Dallas DS9093N-G Ibutton key ring mount Datasheet

DS9093A, DS9093F, DS9093N
iButton Key Ring Mounts
www.maxim-ic.com
FEATURES
KEY RING MOUNTS
§
Low-cost key ring mounts that hold an
iButton® for thumbpad applications.
§ Key ring mount versions:
- DS9093A snap-in angled fob for use with
F5 MicroCan®.
- DS9093F snap-in fob for use with F5
MicroCan.
- DS9093N angled fob for use with F5
MicroCan.
§ DS9093A is available in the following colors
other than standard black. When ordering,
please note that there is a separate part
number per color.
- DS9093A = Black
- DS9093A-B = Blue
- DS9093A-Y = Yellow
- DS9093A-R = Red
- DS9093A-G = Green
DS9093F
DS9093N
DS9093A
iButton and MicroCan are registered trademarks of Dallas Semiconductor.
1 of 2
082103
DS9093A/F/N
DESCRIPTION
The DS9093F plastic snap-in fob offers the simplest way to mount an iButton for applications that require
only momentary contact. The fob can be attached to a key ring for carrying. Do not apply solvents or
adhesives to this fob. This might affect the mechanical strength and reliability.
The DS9093N angled fob is an alternate way to mount an iButton for applications that require only
momentary contact. Due to the different mounting technique, the DS9093N can be used with the F5
MicroCan only. The iButton is inserted into this fob by press-fitting. For permanent mount, the iButton
can be locked by a DS9093RA Lock Ring.
The DS9093A is very similar to the DS9093N. It has about the same size as the DS9093N and can be
used with the F5 MicroCan only. The iButton is inserted by press-fitting the flange of the MicroCan into
the cavity of the fob. In contrast to the DS9093N, no additional parts are needed for permanent mounting.
The DS9093A is available in black, blue, green, red, and yellow.
2 of 2
Similar pages