Resistors Wire Bondable Voltage Divider Network Wire Bondable Voltage DSOT Series Divider Network Tight TCR tracking Extremely DSOT Series small footprint Precision ratio tolerances to ±0.05% • Tight TCR tracking • Extremely smalltantalum footprint nitride resistors Ultra-stable • Precision ratio tolerances to ±0.05% • Ultra-stable tantalum nitride resistors All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2) IRC’s TaNSil® voltage divider networks are ideally suited for low cost divider applications that demand precision performance in a wire IRC’s TaNSil®package. voltage divider networks are ideally suited for low cost divider applications that demand precision performance in a wire bondable bondable package. The tantalum nitride system onprovides silicon precision provides precision tolerance, TCR tracking and miniaThe tantalum nitride film film system on silicon tolerance, exceptional TCR exceptional tracking and miniature ture physical dimensions. Excellent performance in harsh, humid environments is a trademark of IRC’s selfphysical dimensions. Excellent performance in harsh, humid environments is a trademark of IRC’s selfpassivating ® resistor film. passivating TaNSil ® TaNSil resistor film. For applications requiring high performance voltage dividers in adividers miniature,inwire bondable package, specify IRC package, DSOT wire bondable For applications requiring high performance voltage a miniature, wire bondable specify die. IRC DSOT wire bondable die. Electrical Data TCR/Inspection Code Table Resistance Range Each Resistor 10Ω to 200kΩ Resistance Range Each Package 20Ω to 400kΩ Absolute Tolerance to ±0.1% Ratio Tolerance to R1 to ±0.05% Absolute TCR to ±25ppm/°C Tracking TCR to ±5ppm/°C Element Power Rating 125mW @70°C Package Power Rating 250mW @ 70°C Rated Operating Voltage (not to exceed √P x R) 100V Operating Temperature Commercial Code MIL Inspection Code* ±300ppm/°C 00 04 ±100ppm/°C 01 05 ±50ppm/°C 02 06 ±25ppm/°C 03 07 *Notes: Product supplied to Class H of MIL-PRF 38534 include 100% visual inspection Power Derating Data -55°C to + 150°C Noise <-30dB Oxidized Silicon (10KÅ SiO2 minimum) Substrate Material 0.0095˝ ±0.001 (0.241mm ±0.025) Substrate Thickness Bond Pad Metallization Absolute TCR Aluminum 10KÅ minimum Gold1 15KÅ minimum Backside Passivation Silicon (gold available1) Silicon Dioxide or Silicon Nitride Note 1: Not recommended for new designs General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. BI Technologies IRC Welwyn www.ttelectronics.com/resistors © TT Electronics plc 11.17 Wire Bondable Voltage Divider Network DSOT Series Wire Bondable Voltage Divider Network Manufacturing Capabilities Data Resistance Range Available Absolute Tolerances Available Ratio Tolerances Best Absolute TCR Tracking TCR 10Ω - 50Ω F G J K D F G J K ±100ppm/°C ±50ppm/°C 51Ω - 100Ω D F G J K C D F G J K ±100ppm/°C ±25ppm/°C 101Ω - 200Ω C DF G J K B C D F G J K ±50ppm/°C ±10ppm/°C 201Ω - 500Ω B C D F G J K B C D F G J K ±50ppm/°C ±5ppm/°C 501Ω - 400kΩ B C D F G J K A B C D F G J K ±25ppm/°C ±2ppm/°C Environmental Data Test Method Max ∆R Typical ∆R MIL-STD-202 Method 107 Test condition F ±0.1% ±0.02% High Temperature Exposure MIL-STD-883 Method 1008 150°C, 1000 hours ±0.1% ±0.05% Low Temperature Shortage -55°C, 1000 hours ±0.03% ±0.01% Life MIL-STD-202 Method 108 70°C, 1000 hours ±0.5% ±0.01% Life at Elevated Temperature MIL-STD-202 Method 108 125°C, 1000 hours ±0.5% ±0.05% Thermal Shock © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. DSOT Series Issue January 2009 Sheet 2 of 3 BI Technologies IRC Welwyn www.ttelectronics.com/resistors © TT Electronics plc 11.17 Wire Bondable Voltage Divider Network DSOT Series Wire Bondable Voltage Divider Network Physical Data DSOT143 4 0.029˝ ±0.001 (0.737mm ±0.025) 0.035˝ ±0.001 (0.889mm ±0.025) 3 R1 R2 2 1 0.004˝ min Bond Pads 0.035˝ ±0.001 (0.889mm ±0.025) DSOT23 0.025˝ ±0.001 (0.635mm ±0.025) 3 R1 1 R2 2 0.004˝ min Bond Pads Ordering Data Prefix WBD - DSOT23 - 01 - 1002 - 1002 - F B Style DSOT23 = 3-pad divider network DSOT143 = 4-pad divider network Absolute TCR Code 00 = ±250ppm/°C; 01 = ±100ppm/°C; 02 = ±50ppm/°C; 03 = ±25ppm/°C R1 Resistance Code 4-Digit resistance code ex: 1002 = 10KΩ; 50R1 = 50.1Ω R2 Resistance Code 4-Digit resistance code ex: 1002 = 10KΩ; 50R1 = 50.1Ω Absolute Tolerance Code K = ±10%; J = ±5%; G = ±2%; F = ±1%; D = ±0.5%; C = ±0.25%; B = ±0.1% Ratio Tolerance Code G = ±2%; F = ±1%; D = ±0.5%; C = ±0.25%; B = ±0.1%; A = ±0.05% Packaging Standard packaging is 2˝ x 2˝ chip tray. For additional information or to discuss your specific requirements, please contact our Applications Team using the contact details below. © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. DSOT Series Issue January 2009 Sheet 3 of 3 BI Technologies IRC Welwyn www.ttelectronics.com/resistors © TT Electronics plc 11.17