DATASHEET Rev E DCQEB75 SERIES 2:1 Input Voltage Ranges Industry Standard Quarter-Brick Package Up to 75 Watts, Single Outputs DC/DC Power Converters FEATURES Up to 75 Watts Output Power Single Outputs Output Current up to 25A Industry Standard Quarter-Brick Package: 2.28” x 1.45” x 0.50” Under Voltage Lockout Fixed Switching Frequency Input to Output Isolation: 1600VDC APPLICATIONS Telecom/Datacom Wireless Networks Industry Control Systems Semiconductor Equipment Distributed Power Architectures OPTIONS Heatsinks Pin Lengths Thru-Hole Inserts Negative Logic Remote ON/OFF 2:1 Wide Input Voltage Range High Efficiency up to 90% No Minimum Load Required Adjustable Output Voltage Threaded Inserts and Thru-Hole Inserts Available Short Circuit, Over Voltage, Over Current, and Over Temp. Protection Compliant to RoHS EU Directive 2002/95/EC CE Mark Meets 2006/95/CE, 93/68/EEC, and 2004/108/EC UL60950-1, EN60950-1, and IEC60950-1 Safety Approvals (See Note 12) DESCRIPTION The DCQEB75 series of DC/DC power converters provides up to 75 Watts of output power in an industry standard 2.28” x 1.45” x 0.50” quarter-brick package and footprint. This series consists of single output models with 2:1 input voltage ranges of 18-36VDC or 36-75VDC. Some features include high efficiency up to 90%, adjustable output voltage, remote sense, and positive or negative remote ON/OFF control. This series is RoHS compliant and has UL60950-1, EN60950-1, and IEC60950-1 safety approvals (see note 12). Several different options are available for this series including negative remote ON/OFF control, heatsinks, pin lengths, and thru-hole inserts. Please call factory for more details. 03/09/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 1 of 5 DCQEB75 Series 75W, Single Outputs Quarter-Brick Package DC/DC Power Converters Rev E SPECIFICATIONS: DCQEB75 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max 18 36 24 48 36 75 18 36 Unit INPUT SPECIFICATIONS Input Voltage Range Start-up Voltage Shutdown Voltage Input Surge Voltage Input Current Input Filter OUTPUT SPECIFICATIONS Output Voltage Line Regulation Load Regulation Voltage Accuracy Voltage Adjustability (See Note 5) Output Power Output Current Minimum Load Ripple & Noise Transient Response Recovery Time Power Up Start-Up Time Remote ON/OFF Remote Sense (See Note 5) Temperature Coefficient PROTECTION Over Voltage Protection Threshold Over Current Protection Threshold Short Circuit Protection Over Temperature Protection GENERAL SPECIFICATIONS Efficiency Switching Frequency Input to Output Isolation Voltage Input to Base-plate Output to Base-plate Isolation Resistance Isolation Capacitance REMOTE ON/OFF (See Note 6) DC/DC ON Positive Logic (standard) DC/DC OFF DC/DC ON Negative Logic (optional) DC/DC OFF Input Current of Remote Control Pin Remote Off Input Current ENVIRONMENTAL SPECIFICATIONS Operating Base-Plate Temperature (See Note 7) Storage Temperature Relative Humidity Thermal Shock Vibration MTBF (See Note 1) 24VDC nominal input models 48VDC nominal input models 24VDC nominal input models 48VDC nominal input models 24VDC nominal input models 48VDC nominal input models 24VDC nominal input models 48VDC nominal input models 15 32 50 100 VDC +0.2 +0.3 +1.5 +10 % % % % See Table L-C Type See Table Low line to high line at full load No load to full load -0.2 -0.3 -1.5 -20 See Table See Table 0 Measured at nominal input and full load with 20MHz BW and 1µF M/C and 10µF T/C capacitors in parallel. 25% load step change % 100 mVp-p 200 25 25 Nominal input and constant resistive load 10 -0.02 Non-latching Hiccup 110 +0.02 120 140 Hiccup, automatic recovery +110 Nominal input and full load 270 297 2500 Nominal input Nominal input -0.5 -40 -55 5 Non-condensing BELLCORE TR-NWT-000332 MIL-HDBK-217F µs ms ms % Vo %/°C % Vo % Io °C See Table 243 1600 1000 1000 10 For 1 minute For 1 minute For 1 minute 2,500,000 442,200 Open or 3V < Vr < 15V Short or 0V < Vr < 1.2V Short or 0V < Vr < 1.2V Open or 3V < Vr < 15V 1 2.5 +100 +125 95 MIL-STD-810F MIL-STD-810F KHz VDC VDC VDC MΩ pF mA mA °C °C % RH Hours Hours 1.46oz (42g) 2.28 x 1.45 x 0.50 inches (57.9 x 36.8 x 12.7 mm) Aluminum base-plate Safety Approvals 03/09/2012 VDC VDC 100ms PHYSICAL SPECIFICATIONS Weight Dimensions (L x W x H) Case Material SAFETY & EMC CHARACTERISTICS EMI (See Note 8) Radiated Immunity Fast Transient (See Note 9) Surge (See Note 9) Conducted Immunity VDC EN55022 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 UL60950-1, IEC60950-1, EN60950-1 (DCQEB75-48S1.8, 48S2.5, 48S3.3, and 48S05 have approvals; approvals pending for all other models) Class A 10 V/m Perf. Criteria A ±2KV Perf. Criteria B ±1KV Perf. Criteria B 10 Vrms Perf. Criteria A Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 2 of 5 DCQEB75 Series 75W, Single Outputs Quarter-Brick Package DC/DC Power Converters Rev E MODEL SELECTION TABLE Model Number (12) Input Voltage Range DCQEB75-24S3.3 DCQEB75-24S05 24VDC DCQEB75-24S12 (18 - 36 VDC) Output Current Output Voltage Min. load Full load 3.3 VDC 0mA 20A 5 VDC 0mA 15A Input Current Ripple & Noise (4) Output Power Efficiency (4) 3198mA 66W 89% 3634mA 75W 90% No Load (3) Full Load (2) 100mVp-p 65mA 100mVp-p 110mA 12 VDC 0mA 6.25A 100mVp-p 40mA 3662mA 75W 90% DCQEB75-24S15 15 VDC 0mA 5A 100mVp-p 50mA 3634mA 75W 90% DCQEB75-48S1.8 1.8 VDC 0mA 25A 100mVp-p 60mA 1157mA 45W 85% DCQEB75-48S2.5 2.5 VDC 0mA 25A 100mVp-p 50mA 1569mA 62.5W 87% DCQEB75-48S3.3 48 VDC 3.3 VDC 0mA 20A 100mVp-p 70mA 1599mA 66W 90% DCQEB75-48S05 (36 - 75 VDC) 5 VDC 0mA 15A 100mVp-p 80mA 1817mA 75W 90% DCQEB75-48S12 12 VDC 0mA 6.25A 100mVp-p 50mA 1831mA 75W 90% DCQEB75-48S15 15 VDC 0mA 5A 100mVp-p 50mA 1817mA 75W 90% NOTES 1. BELLCORE TR-NWT-000332. Case 1: 80% Stress, Temperature at 40°C. MIL-HDBK-217F Notice2 @Ta=25°C, Full load (Ground, Benign, controlled environment). 2. Maximum value at nominal input voltage and full load. 3. Typical value at nominal input voltage and no load. 4. Typical value at nominal input voltage and full load. 5. Maximum output deviation is +10% inclusive of trim. If remote sense is not being used the +SENSE should be connected to its corresponding +OUTPUT and likewise the -SENSE should be connected to its corresponding –OUTPUT. 6. The remote ON/OFF control pin voltage is referenced to –INPUT. To order negative logic Remote ON/OFF control add the suffix “R” to the model number (Ex: DCQEB75-48S05R). 7. Heatsink is optional and P/N: 7G-0029A-F, 7G-0030A-F, 7G-0031A-F, and 7G-0032A-F. 8. The DCQEB75 series meets EN55022 Class A and Class B only with external components added before the input pins to the converter. 9. An external input filter capacitor is required if the module has to meet EN61000-4-4 and EN61000-4-5. We recommend Nippon chemi-con KY series, 220µF/100V, ESR 48mΩ. 10. BASE-PLATE GROUNDING: EMI can be reduced when you connect the four screw bolts to the shield plane. 11. The converter is provided with basic insulation. 12. Safety Approvals: DCQEB75-48S1.8, 48S2.5, 48S3.3, and 48S05 have safety approvals; approvals pending for all other models. 13. This series comes with several different options: Negative remote ON/OFF control, pin lengths, thru-hole inserts, and heatsinks. CAUTION: The power module is not internally fused. An input line fuse must always be used. DERATING DCQEB75-48S05 Derating Curve With Heatsink 7G-0029A-F 120 120 100 100 Output Power (%) Output Power (%) DCQEB75-48S05 Derating Curve 80 0 LFM 60 40 100 LFM 200 LFM 300 LFM 20 400 LFM 80 0 LFM 60 40 -20 200 LFM 300 LFM 20 400 LFM 500 LFM 500 LFM 0 -40 100 LFM 0 20 24 40 60 80 100 120 0 -40 Ambient Temperature (°C) 03/09/2012 -20 0 20 34 40 60 80 100 120 Ambient Temperature (°C) Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 3 of 5 DCQEB75 Series 75W, Single Outputs Quarter-Brick Package DC/DC Power Converters Rev E CHARACTERISTICS DCQEB75-48S05 Efficiency vs Output Load 95 91 90 90 85 EFFICIENCY(%) EFFICIENCY(%) DCQEB75-48S05 Efficiency vs Input Voltage 92 89 88 87 80 75 70 65 86 60 85 36 40 44 48 52 56 60 64 68 72 10 75 20 Input Voltage (VDC) 30 40 50 60 70 80 90 100 Output Load (% of Full Load) Recommended Filter for EN55022 Class B Compliance C10 C12 +Vin C3 L1 L2 C7 C8 C9 DCQEB75-24Sxx C2 6.8µF/50V C7 6.8µF/50V C12 1.0nF/3KV L2 620µH C3 6.8µF/50V C8 6.8µF/50V C13 1.0nF/3KV C4 6.8µF/50V C9 6.8µF/50V C14 1.0nF/3KV C5 1.5nF/3KV C10 0.1µF/50V C15 1.0nF/3KV DCQEB75-48Sxx C1 100µF/100V C6 1.5nF/3KV C11 0.1µF/50V L1 620µH C2 1.5µF/100V C7 47µF/100V C12 1.0nF/3KV L2 620µH C3 1.5µF/100V C8 1.5µF/100V C13 1.0nF/3KV C4 1.5µF/100V C9 1.5µF/100V C14 1.0nF/3KV C5 1.5nF/3KV C10 0.1µF/50V C15 1.0nF/3KV C14 C6 C1 C2 C1 6.8µF/50V C6 1.5nF/3KV C11 0.1µF/50V L1 620µH +Vin CASE +Vo -Vin CASE -Vo C4 -Vin C5 C13 C15 C11 CHASSIS GROUND SHIELD PLANE Recommended EN55022 Class B Filter Circuit Layout DCQEB SERIES 03/09/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 4 of 5 DCQEB75 Series 75W, Single Outputs Quarter-Brick Package DC/DC Power Converters Rev E MECHANICAL DRAWING Unit: inches (mm) 2.28 (57.9) 0.21 (5.3) 1.860 (47.24) 1.030 (26.16) 0.600 (15.24) 0.450 (11.43) 7 PIN CONNECTIONS FUNCTION PIN Ø -INPUT Ø.040 (1.02) CTRL Ø.040 (1.02) +INPUT Ø.040 (1.02) -OUTPUT Ø.060 (1.52) -SENSE Ø.040 (1.02) TRIM Ø.060 (1.52) +SENSE Ø.040 (1.02) +OUTPUT Ø.060 (1.52) PIN 1 2 3 4 5 6 7 8 8 3 0.300 (7.62) 6 2 5 0.300 (7.62) BOTTOM VIEW 0.300 (7.62) 1.45 (36.8) 1 4 0.43 (10.9) 0.150 (3.81) 0.02 (0.5) 1. Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 0.14 (3.6) 0.20 (5.1) 2.000 (50.80) 2. Pin Pitch Tolerance: ±0.01 (±0.25) 0.50 (12.7) 3. Pin Dimension Tolerance: ±0.004 (±0.1) Threaded (Standard) 4-M3X0.5 Thru-Hole (Option) 4-Ø0.126 (Ø3.2) PRODUCT OPTIONS SUFFIX 0.200” pin length none 0.145” pin length S 0.200” pin length R Negative remote ON/OFF logic 0.145” pin length RL Ø0.126 (Ø3.2) thru-hole (1) Thru-Hole Inserts TH (no thread) inserts NOTES 1. Models with thru-hole inserts cannot be equipped with a heatsink. Positive remote ON/OFF logic PRODUCT OPTIONS 7G-0029A-F 7G-0030A-F Heatsinks 7G-0031A-F 7G-0032A-F SUFFIX EXTERNAL OUTPUT TRIMMING H H1 H2 H3 Output can be externally trimmed by using the method shown below. TRIM UP TRIM DOWN 7 6 RU 6 RD 5 COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 03/09/2012 (603)778-2300 (888)587-9255 (603)778-9797 [email protected] www.wallindustries.com 5 Watson Brook Rd. Exeter, NH 03833 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 5 of 5