EPCOS B63399-B5 In accordance with iec 60133 Datasheet

P 11 × 7
Core
B65531
6,95 _ 0,45
11,3 _ 0,4
Magnetic characteristics (per set)
with
without
center hole center hole
mm–1
mm
mm2
mm2
mm3
ø2+0,1
s
0,92
16,30
17,70
14,90
289,00
4,4+0,3
1,0
15,9
15,9
—
252,0
6,6 _ 0,2
Σl/A
le
Ae
A min
Ve
9+0,4
2,3+0,4
■ In accordance with IEC 60133
■ Pot cores are supplied in sets
ø4,7 _ 0,2
Approx. weight (per set)
FPK0069-T
m
1,7
1,8
g
Gapped
Material
AL value
nH
µe
s
approx.
mm
Ordering code 1)
-D with center hole
-T with threaded sleeve
K1
25 ± 3 %
40 ± 3 %
1,00
0,41
20
32
B65531-D25-A1
B65531-D40-A1
M33
40 ± 3 %
63 ± 3 %
0,64
0,38
32
50
B65531-D40-A33
B65531-D63-A33
N48
100 ± 3 %
160 ± 3 %
250 ± 3 %
400 ± 5 %
0,20
0,10
0,06
0,03
80
127
199
318
B65531-D100-A48
B65531-+160-A48
B65531-+250-A48
B65531-D400-J48
AL value
µe
Ungapped
Material
nH
nH
M33
780 + 30/– 20 %
A L1min P V
W/set
620
Ordering code
-D with center hole
-W w/o center hole
B65531-D-R33
N26
1800 + 30/– 20 % 1430
B65531-D-R26
N30
3500 + 30/– 20 % 2560
B65531-W-R30
T38
7000 + 40/– 30 % 5120
N87
2000 + 30/– 20 % 1460 1250
B65531-W-Y38
< 0,12
B65531-W-R87
(200 mT, 100 kHz, 100 °C)
1) Replace the + by the code letter ”D“ or ”T“ for the required version.
324 08/01
P 11 × 7
Accessories
B65532
Coil former
Standard:
Material:
Winding:
to IEC 60133
GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085:
F max. operating temperature 155 °C), color code black
see “Processing Notes”, page 155
Insulating washer 1 between core and coil former
■ For tolerance compensation and for insulation
■ Polycarbonate spring washer (UL 94 V-0, insulation class to IEC 60085: E
Coil former
120°C), 0,04 mm thick
Ordering code
Sections
AN
mm2
lN
mm
A R value
µΩ
1
4,2
22
180
Insulating washer 1 (reel packing, PU = 1 reel)
B65532-A5000
Coil former
ø4,8+0,1
ø5,7 _ 0,1
AN
1,8+0,4
8,9 _ 0,2
B65532-B-T1
0,4
4,2 _ 0,1
FPK0266-G
Insulating washer 1
325 08/01
P 11 × 7
Accessories
B65535
Mounting assembly for printed circuit boards
■ The set comprises a terminal carrier and a yoke
■ For snap-in connection
Terminal carrier
■ With thread for the adjusting screw (to be combined with core version ”D“)
Material:
GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085:
F max. operating temperature 155 °C), color code black
Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s
Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s
Yoke
Spring yoke, made of tinned nickel silver (0,25 mm), with ground terminal
Complete mounting assembly
(4 solder terminals)
Ordering code: B65535-B2
Complete mounting assembly
(8 solder terminals)
Ordering code: B65535-B3
4 solder terminals
8 solder terminals
3
M1,4
M1,4
Thread for
Gewindeführung
für
adjusting screw
Abgleichschraube
14,6 max.
8
6
Erdungsanschluß
Ground terminal
9,5 max.
ø0,5
12,3 max.
9,5 max.
Hole arrangement
View in mounting
direction
c
4
2
1
1+0,1 1)
Ground
Erdungspunkt
3
Erdungsanschluß
Ground terminal
a
3,5 max.
b
7
2,54
3,5 max.
a
M1,4
M1,4
Thread for
Gewindeführung
für
adjusting screw
Abgleichschraube
1
5
3
4
12,3 max.
ø0,5
Hole arrangement
View in mounting
direction
Ground
Erdungspunkt
5
8
4
1
FPK0293-D
1)
a)
b)
c)
2
4
1+0,1 1)
1
12,3 max.
2
2,54
FPK0294-L
1,3 hole also permissible
Yoke
Terminal carrier with 4 solder terminals
Terminal carrier with 8 solder terminals
326 08/01
P 11 × 7
B63399
Accessories
B65539
Adjusting screw
■ Tube core with thread and core brake made of GFR polyterephthalate
Plastic adjusting screwdriver (not shown)
Plastic handle for adjusting screwdriver (not shown)
Core P 11 × 7
Material
A L value
nH
Adjusting screw
Tube core
∅ × length
mm
Material Color
code
Min.
adjusting
range
Ordering code
%
K1
25
40
1,81 × 2,0
K1
yellow
30
12
B65539-C1003-X1
M 33
40
63
1,81 × 2,0
Si 1
black
17
11
B65539-C1003-X101
N 48
100
1,81 × 2,0
K1
yellow
17
B65539-C1003-X1
160
250
1,81 × 2,7
N 22
red
16
8
B65539-C1002-X22
Adjusting screwdriver
B63399-B4
Handle
B63399-B5
Adjusting screw
327 08/01
Herausgegeben von EPCOS AG
Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
 EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfältigung, Veröffentlichung, Verbreitung und
Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG
nicht gestattet.
Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften
zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen
für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland.
Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte
darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen.
Published by EPCOS AG
Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited.
The information contained in this brochure describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for
the Supply of Products and Services of the Electrical and Electronics Industry recommended by the
ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
1
Similar pages