EPCOS B82498F3121J000 Smt inductor Datasheet

SMT inductors
SIMID series, SIMID 0805-F
Series/Type:
B82498F
Date:
March 2008
Data Sheet
 EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SMT inductors, SIMID series
B82498F
SIMID 0805-F
Size 0805 (EIA) and/or 2012 (IEC)
Rated inductance 2.7 nH to 6800 nH
Rated current 80 mA to 1000 mA
Construction
■ Cubic coil with ceramic or ferrite core
■ Epoxy-molded flat top for vacuum pickup
■ Winding ends welded to terminals
Features
■
■
■
■
High resonance frequency
Close inductance tolerance
Suitable for lead-free reflow soldering
RoHS-compatible
Applications
Resonant circuits, impedance matching for
■ Antenna amplifiers
■ Multimedia
■ Wireless communication systems
■ Car access systems
■ TPMS (Tire Pressure Monitoring System)
■ GPS (Global Positioning System)
Terminals
■ Standard version:
– Base material Al2O3 ceramic and ferrite
– Thick-film coating of Ag/Pd/Pt
■ Gold-plated terminals:
– Base material Al2O3 ceramic
– Layer composition W/Ni/Au
– Electro-plated
Marking
■ No marking on component
■ Minimum data on reel:
Manufacturer, ordering code, L value, quantity, date of packing
Delivery mode and packing unit
■ 8-mm blister tape, wound on 180-mm reel
■ Packing unit: 3000 pcs./reel
Please read Cautions and warnings and
Important notes at the end of this document.
2
03/08
SMT inductors, SIMID series
B82498F
SIMID 0805-F
Dimensional drawing and layout recommendation
2.3 max.
1)
A
2+0.2
1.3±0.1
Metallization
Welding
C
area 2)
B
Epoxy coating
0.5±0.11)
IND0041-C
0.5±0.11)
0.2 min.1)
0.8 max.
1.4 max.
1.7 max.
A
B
C
1.5 ±0.2
3.2 ±0.4
1.0 ±0.1
1) Soldering area
2) This area (30% of contact area) should not be used
to assess solderability
Dimensions in mm
IND0542-S-E
Taping and packing
Reel
<_ 3.3
8±0.3
2±0.05
14.4 max.
1.9 max.
13±0.25
178±2
_0
1.5 +0.1
3.5±0.05
4±0.1
Component
1.75±0.1
Blister tape
_0
8.4 +1.5
4±0.1
ø60 min.
Direction of unreeling
IND0554-E-E
Dimensions in mm
Please read Cautions and warnings and
Important notes at the end of this document.
3
03/08
IND0581-C
SMT inductors, SIMID series
B82498F
SIMID 0805-F
Technical data and measuring conditions
Rated inductance LR
Measured with impedance analyzer Agilent 4291A and
test fixture Agilent 16197A at frequency fL, 0.1 V, 20 °C.
Pad distance 0.9 ±0.1 (mm)
Short inductance 200 pH unconsidered
Q factor Qmin
Measured with impedance analyzer Agilent 4291A and
test fixture Agilent 16197A at frequency fQ, 20 °C.
Pad distance 0.9 ±0.1 (mm)
Short inductance 200 pH unconsidered
Rated temperature TR
105 °C
Rated current IR
Maximum permissible DC with inductance decrease
∆L/L0 ≤ 10% and temperature increase
of ≤ 20 K at rated temperature
Self-resonance frequency fres,min
Measured with network analyzer Agilent 8720D, 20 °C
DC resistance Rmax
Measured at 20 °C
Solderability (lead-free)
Sn95.5Ag3.8Cu0.7: (245 ±5) °C, (5 ±0.3) s
Wetting of soldering area ≥ 90%
(based on IEC 60068-2-58)
Resistance to soldering heat
Standard version:
260 °C, 20 s (as referenced in JEDEC J-STD 020C)
Gold-plated terminals:
260 °C, 40 s (as referenced in JEDEC J-STD 020C)
Climatic category
55/125/56 (to IEC 60068-1)
Storage conditions
Mounted: −55 °C … +125 °C
Packaged: −25 °C … +40 °C, ≤ 75% RH
Weight
Approx. 10 mg
Please read Cautions and warnings and
Important notes at the end of this document.
4
03/08
SMT inductors, SIMID series
B82498F
SIMID 0805-F
Characteristics and ordering codes
LR
Tolerance
nH
fL
Qmin
MHz
fQ
IR
Rmax
fres,min
MHz
mA
Ω
MHz
Ordering code 1)2)
(standard version)
Core material: ceramic
2.7
±10%
250
50
1500
1000
0.03
9000
B82498F3279K000
5.6
250
50
1000
900
0.04
7000
B82498F3569K000
6.8
250
50
1000
800
0.05
6000
B82498F3689K000
8.2
250
50
1000
700
0.09
5000
B82498F3829K000
^
K
10
±2%
^
G
250
50
500
700
0.09
5000
B82498F3100+000
12
±5%
^
J
250
50
500
700
0.09
4000
B82498F3120+000
15
250
50
500
650
0.13
3300
B82498F3150+000
18
250
60
500
700
0.08
3300
B82498F3180+000
22
250
60
500
700
0.08
2500
B82498F3220+000
27
250
60
500
700
0.09
2500
B82498F3270+000
33
250
65
500
600
0.11
2200
B82498F3330+000
39
250
65
500
600
0.12
2100
B82498F3390+000
47
200
65
500
600
0.13
2000
B82498F3470+000
56
200
60
500
600
0.14
1700
B82498F3560+000
68
200
60
500
500
0.18
1600
B82498F3680+000
82
150
60
500
500
0.19
1500
B82498F3820+000
100
150
55
500
450
0.28
1350
B82498F3101+000
120
150
50
250
440
0.31
1250
B82498F3121+000
150
100
45
250
400
0.42
1150
B82498F3151+000
180
100
45
250
340
0.53
1050
B82498F3181+000
220
100
45
250
320
0.70
950
B82498F3221+000
270
100
45
250
270
1.0
900
B82498F3271+000
330
100
45
250
220
1.5
800
B82498F3331+000
390
100
40
250
210
1.6
700
B82498F3391+000
470
50
30
100
190
1.9
650
B82498F3471+000
560
25
23
50
230
1.3
400
B82498F3561+000
680
25
23
50
190
1.7
300
B82498F3681+000
820
25
23
50
180
1.9
300
B82498F3821+000
Higher currents possible at temperatures <TR on request.
Sample kit for standard version available. Ordering code: B82498X001
For more information refer to chapter “Sample kits”.
1) For gold-plated terminals the last digit has to be a “1”. Example: B82498F3279K001
2) Replace the + by the code letter for the required inductance tolerance.
Please read Cautions and warnings and
Important notes at the end of this document.
5
03/08
SMT inductors, SIMID series
B82498F
SIMID 0805-F
Characteristics and ordering codes
LR
Tolerance
nH
fL
Qmin
MHz
fQ
IR
Rmax
fres,min
MHz
mA
Ω
MHz
Ordering code 1)
(standard version)
Core material: ferrite
1000
±5%
7.96
20
7.96
240
0.55
440
B82498F1102J000
1200
7.96
20
7.96
220
0.65
420
B82498F1122J000
1500
7.96
20
7.96
200
0.70
380
B82498F1152J000
1800
7.96
20
7.96
190
0.98
350
B82498F1182J000
2200
7.96
20
7.96
130
1.60
330
B82498F1222J000
2700
7.96
20
7.96
120
2.0
270
B82498F1272J000
3300
7.96
20
7.96
100
3.3
250
B82498F1332J000
3900
7.96
20
7.96
95
3.6
230
B82498F1392J000
4700
7.96
20
7.96
90
3.8
210
B82498F1472J000
5600
7.96
20
7.96
85
4.3
180
B82498F1562J000
6800
7.96
20
7.96
80
4.7
140
B82498F1682J000
^
J
Higher currents possible at temperatures <TR on request.
Sample kit of standard version available. Ordering code: B82498X001
For more information refer to chapter “Sample kits”.
1) Replace the + by the code letter for the required inductance tolerance.
Please read Cautions and warnings and
Important notes at the end of this document.
6
03/08
SMT inductors, SIMID series
B82498F
SIMID 0805-F
Impedance |Z| vs. frequency f (ceramic core)
measured with impedance analyzer
Agilent 4291A, typical values at 20 °C
Impedance |Z| vs. frequency f (ferrite core)
measured with impedance analyzer
Agilent 4291A, typical values at 20 °C
IND0546-M
10 5
Ω B82498F
|Z|
|Z|
10
10 4
4
820 nH
470 nH
100 nH
10 3
10 2
10 1
10 1
10
7
6800 nH
4700 nH
2700 nH
1000 nH
10 3
10 2
10 0 6
10
10
8
Hz 10
f
10 0 6
10
9
Q factor versus frequency f (ceramic core)
measured with impedance analyzer
Agilent 4291A, typical values at 20 °C
10 7
10 8
Hz 10 9
f
Q factor versus frequency f (ferrite core)
measured with impedance analyzer
Agilent 4291A, typical values at 20 °C
IND0544-Z
90
IND0545-U
40
B82498F
Q
IND0547-K
10 5
Ω B82498F
B82498F
80
Q 35
70
60
50
40
30
27 nH
100 nH
470 nH
820 nH
6.8 nH
2.7 nH
6800 nH
4700 nH
2700 nH
1000 nH
25
20
30
15
20
10
10
0 6
10
10 7
10 8
5 6
10
Hz 10 9
f
7
03/08
10 7
Hz 10 8
f
SMT inductors, SIMID series
B82498F
SIMID 0805-F
Inductance L versus DC load current IDC
measured with RF LCR meter
Agilent 4275A, typical values at 20 °C
IND0549-G
10 1
µH
6.8 µH
4.7 µH
L
10
Current derating Iop/IR
versus ambient temperature TA
(rated temperature TR = 105 °C)
B82498F
I op
IR
2.7 µH
B82498F
1.0
1 µH
0
0.82 µH
10
IND0548-H
1.2
_1
0.10 µH
_2
0.01 µH
0.8
0.6
0.4
10
0.2
10
_3
10
_2
10
_1
10 0
0
A 10 1
0
I DC
8
03/08
20
40
60
80
100
C 140
TA
Cautions and warnings
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read Cautions and warnings and
Important notes at the end of this document.
9
03/08
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with
them than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very
high level of operational safety and especially in customer applications in which the malfunction
or failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of
the customer application or other action taken by the customer (e.g. installation of protective
circuitry or redundancy) that no injury or damage is sustained by third parties in the event of
malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue,
MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are
trademarks registered or pending in Europe and in other countries. Further information will be
found on the Internet at www.epcos.com/trademarks.
10
03/09
Similar pages