NPC APSF160ESS271MH08S Conductive polymer aluminum solid capacitor Datasheet

CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
Radial Lead
Upgrade!
@Super low ESR, high ripple current capability
@ESR 5mO max. (2 & 2.5Vdc)
@Longer life (5,000 hours at 105C)
@ESR after endurance is specified within the initial spec (2 & 2.5Vdc)
@Rated voltage range : 2 to 16Vdc
@RoHS Compliant
@Halogen Free
PSF
Lower ESR
PSE
?SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Surge Voltage
Leakage Current
-55 to +105C
*Note
2 to 16Vdc
P20% (M)
Rated voltage(V)B1.15
I=0.2CV or 500MA, whichever is greater
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
Dissipation Factor
(tane)
0.10 max.
Low Temperature
Characteristics
(Max.Impedance Ratio)
Z(-25C)/Z(+20C)[1.15
Z(-55C)/Z(+20C)[1.25
Endurance
Bias Humidity Test
Surge Voltage Test
Failure Rate
(at 20C, 120Hz)
(at 105C)
(at 20C after 2 minutes)
(at 20C, 120Hz)
(at 100kHz)
The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 5,000 hours
at 105C.
Appearance
No significant damage
Capacitance change
[P20% of the initial value
D.F. (tanE)
[The initial specified value
ESR
2 & 2.5Vdc : [The initial specified value
16Vdc
: [150% of the initial specified value
Leakage current
[The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to DC voltage at 60C,
90 to 95% RH for 1,000 hours.
Appearance
No significant damage
Capacitance change
[P20% of the initial value
D.F. (tanE)
[The initial specified value
ESR
2 & 2.5Vdc : [The initial specified value
16Vdc
: [150% of the initial specified value
Leakage current
[The initial specified value
The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105C for 30 seconds
through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds.
Appearance
No significant damage
Capacitance change
[P20% of the initial value
D.F. (tanE)
[The initial specified value
ESR
2 & 2.5Vdc : [The initial specified value
16Vdc
: [150% of the initial specified value
Leakage current
[The initial specified value
0.5% per 1,000 hours maximum (Confidence level 60% at 105C)
*Note : If any doubt arises, measure the leakage current after the following voltage treatment.
Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105C.
?DIMENSIONS [mm]
Coated Case
Size code F05
F08
fD
6.3
fd
0.45
0.6
F
2.5
fD'
L'
L+1.0max.
FD'
Fd
F05, F08, H08
FP0.5
@Terminal Code : E
(F05, F08, H08)
FP0.5
Coated Case
FD'
(FA5)
L'
15min.
H08
HB5
8.0
JB5
10.0
0.6
0.5
3.5
FD+0.5max.
L+0.3max. L+1.0max.
5.0
L+1.5max.
4min.
Fd
FA5, HB5, JB5
15min.
FP0.5
L'
FA5
(HB5, JB5)
?MARKING
EX) 2.5V560MF
F 6D6
560
2.5V
4min.
(1/2)
CAT. No. E1001K
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
Radial Lead
Upgrade!
?PART NUMBERING SYSTEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
A PS F 2 R 5 E AA 5 6 1 M F 0 8 S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 560MF:561)
Lead forming·Taping code
Terminal code
Voltage code (ex. 2.5V:2R5, 16V:160)
Series code
Category
Please refer to "Product code guide (conductive polymer type)"
?STANDARD RATINGS
WV(Vdc)
Cap(mF)
2
1,000
330
470
560
820
1,600
100
100
270
270
330
470
470
2.5
16
Case size
fDbL(mm)
ESR
(mo max./20c, 100k to 300kHz)
6.3B8
6.3B8
6.3B8
6.3B8
6.3B8
8B8
6.3B5
6.3B10.5
8B8
8B11.5
8B8
8B11.5
10B11.5
5
5
5
5
5
5
24
25
10
11
13
11
10
Rated ripple current
(mArms/105c, 100kHz)
5,900
5,900
5,900
5,900
5,900
6,100
2,490
2,820
5,000
5,080
4,700
5,400
6,100
Part No.
APSF2R0ESS102MF08S
APSF2R5ESS331MF08S
APSF2R5ESS471MF08S
APSF2R5ESS561MF08S
APSF2R5ESS821MF08S
APSF2R5ESS162MH08S
APSF160ESS101MF05S
APSF160ESS101MFA5S
APSF160ESS271MH08S
APSF160ESS271MHB5S
APSF160ESS331MH08S
APSF160ESS471MHB5S
APSF160ESS471MJB5S
SS : Enter the appropriate lead forming or taping code.
(2/2)
CAT. No. E1001K
Similar pages