DC AXIAL FAN 40x40x20mm FAD1-04020 Series Features: Motor: Brushless DC Motor Protection: Impedance Protected Bearing Type: Two Ball, Sleeve, or Hydro Dynamic Connection: UL 1007 AWG 26, 295mm Wire Leads Frame Material: Plastic UL94V-0 Impeller Material: Plastic UL94V-0 Operating Temp: Two Ball: -10°C~70°C Sleeve: -10°C~60°C Hydro Dynamic: -10°C~70°C Life Expectancy: Two Ball: 70,000 Hours Sleeve: 30,000 Hours Hydro Dynamic: 50,000 Hours Fan-S Division Model No. Volt. Current Power Rated Speed (VDC) (A) (W) (rpm) Maximum AirFlow (CMM) (CFM) Maximum Static Pressure (InAq) (mmAq) Noise Level (dB/A) Weight (g) FAD1-04020B * AW11 5 0.09 0.45 4200 0.127 4.489 0.080 2.032 17.5 28.0 FAD1-04020B * LW11 5 0.14 0.70 6200 0.198 6.999 0.165 4.191 30.0 28.0 FAD1-04020B * MW11 5 0.16 0.80 6900 0.219 7.741 0.200 5.080 33.0 28.0 FAD1-04020B * HW11 FAD1-04020C * AW11 5 0.25 1.25 7800 0.249 8.802 0.280 7.112 36.0 28.0 12 0.04 0.48 4200 0.127 4.489 0.080 2.032 17.5 28.0 FAD1-04020C * LW11 FAD1-04020C * MW11 12 0.07 0.84 6200 0.198 6.999 0.165 4.191 30.0 28.0 12 0.08 0.96 6900 0.219 7.741 0.200 5.080 33.0 28.0 FAD1-04020C * HW11 FAD1-04020C * JW11 12 0.10 1.20 7800 0.249 8.802 0.280 7.112 36.0 28.0 12 0.14 1.68 8500 0.271 9.579 0.320 8.128 37.5 28.0 FAD1-04020D * AW11 FAD1-04020D * LW11 24 0.14 1.68 4200 0.127 4.489 0.080 2.032 17.5 28.0 24 0.05 1.20 6200 0.198 6.999 0.165 4.191 30.0 28.0 FAD1-04020D * MW11 FAD1-04020D * HW11 24 0.06 1.44 6900 0.219 7.741 0.200 5.080 33.0 28.0 24 0.07 1.68 7800 0.249 8.802 0.280 7.112 36.0 28.0 * Indicates “B” (Ball Bearing), “S” (Sleeve), or “H” (Hydro Dynamic) Noise is measured at the distance of one (1) meter from the axis of intake. A J ISO-9001 Company Qualtek Electronics Corporation www.qualtekusa.com