CLINCH RIVETS Specifications: s Material: Rivet; Nylon 6/6, Mandrel; Polycarbonate s Color: Black; Mandrel: Clear CR Expansion Blind Rivet Features: s Set without the need for access to back of panel s Set by pulling the mandrel head into the rivet body, expanding the rivet body and causing it to flare against the reverse side s When sufficient force is applied, the mandrel will snap at its break point s Installed with a pop rivet installation tool (not offered) Item No. Hole Ø CR32-1-1 CR32-2-1 CR32-3-1 CR40-1-1 CR40-2-1 CR40-3-1 CR48-1-1 CR48-2-1 CR48-3-1 CR56-1-1 CR56-2-1 CR56-3-1 SLP Series Snap Lock Pin .050 (1.3) Ø.210 (5.2) .008 Ref. (0.2) .13 .13 .13 .16 .16 .16 .19 .19 .19 .22 .22 .22 Panel Thickness (3.3) .04 - .16 (1 - 4) (3.3) .16 - .28 (4 - 7) (3.3) .28 - .39 (7 - 10) (4.1) .04 - .16 (1 - 4) (4.1) .16 - .28 (4 - 7) (4.1) .28 - .39 (7 - 10) (4.9) .06 - .20 (1.5 - 5) (4.9) .20 - .31 (5 - 8) (4.9) .31 - .43 (8 - 11) (5.7) .08 - .22 (2 - 5.5) (5.7) .22 - .33 (5.5 - 8.5) (5.7) .33 - .47 (8.5 - 12) .050 (1.3) Ø.210 (5.2) Ø “D” “L” Ø“H” “T” .13 (3.2) .13 (3.2) .13 (3.2) .16 (4) .16 (4) .16 (4) .19 (4.8) .19 (4.8) .19 (4.8) .22 (5.6) .22 (5.6) .22 (5.6) .25 (6.4) .38 (9.6) .50 (12.7) .25 (6.4) .38 (9.6) .50 (12.7) .31 (8) .44 (11.2) .57 (14.4) .38 (9.6) .50 (12.7) .63 (15.9) .25 (6.4) .25 (6.4) .25 (6.4) .31 (8) .31 (8) .31 (8) .38 (9.6) .38 (9.6) .38 (9.6) .47 (12) .47 (12) .47 (12) .06 (1.4) .06 (1.4) .06 (1.4) .07 (1.8) .07 (1.8) .07 (1.8) .08 (2) .08 (2) .08 (2) .09 (2.2) .09 (2.2) .09 (2.2) Specifications: s Material: Nylon 6/6 s Color: Natural .070 Ref. (1.9) Type 2 Type 1 1,000 1,000 1,000 1,000 1,000 1,000 500 500 500 500 500 500 A .080 Ref. (2.0) .080 Ref. (2.0) (2.1) (2.1) (2.1) (2.4) (2.4) (2.4) (2.8) (2.8) (2.8) (3.4) (3.4) (3.4) 0.050 (1.3) Ø.210 (5.2) A A Pack Qty. Ø “A” .08 .08 .08 .09 .09 .09 .11 .11 .11 .13 .13 .13 Type 3 Item No. Hole Dia. Panel Thickness Head Dia. Head Thickness A Type 1 Type 2 Type 3 in mm in mm in mm in mm Pack Qty. SLP100-177-01 SLP100-221-01 SLP100-236-01 SLP100-245-01 SLP100-307-01 SLP100-316-01 SLP100-330-01 SLP100-413-01 SLP100-638-01 — SLP-1-177-01 SLP-1-221-01 SLP-1-236-01 SLP-1-245-01 SLP-1-307-01 SLP-1-316-01 SLP-1-330-01 SLP-1-413-01 SLP-1-638-01 SLP125-187-01 SLP-2-177-01 SLP-2-221-01 SLP-2-236-01 SLP-2-245-01 SLP-2-307-01 SLP-2-316-01 SLP-2-330-01 SLP-2-413-01 SLP-2-638-01 — 0.098 0.098 0.098 0.098 0.098 0.098 0.098 0.098 0.098 0.125 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3.2 0.177 0.221 0.236 0.245 0.307 0.316 0.33 0.413 0.638 0.187 4.5 5.6 6.0 6.2 7.8 8.0 8.4 10.5 16.2 4.7 0.210 0.210 0.210 0.210 0.210 0.210 0.210 0.210 0.210 0.200 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.1 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 SLPA Series Snap Lock Pin with Arrowhead Ø13/64 (5.2) 3/64 (1.2) Specifications: s Material: Nylon 6/6 s Color: Natural s Flame Class: UL94V-2 Hole Dia. A 5/32 (4.0) A Item No. In mm in mm Pack Qty. SLPA125-187-01 SLPA125-250-01 SLPA125-312-01 SLPA125-375-01 SLPA125-500-01 SLPA125-625-01 SLPA125-750-01 0.125 0.125 0.125 0.125 0.125 0.125 0.125 3.2 3.2 3.2 3.2 3.2 3.2 3.2 0.187 0.250 0.312 0.375 0.500 0.625 0.750 4.7 6.4 7.9 9.5 12.7 15.9 19.1 1,000 1,000 1,000 1,000 1,000 1,000 1,000 HSR Heat Sink Spring Mount Rivet Specifications: s Material: UL94 V-2 Nylon 6/6 s Color: Natural Features: s Fastens a heat sink to a processor chip on a PCB s The spring provides continuous pressure to the heat sink until thermal adhesive cures s HSR-2 can be installed by using a phillips head screwdriver HSR-1 HSR-2 Item No. Heat Sink Hole Ø PCB Hole Ø Spring Material Pack Qty. HSR-1 HSR-2 .125 - .157 (3.18 - 4) .120 - .140 (3.05 - 3.5) .118 (3) .122 (3.1) Spring Steel, Chrome Plating Stainless Steel 1,000 1,000 737