3 87 0.5 16 OLP (VDC) (VDC) (A) (A) (W) 80 HPU101-105 11.0 13.0 7.69 9.09 100 HPU101-106 70 13.0 16.0 6.25 7.69 100 HPU101-107 16.0 21.0 4.76 6.25 21.0 27.0 3.70 33.0 180 3.03 220 40.0 2.50 3.03 100 48.0 2.08 2.50 100 Voltage Range 110 (Based on the output volt.) MODEL NO. 100 LOAD (%) 90 60 HPU101-108 50 HPU101-109 80 100 min max min max 27.0 140 120 HPU101-110 33.0 110 HPU101-111 40.0 100 160 200 INPUT VOLTAGE (VAC) (FIG.1) INPUT VOLTAGE DERATING CURVE 240 260 Protection Mode Total Regulation (mVp-p) Maximum Output Power Ripple & Noise DERATE CURVESMedical Grade PowerOutput 100W External Supply Current 90 80 70 60 50 40 30 20 10 0 -10 0 10 20 30 40 50 TEMPERATURE (°C) (FIG.2) TEMPERATURE DERATING CURVE 60 70 80 OUTPUT CABLE RECOMMEND : 1. Selected output connectors and wire, please refer to Appendix. 2. This series is required to use AWG#18x3C+ AWG#16x3C/4FT output cable. 3. The regulation and efficiency will be changed by modified output cable. PACKING : 1. Net weight: 490~670g approx. 2. Optional output connectors available contact sales for details. WWW.ASTRODYNETDI.COM 0315 ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458