BHL CONNECTOR Crimp 2.3mm Emboss Tape Disconnectable Crimp style connectors (.091") pitch Features ––––––––––––––––––––––– • Contact lances Contacts are secured in the housing by their spring action, thus fully shrouded. This helps improve the withstanding voltage. • Anti-misinsertion housing The housing has mis-insertion preventive guides on both sides. Housing locks prevent release of the housing that might result from vibration or shock. Low profile connector with high withstanding voltage, designed for connecting liquid crystal display backlight lamps to their starters. The BHL connector is 2.8mm (.110") thick, so the mounting height is only 3mm (.118"). Specifications –––––––––––––––––– H JS T BHL • Current rating: 1.0A AC, DC • Voltage rating: 1,400V AC, DC • Temperature range: -25˚C to +85˚C (including temperature rise in applying electrical current) • Contact resistance: Initial value/10m Ω max. After environmental testing/20m Ω max. • Insulation resistance: 1,000M Ω min. • Withstanding voltage: 3,800V AC/minute • Applicable wire: Conductor/AWG #28 to #24 Insulation O. D./0.9 to 1.7mm(.035" to .067") * Contact JST for details. 35 BHL CONNECTOR Contact ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Model No. SBHL-002T-P0.5 0.08 to 0.22 28 to 24 0.9 to 1.7(.035 to .067) 10,000 Material and Finish 5.75(.226) 0.9 1.3 (.035) (.051) Applicable wire Q’ty / reel AWG # Insulation O.D. mm(in.) mm2 2.45 (.096) Phosphor bronze, tin-plated 1.5(.059) 0.85(.033) 1.2 (.047) Housing –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Circuits 2 7.5(.295) Model No. BHLR-02VS Q'ty / bag 1,000 Meterial 2.8(.110) Thermosetting resin, UL94V-0, black 8.5(.335) H JST 2.3 (.091) 2.2 (.087) 6.8(.268) Shrouded header ––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Circuits 2 Model No. SM02B-BHLS-1-TB Material and Finish 10.9(.429) 7.5(.295) Note: The products listed above are supplied on embossed-tape. 2.8 (.110) H JST 2.3(.091) 36 Post: Brass, copper-undercoated, tin/lead-plated Wafer: Heat resistant resin, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin/lead-plated Q’ty / reel 1,500 BHL CONNECTOR Taping specifications ––––––––––––––––––––––––––––––––––––––––––––––––––––– Feeding direction Feeding direction 100(3.937)dia. 380±2.0(14.961±.079)dia. Carrier tape 25.5+- 2.5 1.0 (1.004 -+.098 .039 ) 1.55±0.05 (.061±.002)dia. Lead tape 20 vacancies min. Tail tape 40.0(1.575)min. Connetor loaded area 400(15.748)min. 2.0±0.5(.079±.020) 4.0±0.1 2.0±0.1 (.157±.004) (.079±.004) 16.0±0.1(.630±.004) 7.5±0.1 (.295±.004) 1.75±0.1(.069±.004) 16.0±0.1(.630±.004) [13.0(.512)dia.] Cover tape leader area Cover tape 0.3±0.05(.012±.002) Carrier tape Note: 1. Specifications conform to JIS C 0806. The tape width, connector loading recess square hole dimensions, etc. are determined by the number of circuits and external shape of the connector to be loaded. 2. Specifications are subject to change without prior notice. PC board layout (viewed from component side) and Assembly layout –––––––––––––––––– Solder tab 1.7 ) (.067 ) 2.8 (.110) 6.5±0.05 (.256±.002) 12.3(.484) 1.0+ 00.1 (.039+.004 0 ) 0.8+0.1 0 (.031+.004 0 ) 0.2 (.008 Solder tail + 0.1 0 +.004 0 0.3±0.05 (.012±.002) + 0.1 0 +.004 0 0 7.8 - 00.1 (.307- .004 ) +.004 9.9+ 0.1 0 (.390 0 ) 37