PRODUCT DATASHEET Anna series last update 16/9/2014 DETAILS Product Number C11715_ANNA-40-5-W Family Anna Type Lens array Color clear Diameter 40 mm Height 10,7 mm Style round Optic Material PMMA Holder Material Fastening pin, glue Status production ready ROHS Comliant Yes Date Updated 16/09/2014 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector XP-G 36 deg Wide 87 % 2.000 - XP-E 36 deg Wide 87 % 1.600 - XB-D 29 deg Wide 85 % 2.170 - LUXEON Rebel 30 deg Wide 86 % 1.900 - LUXEON Rebel ES 29 deg Wide 86 % 2.200 - LUXEON A 34 deg Wide 82 % 1.680 - NCSxx19A 28 deg Wide 86 % 2.000 - NVSxx19A 33 deg Wide 86 % 1.500 - Oslon SSL 80 26 deg Wide 87 % 2.400 - Oslon SSL 150 34 deg Wide 87 % 2.400 - Duris S5 (2 chip) 26 deg Wide 88 % 2.900 - June 5th 2017 8:47 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C D 2.8 10.7 Anna-3 4 4 Anna-4 Anna-7 39. 9 Anna-5 1.5 3 Same top side in all versions 3 0.8 Anna-6 2 1 Versions: Anna-3-S Anna-3-M Anna-3-W Anna-4-S Anna-4-M Anna-4-W Anna-5-S Anna-5-M Anna-5-W Anna-6-S Anna-6-M Anna-6-W Anna-7-S Anna-7-M Anna-7-M2 Anna-7-W 2 25. 1 ah DATE CHECKED BY DATE pv 8.12.2011 DESIGNED BY DATE 30.07.2010 D 2 Same led-circle in all versions Ledil Oy Salorankau 10 FIN-24100 SALO Finland DRAWING TITLE Datasheet Anna40-series Lens 8.12.2011 hh 8 Number of cones varies; 3, 4, 5, 6 and 7pcs on bottom side depending the version. This drawing is our property. It can't be reproduced or communicated without our written agreement. DRAWN BY 30 Same location pin-circle in all versions 5 60 Material: PMMA SIZE A4 SCALE DRAWING NUMBER REV Anna-40 1:1 WEIGHT(g) 4 SHEET A 1/1 1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value.