Aimtron AT5660H 5-channel motor driver for dvd/vcd Datasheet

AT5660
Preliminary Product Information
5-Channel Motor Driver for DVD/VCD
Features
Description
˙2 channels of DC motor BTL driver
˙2 channels of BTL driver for coils with
current feedback
˙1 channels forward/reverse control DC motor
driver
˙Built-in suspension function.
˙Built-in thermal shutdown circuit.
˙Operating voltage: 4.5V~13.2V
The AT5660 is a 5-channel BTL driver IC. Two
of them can drive DC motors and two can drive
coils, such as the focus and tracking actuators of
a CD-ROM/DVD-ROM/DVD-Player system,
with current feedback. It also built-in one
channel bi-direction DC motor driver for Tray.
Applications
CD-ROM/DVD-ROM/CD-RW drives
DVD player.
Block Diagram
Aimtron reserves the right without notice to change this circuitry and specifications.
2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.
Tel: 886-3-563-0878
http://www.aimtron.com.tw
Fax: 886-3-563-0879
Email: [email protected]
1
AT5660
Preliminary Product Information
5-Channel Motor Driver for DVD/VCD
Pin Descriptions
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Pin name
IN1
CAP1_1
CAP1_2
IN2
FB1
FWD
REV
VCC1
OUT5OUT5+
OUT2OUT2+
OUT1OUT1+
OUT4+
OUT4OUT3+
OUT3VCC2
FB4
VCTL
GND
IN3
CAP4_2
CAP4_1
IN4VBIAS
MUTE_1_2_3_4
Function
CH1(Focus coil) input
CH1 error amplifier filter capacitor connection 1
CH1 error amplifier filter capacitor connection 2
CH2(Sled driver) input
CH1(Focus coil) feedback pin
CH5 forward input
CH5 reverse input
Power Supply 1
CH5(Tray driver) output(-)
CH5(Tray driver) output(+)
CH2(Sled driver) output (-)
CH2(Sled driver) output (+)
CH1(Focus coil) output (-)
CH1(Focus coil) output (+)
CH4(Tracking coil) output (+)
CH4(Tracking coil) output (-)
CH3(Loader) output (+)
CH3(Loader) output (-)
Power Supply 2
CH4(Tracking coil) feedback pin
CH5 Speed control input
Ground
CH3(Loader) input
CH4 error amplifier filter capacitor connection 2
CH4 error amplifier filter capacitor connection 1
CH4 (Tracking driver) input
VREF input pin
Mute control for CH1,Ch2,CH3,CH4
Notes: The indicated polarities for the output pins are under the condition that all inputs are (+).
The power supplies for the driver output are PVcc1 for the loader, PVcc2 for focus and tracking
drivers, and Vcc for pre-block and sled driver. Therefore, make sure Vcc≧PVcc1,2.
Pin Out
2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.
Tel: 886-3-563-0878
http://www.aimtron.com.tw
Fax: 886-3-563-0879
Email: [email protected]
2
AT5660
Preliminary Product Information
5-Channel Motor Driver for DVD/VCD
Ordering Information
Part number
Package
Marking
AT5660H
28-pin HSOP
AT5660H
Power Dissipation (Ta = 25oC)
Condition: mount on 50x50 mm2
t=1.0mm paper phenol PCB
Absolute maximum ratings (Ta = 25oC)
Parameter
Power supply voltage
Power dissipation
Operating temperature
Storage temperature
Symbol
VCC1,2
Pd
Topr
Tstg
Limits
13.5
1.7
-30~+80
-55~+150
unit
V
W
o
C
o
C
NOTE:*
1. Power dissipation reduces 13.6mW / °C for using above Ta=25°C
2. Do not exceed Pd and SOA.
Recommended operating conditions (Ta = 25oC)
Parameter
Power supply voltage
Symbol
VCC1
VCC2
Limits
4.0~13.2
4.0~Vcc1
unit
V
V
2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.
Tel: 886-3-563-0878
http://www.aimtron.com.tw
Fax: 886-3-563-0879
Email: [email protected]
3
AT5660
Preliminary Product Information
5-Channel Motor Driver for DVD/VCD
Electrical characteristics
(unless otherwise noted, Ta = 25oC,VCC1 =12V, VCC2 =5V, VBIAS=2.5V, RL1= RL2=8Ω, RL3= RL4=12Ω)
Parameter
Quiescent current
Mute quiescent current
Mute ON voltage
Mute OFF voltage
<Actuator driver>
Output current offset
Maximum output voltage
Gain
<Sled motor driver>
Output voltage offset
Maximum output voltage
Closed loop gain
<Loader motor driver>
Output voltage offset
Maximum output voltage
Maximum output voltage
Symbol Min.
IQC
IQSB
VSBON
0
VSBOFF
2.0
Typ.
18
-
Max.
27
5
0.5
-
Unit
Conditions
mA No Load
mA CH5 active
V
V
IO1,2
VO1,2
Gm
-6
3.6
1.3
4.0
1.5
6
1.7
mA
V VIN = VBIAS ±1.5V
A/V VIN = VBIAS ±0.2V
VOFFSL
VO3MAX
GVSL
-100
7.5
18.0
0
9.0
20.0
100
22.0
mV
V
dB
VOFFLD
VO4max1
VO4max2
-50
7.5
3.6
0
9.0
4.0
50
-
mV
V
V
Closed loop gain
Gain error
<Tray motor driver>
Maximum output voltage
GVLD
ΔGVLD
13.5
0
15.5
1
17.5
2
dB
dB
VO5max1
3.8
6.0
-
4.2
V
V
Output voltage offset
Input high level voltage
Input low level voltage
VOFFTR
VIH
VIL
-50
2.0
-
0
-
50
0.8
mV
V
V
VIN = VBIAS ±1.5V
VIN = VBIAS ±0.2V
VIN = VBIAS±2.0V
VIN = VBIAS ±1.5V
VCC1=5V
VIN = VBIAS ±0.2V
VIN = VBIAS±0.2V
RL5=45Ω, RVCTL=400Ω,
RL5=45Ω, RVCTL=0Ω,
VCC1=VCC2=5V
2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.
Tel: 886-3-563-0878
http://www.aimtron.com.tw
Fax: 886-3-563-0879
Email: [email protected]
4
AT5660
Preliminary Product Information
5-Channel Motor Driver for DVD/VCD
Tray Motor Driver
Fig1.
Input
Ouput
FWD
REV
OUT5+
OUT5-
Status
High
High
Low
Low
Break
High
Low
High
Low
Forward
Low
High
Low
High
Reverse
Low
Low
Open
Open
Standby
Tray Motor Speed Control
The amplitude of the output voltage is controlled by VCTL(pin21). If you want to control
differential output voltage of the tray, insert external resistor RVCTL as shown in figure 1.
2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.
Tel: 886-3-563-0878
http://www.aimtron.com.tw
Fax: 886-3-563-0879
Email: [email protected]
5
AT5660
Preliminary Product Information
5-Channel Motor Driver for DVD/VCD
Test Circuit
2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.
Tel: 886-3-563-0878
http://www.aimtron.com.tw
Fax: 886-3-563-0879
Email: [email protected]
6
AT5660
Preliminary Product Information
5-Channel Motor Driver for DVD/VCD
Typical Curve
2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.
Tel: 886-3-563-0878
http://www.aimtron.com.tw
Fax: 886-3-563-0879
Email: [email protected]
7
AT5660
Preliminary Product Information
5-Channel Motor Driver for DVD/VCD
2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.
Tel: 886-3-563-0878
http://www.aimtron.com.tw
Fax: 886-3-563-0879
Email: [email protected]
8
AT5660
Preliminary Product Information
5-Channel Motor Driver for DVD/VCD
2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.
Tel: 886-3-563-0878
http://www.aimtron.com.tw
Fax: 886-3-563-0879
Email: [email protected]
9
AT5660
Preliminary Product Information
5-Channel Motor Driver for DVD/VCD
Application circuit
2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.
Tel: 886-3-563-0878
http://www.aimtron.com.tw
Fax: 886-3-563-0879
Email: [email protected]
10
AT5660
Preliminary Product Information
5-Channel Motor Driver for DVD/VCD
2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.
Tel: 886-3-563-0878
http://www.aimtron.com.tw
Fax: 886-3-563-0879
Email: [email protected]
11
AT5660
Preliminary Product Information
5-Channel Motor Driver for DVD/VCD
Package Outlines (units:mm): HSOP-28
2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.
Tel: 886-3-563-0878
http://www.aimtron.com.tw
Fax: 886-3-563-0879
Email: [email protected]
12
Similar pages