XPower Part Number: AAD1-9090QB11ZC/3-S PRELIMINARY SPEC ATTENTION Blue OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features ● SUPER HIGH FLUX OUTPUT AND HIGH LUMINANCE. ● DESIGNED FOR HIGH CURRENT OPERATION. ● LOW THERMAL RESISTANCE. ● LOW VOLTAGE DC OPERATED. ● SUPERIOR ESD PROTECTION. ● NOT REFLOW COMPATIBLE. ● THE COMPONENT IS INTERNALLY PROTECTED WITH SILICONE GEL. Applications z traffic signaling. ● RoHS COMPLIANT. z backlighting (illuminated advertising , general lighting). z interior and exterior automotive lighting. z substitution of micro incandescent lamps. z portable light source (e.g. bicycle flashlight). Application Note z signal and symbol luminaire for orientation. Static electricity and surge damage the LEDS. z marker lights (e.g. steps, exit ways, etc). It is recommended to use a wrist band or anti-electrostatic z decorative and entertainment lighting. glove when handling the LEDs. z indoor and outdoor commercial and residential All devices, equipment and machinery must be electrically architectural lighting. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAI0853 REV NO: V.1 DATE: JAN/28/2008 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 1 OF 5 ERP:1108000350 Selection Guide Dice Part No. AAD1-9090QB11ZC/3-S luminous Intensity [2] Iv (cd)@ 700mA Lens Type BLUE (AlInGaN) WATER CLEAR Φv (lm) [2] @ 700mA Viewing Angle [1] Min. Typ. Min. Typ. 2θ1/2 6.7 10 20 35.7 100° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity / luminous flux: +/-15%. Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 3 W Junction temperature TJ 110 °C Operating Temperature Top -40 To +100 °C Storage Temperature Tstg -40 To +100 °C IF 700 mA IFM 1000 mA Rth j-slug 11 °C/W 8000 V DC Forward Current [1] Peak Forward Current [2] Thermal resistance [1] Electrostatic Discharge Threshold (HBM) Notes: 1.Metal Core PCB is mounted on the heat Fins. 2.1/10 Duty Cycle, 0.1ms Pulse Width. Electrical / Optical Characteristics at TA=25°C Parameter Symbol Value Unit Wavelength at peak emission [Typ.] IF=700mA λpeak 461 nm Dominant Wavelength IF=700mA [Typ.] λdom [1] 460 nm Spectral bandwidth at 50%ΦREL MAX IF=700mA [Typ.] Δλ 20 nm Forward Voltage IF=700mA [Min.] 3.5 Forward Voltage IF=700mA [Typ.] Forward Voltage VF [2] IF=700mA [Max.] 3.9 V 4.3 Temperature coefficient of λpeak IF=700mA, -10°C≤ T≤100°C [Typ.] TCλpeak 0.04 nm/ °C Temperature coefficient of λdom IF=700mA, -10°C≤ T≤100°C [Typ.] TCλdom 0.03 nm/ °C Temperature coefficient of VF IF=700mA, -10°C≤ T≤100°C [Typ.] TCV -4.3 mV/ °C Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. SPEC NO: DSAI0853 REV NO: V.1 DATE: JAN/28/2008 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 2 OF 5 ERP:1108000350 AAD1-9090QB11ZC/3-S SPEC NO: DSAI0853 REV NO: V.1 DATE: JAN/28/2008 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 3 OF 5 ERP:1108000350 AAD1-9090QB11ZC/3-S SPEC NO: DSAI0853 REV NO: V.1 DATE: JAN/28/2008 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 4 OF 5 ERP:1108000350 PACKING & LABEL SPECIFICATIONS AAD1-9090QB11ZC/3-S SPEC NO: DSAI0853 REV NO: V.1 DATE: JAN/28/2008 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 5 OF 5 ERP:1108000350