EB52F5 Series EB52F5 • Temperature Compensated Crystal Oscillator (TCXO) • HCMOS Output • 3.3V Supply Voltage • Stability to 1.5ppm • Internal mechanical trim • External voltage control option available H 8.3 L 20.3 W 13.0 OSCILLATOR NOTES __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range Operating Temperature Range Storage Temperature Range Supply Voltage (VDD) Input Current Frequency Stability Aging (at 25°C) Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise Time / Fall Time Duty Cycle Load Drive Capability Control Voltage Range Control Voltage (External) Frequency Deviation Linearity Internal Trim Input Impedance Phase Noise (at 19.440MHz) Measured at Steady State at 25°C, at Nominal VDD, at Nominal VC vs. Initial Frequency Tolerance vs. Operating Temperature Range vs. Input Voltage (VDD ±5%) vs. Load (±10%) 20% to 80% of Waveform at 50% of Waveform P ositive Transfer Characteristic Referenced to FO at VC = 1.65VDC, VDD = 3.3VDC Measured at 25°C, VDD =3.3VDC, VC =1.65VDC Measured at 25°C, at Nominal VDD, at Nominal VC at 10Hz Offset at 100Hz Offset at 1kHz Offset at 10kHz Offset at 100kHz Offset 1.544MHz to 44.736MHz See Table 1 -55°C to 125°C 3.3VDC ±5% 15mA Maximum < 20.000MHz 25mA Maximum > 20.000MHz ±1.0ppm (at Nominal VDD and VC , at 25°C) See Table 1 (at Nominal VDD and VC ) ±0.3ppm Maximum ±0.2ppm Maximum ±1ppm / year Maximum 90% of VDD Minimum 10% of VDD Maximum 6 nSeconds Maximum 50 ±5(%) 15pF HCMOS Load Maximum 0.0VDC to VDD 1.65VDC ±1.35VDC ±7ppm Minimum, ±20ppm Maximum ±10% Maximum ±3ppm Minimum (Top Access) 10kOhms Typical -70dBc/Hz Typical -100dBc/Hz Typical -130dBc/Hz Typical -140dBc/Hz Typical -145dBc/Hz Typical MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EB52F5 14-PIN DIP 3.3V OS3B 06/04 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EB52F5 G 15 A V - 12.800M - G INITIAL TOLERANCE G=±1.0ppm Maximum AVAILABLE OPTIONS Blank=None (Standard) CB=Cut Leads to 2.540 ±0.500 (0.100” ±0.020”) CC=Cut Leads to 3.175 ±0.500 (0.125” ±0.020”) CD=Cut Leads to 3.810 ±0.500 (0.150” ±0.020”) CE=Cut Leads to 4.445 ±0.500 (0.175” ±0.020”) G=Full Size Gull Wing FREQUENCY STABILITY Two Digit Code Per Table 1 OPERATING TEMP. RANGE One Letter Code Per Table 1 FREQUENCY EXTERNAL TRIM N=None (No Connection on Pin 1) V=Voltage Control on Pin 1 MARKING SPECIFICATIONS MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS Line 1: ECLIPTEK Line 2: XX.XXX M M=MHz Frequency (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Pin 1: Voltage Control or No Connect Pin 7: Case Ground Pin 8: Output Pin 14: Supply Voltage Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Characteristic Specification Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A (Internal Crystal Only) MIL-STD-883, Method 1014, Condition C (Internal Crystal Only) MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EB52F5 14 pin DIP 3.3V OS3B 06/04 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.