DB101S THRU DB107S SINGLE-PHASE GLASS PASSIVATED SILICON SURFACE MOUNT BRIDGE RECTIFIER REVERSE VOLTAGE 50 to 1000 Volts FORWARD CURRENT 1.0 Ampere DBS FEATURES Plastic material has Underwriters Laboratory Flammability Classification 94V-0 High surge overload rating of 50 Amperes peak Ideal for printed circuit board Glass passivated chip junction MECHANICAL DATA Case: Molded plastic, DBS Epoxy: UL 94V-O rate flame retardant Terminals: Leads solderable per MIL-STD-202, method 208 guaranteed Mounting position: Any Weight: 0.02ounce, 0.4gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified , Dimensions in inches and (millimeters) Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load derate current by 20% SYMBOL DB101S DB102S DB103S DB104S DB105S DB106S DB107S UNIT PARAMETER Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Rectified Current at TA=40℃ (Note 2) I(AV) 1.0 Amps IFSM 30 Amps VF 1.1 Volts Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 1.0A DC and 25℃ Maximum Reverse Current at Rated DC Blocking Voltage 5.0 TA = 25℃ IR uA 500 TA = 125℃ Typical Junction Capacitance (Note 1) CJ 25 pF Typical Thermal Resistance (Note 2) RθJA 40 ℃/W Typical Thermal Resistance (Note 2) RθJL 15 ℃/W TJ,Tstg -55 to +150 ℃ Operating and Storage Temperature Range 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Units mounted on P.C.B. with 0.5 x 0.5" (13 x 13mm) copper pads Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 1 DB101S THRU DB107S RATINGS AND CHARACTERISTIC CURVES Note: Specifications are subject to change without notice. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 2