CHENYI DF06 Single phase glass passivated bridge rectifier Datasheet

CE
DF005 THRU DF10
CHENYI ELECTRONICS
SINGLE PHASE GLASS
PASSIVATED BRIDGE RECTIFIER
Voltage: 50 TO 1000V CURRENT:1.0A
FEATURES
Ideal for printed circuit board
Reliable low cost construction utilizing molded plastic
technique
Surge overload rating: 50A peak
MECHANICAL DATA
. Terminal: Plated leads solderable per
MIL-STD 202E, method 208C
. Case: UL-94 Class V-0 recognized Flame Retardant Epoxy
. Polarity: Polarity symbol marked on body
. Mounting position: any
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Single-phase, half-wave, 60HZ, resistive or inductive load rating at 25
, unless otherwise stated,
for capacitive load, derate current by 20%)
SYMBOL
DF005
DF01
DF02
DF04
DF06
DF08
DF10
units
Maximum Recurrent Peak Reverse Voltage
Vrrm
50
100
200
400
600
800
1000
v
Maximum RMS Voltage
Vrms
35
70
140
280
420
560
700
v
Vdc
50
100
200
400
600
800
1000
v
Maximum DC blocking Voltage
Maximum Average Forward Rectified
current at Ta=40
If(av)
1
A
Ifsm
50
A
Vf
1.1
V
10.0
A
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load
Maximum Instantaneous Forward Voltage at
forward current 1.0A
Maximum DC Reverse Voltage Ta=25
at rated DC blocking voltage
Ta=125
500
A
Typical Junction Capacitance
Cj
25
pF
Operating Temperature Range
Tj
-55 to +125
Tstg
-55 to +150
Storage and operation Junction Temperature
Ir
Note:
1. Measure at 1MHZ and applied reverse voltage of 4.0 volt
Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD
Page 1 of 2
CE
DF005 THRU DF10
CHENYI ELECTRONICS
SINGLE PHASE GLASS
PASSIVATED BRIDGE RECTIFIER
Voltage: 50 TO 1000V CURRENT:1.0A
RATINGS AND CHARACTERISTIC CURVES DF005 THRU DF10
FIG.1-MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
FIG.2-TYPICAL FORWARD CURRENT
DERATING CURVE
FIG.3-TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
FIG.4-TYPICAL REVERSE CHARACTERISTICS
Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD
Page 2 of 2
Similar pages