D4SB10 - D4SB100 GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER D3-SB VOLTAGE RANGE: 100 - 1000V CURRENT: 6.0 A Features Plastic Package has Underwriters Laboratory Flammability Classification 94V-0 This Series is UL listed under the Recognized Component index, file number E231047 Single-in-line package High current capacity with small package Superior thermal conductivity High temperature soldering guaranted: 260°C / 10 seconds High IFSM C R S J N F H Q B G K D P E L L L Mechanical Data · A REF. Case: D3-SB, Molded Plastic A B C D E G J F Millimeter Min. Max. 24.7 25.3 14.7 15.3 4.58 4.62 17.0 18.0 0.50 0.90 4.50 REF. 3.50 3.90 9.3 9.7 REF. K L N P Q R S H Millimeter Min. Max. 2.50 2.90 7.30 7.70 3 X 45° 0.90 1.10 1.50 REF. 3.00 3.40 0.8 1.2 3.0 4.0 Maximum Ratings TA = 25C unless otherwise specified PARAMETERS Maximum repetitive voltage Maximum DC reverse current at @TA=25°C rated DC blocking voltage @TA=125°C Average rectified forward @TC=100°C current 60Hz Sine wave @TA=25°C Resistance load Peak Forward Surge Current 10ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage @ 3.0A Dielectric strength terminals to case, AC 1 minute Current 1mA Maximum thermal on P.C.B without heat-sink Resistance per leg on AI plate heat-sink Operating and Storage Temperature Range SYMBOL D4SB 10 D4SB 20 V RM 100 200 IR IO D4SB D4SB 40 60 400 600 10 500 6 (1) 2.8 (2) D4SB 80 D4SB 100 UNITS 800 1000 V A A IFSM 150 A VF 1.1 V Vdia 2.5 KV RθJA 22 (2) RθJC 3.4 (1) TJ , TSTG 150 , -40 ~ 150 °C / W °C Notes: (1) Unit case mounted on AI plate heat-sink (2) Unites mounted on P.C.B. without heat-sink (3) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw {heat-sink size:6.5 * 4.0 * 0.3cm} 1 of 2 www.sunmate.tw 2 of 2 www.sunmate.tw