Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead (Array) Data Sheet 1 EMIFILr (Inductor type) Chip Ferrite Bead (Array) BLA2AA/BLA2AB Series (0804 Size) c Dimensions c Equivalent Circuit (3) (4) 1.0±0.2 (2) 0.2±0.15 (1) (5) (6) (7) (1) (2) (3) (4) (5) (6) (7) (8) (8) 0.5±0.1 2.0±0.2 0.25±0.15 0.5±0.1 No polarity. : Electrode (in mm) c Packaging Code Packaging Minimum Quantity D 180mm Paper Tape 10000 J 330mm Paper Tape 50000 B Bulk(Bag) 1000 c Rated Value (p: packaging code) Impedance (at 100MHz/20°C) Impedance (at 1GHz/20°C) Rated Current DC Resistance Operating Temperature Range BLA2AAG121SN4p 120ohm ±25% - 100mA 0.50ohm max. -55 to +125°C BLA2AAG221SN4p 220ohm ±25% - 50mA 0.70ohm max. -55 to +125°C BLA2AAG601SN4p 600ohm ±25% - 50mA 1.10ohm max. -55 to +125°C BLA2AAG102SN4p 1000ohm ±25% - 50mA 1.30ohm max. -55 to +125°C BLA2ABD750SN4p 75ohm ±25% - 200mA 0.20ohm max. -55 to +125°C BLA2ABD121SN4p 120ohm ±25% - 200mA 0.35ohm max. -55 to +125°C BLA2ABD221SN4p 220ohm ±25% - 100mA 0.40ohm max. -55 to +125°C BLA2ABD471SN4p 470ohm ±25% - 100mA 0.65ohm max. -55 to +125°C BLA2ABD601SN4p 600ohm ±25% - 100mA 0.80ohm max. -55 to +125°C BLA2ABD102SN4p 1000ohm ±25% - 50mA 1.00ohm max. -55 to +125°C BLA2ABB100SN4p 10ohm ±25% - 200mA 0.1ohm max. -55 to +125°C BLA2ABB220SN4p 22ohm ±25% - 200mA 0.2ohm max. -55 to +125°C BLA2ABB470SN4p 47ohm ±25% - 200mA 0.35ohm max. -55 to +125°C BLA2ABB121SN4p 120ohm ±25% - 50mA 0.60ohm max. -55 to +125°C BLA2ABB221SN4p 220ohm ±25% - 50mA 0.90ohm max. -55 to +125°C Part Number Number of Circuits: 4 Continued on the following page. oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.9.6 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead (Array) Data Sheet 2 Continued from the preceding page. c Impedance-Frequency Characteristics (Main Items) c Impedance-Frequency Characteristics (Main Items) BLA2AAG Series BLA2ABD Series 1200 1600 BLA2ABD102SN4 BLA2AAG102SN4 1200 900 BLA2ABD601SN4 Impedance (Ω) Impedance (Ω) BLA2AAG601SN BLA2AAG221SN4 600 BLA2AAG121SN4 BLA2ABD471SN4 800 BLA2ABD221SN4 BLA2ABD121SN4 400 300 BLA2ABD750SN4 0 0 1 10 100 Frequency (MHz) 1000 3000 c Impedance-Frequency Characteristics (Main Items) 1 10 100 Frequency (MHz) 1000 3000 c Impedance-Frequency Characteristics BLA2ABB Series BLA2AAG121SN4 1000 200 BLA2ABB221SN4 160 Impedance (Ω) Impedance (Ω) 800 BLA2ABB121SN4 600 Z 120 R 80 X BLA2ABB470SN4 400 40 BLA2ABB220SN4 200 0 1 10 BLA2ABB100SN4 100 Frequency (MHz) 1000 3000 0 1 10 100 Frequency (MHz) 1000 c Impedance-Frequency Characteristics 3000 c Impedance-Frequency Characteristics BLA2AAG221SN4 BLA2AAG601SN4 400 1000 800 Z Impedance (Ω) Impedance (Ω) 300 R 200 X 100 Z 600 R 400 X 200 0 1 10 100 Frequency (MHz) 1000 0 3000 1 10 100 Frequency (MHz) 1000 3000 Continued on the following page. oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.9.6 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead (Array) Data Sheet 3 Continued from the preceding page. c Impedance-Frequency Characteristics c Impedance-Frequency Characteristics BLA2AAG102SN4 BLA2ABD750SN4 1250 200 Z 150 Impedance (Ω) Impedance (Ω) 1000 R 750 500 Z 100 R X 50 250 X 0 1 10 100 Frequency (MHz) 1000 0 3000 c Impedance-Frequency Characteristics 1 240 400 Impedance (Ω) Impedance (Ω) 500 Z R X 60 0 Z 300 R 200 X 1 10 100 Frequency (MHz) 1000 0 3000 1 10 100 Frequency (MHz) 1000 3000 c Impedance-Frequency Characteristics BLA2ABD471SN4 BLA2ABD601SN4 1000 800 Impedance (Ω) R 400 Z 800 Z 600 Impedance (Ω) 3000 100 c Impedance-Frequency Characteristics X 600 R 400 X 200 0 1000 BLA2ABD221SN4 300 120 100 Frequency (MHz) c Impedance-Frequency Characteristics BLA2ABD121SN4 180 10 200 1 10 100 Frequency (MHz) 1000 0 3000 1 10 100 Frequency (MHz) 1000 3000 Continued on the following page. oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.9.6 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead (Array) Data Sheet 4 Continued from the preceding page. c Impedance-Frequency Characteristics c Impedance-Frequency Characteristics BLA2ABD102SN4 BLA2ABB100SN4 50 1600 Z Impedance (Ω) Impedance (Ω) 40 Z 1200 R 800 X 20 X 400 0 R 30 10 1 10 100 Frequency (MHz) 1000 0 3000 c Impedance-Frequency Characteristics 1 1000 125 250 100 200 Z R 50 Z 150 R 100 X X 50 25 0 1 10 100 Frequency (MHz) 1000 0 3000 c Impedance-Frequency Characteristics 1 100 Frequency (MHz) 1000 3000 BLA2ABB221SN4 1000 600 800 Impedance (Ω) 450 Impedance (Ω) 10 c Impedance-Frequency Characteristics BLA2ABB121SN4 Z 300 R 150 0 3000 BLA2ABB470SN4 Impedance (Ω) Impedance (Ω) 100 Frequency (MHz) c Impedance-Frequency Characteristics BLA2ABB220SN4 75 10 X 1 10 100 Frequency (MHz) Z 600 R 400 X 200 1000 0 3000 1 10 100 Frequency (MHz) 1000 3000 Continued on the following page. oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.9.6 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead (Array) Data Sheet 5 Continued from the preceding page. c !Caution/Notice !Caution (Rating) Do not use products beyond the rated current as this may create excessive heat and deteriorate the insulation resistance. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.9.6 http://www.murata.com/