Aluminum Electrolytic Capacitors/ HB Long life Surface Mount Type Series: HB HB V Type: 앖 HA ■ Features ● ● ● ● 5.5 mm max. Low profile Endurance: 105 °C 2000 h 5.8 mm height (< φ6.3), 5.5 mm height max. Vibration-proof product is available upon request.(φ8 <) RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance –40 °C to +105 °C 4 V.DC to 50 V.DC 0.1 µF to 470 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Bi-polar I=0.02 CV or 6 (µA) after 2 minutes) DC Leakage Current tan δ W.V. (V) Z(–25 °C)/Z(+20 °C) Z(–40 °C)/Z(+20 °C) Characteristics at Low Temperature 4 7 15 (Whichever is greater) Please see the attached standard products list 6.3 10 16 25 35 50 4 3 2 2 2 2 (Impedance ratio at 120 Hz) 8 6 4 4 3 3 After applying rated working voltage for 2000 hours (Bi-polar : 1000 hours for each polarity) at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Endurance Capacitance change ±20 % of inisial measured value (4 W.V. : ±35 %±6.3 W.V. : ±25 % φ4 to φ6.3), 5.5 mm max. : ±25 % tan δ < 200 % of initial specified value DC leakage current < initial specified value Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Resistance to Soldering Heat After reflow soldering Capacitance change tan δ DC leakage current and then being stabilized at +20°C, capacitors shall meet the following limits. ±10 % of initial measured value < initial specified value < initial specified value ■ Marking ■ Dimensions in mm (not to scale) g HB Lot number Rated Voltage Mark g 4V j 6.3 V A 10 V C 16 V E 25 V V 35 V H 50 V Series identification (HP : Bi-polar) (BS : 5.5 mm max.) + L +0.1 –0.2 ✽L±0.3 K ( )reference size (P) B±0.2 H Capacitance (µF) φD±0.5 47 Negative polarity marking (–) (No marking for the bi-polar) A±0.2 – W (I) 0.3 max. Rated Voltage Mark (I) Example:4 V 47 µF Marking color: BLACK Mark for Lead-Free Products Black Dot (Square) (mm) Size code B C D E F G D 4.0 5.0 6.3 8.0 8.0 10.0 L 5.8 5.8 5.8 6.2 10.2 10.2 A,B 4.3 5.3 6.6 8.3 8.3 10.3 H max. 5.5 6.5 7.8 9.5 10.0 12.0 I 1.8 2.2 2.6 3.4 3.4 3.5 W 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 P 1.0 1.5 1.8 2.2 3.1 4.6 K 0.35–0.20 0.35–0.20 0.35–0.20 0.35–0.20 0.70±0.2 0.70±0.2 Size code ✽B ✽C ✽D D 4.0 5.0 6.3 L 5.4 5.4 5.4 A,B 4.3 5.3 6.6 H max. 5.5 6.5 7.8 I 1.8 2.2 2.6 W 0.65±0.1 0.65±0.1 0.65±0.1 P 1.0 1.5 1.8 K 0.35–0.20 to +0.15 0.35–0.20 to +0.15 0.35–0.20 to +0.15 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EE44 – to to to to +0.15 +0.15 +0.15 +0.15 01 Nov. 2009 Aluminum Electrolytic Capacitors/ HB ■ Standard Products Endurance : 105 °C 2000 h Case size W.V. (V) 4 6.3 10 16 25 35 50 Cap. (±20 %) (µF) 47 100 150 220 22 33 47 100 220 330 33 100 220 470 10 22 47 100 220 330 4.7 6.8 33 47 100 220 10 22 33 47 100 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 6.8 10 22 33 47 Dia. Length (mm) 4 5 6.3 6.3 4 4 5 6.3 8 8 5 8 8 10 4 5 6.3 8 10 10 4 4 6.3 8 8 10 5 6.3 8 8 10 4 4 4 4 4 4 4 5 5 6.3 8 8 10 (mm) 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 10.2 10.2 5.8 6.2 10.2 10.2 5.8 5.8 5.8 10.2 10.2 10.2 5.8 5.8 5.8 6.2 10.2 10.2 5.8 5.8 6.2 10.2 10.2 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 6.2 10.2 10.2 Min. Packaging Q'ty Specification Size Code B C D D B B C D F F C E F G B C D F G G B B D E F G C D E F G B B B B B B B C C D E F G Ripple tan δ Current (120 Hz) (120 Hz) (+105 °C) (+20 °C) (mA r.m.s.) 34 0.50 61 0.50 82 0.50 82 0.50 26 0.30 29 0.30 46 0.30 71 0.30 150 0.35 230 0.35 43 0.22 110 0.26 160 0.26 270 0.26 28 0.16 39 0.16 70 0.16 120 0.20 210 0.20 230 0.20 22 0.14 25 0.14 65 0.14 91 0.16 130 0.16 190 0.16 28 0.12 55 0.12 84 0.14 98 0.14 160 0.14 1 0.12 2 0.12 3 0.12 5 0.12 10 0.12 16 0.12 16 0.12 23 0.12 23 0.12 35 0.12 70 0.12 91 0.12 100 0.12 Part No. (RoHS:compliant) EEEHB0G470R EEEHB0G101R EEEHB0G151P EEEHB0G221P EEEHB0J220R EEEHB0J330R EEEHB0J470R EEEHB0J101P EEEHB0J221P EEEHB0J331P EEEHB1A330R EEEHB1A101P EEEHB1A221P EEEHB1A471P EEEHB1C100R EEEHB1C220R EEEHB1C470P EEEHB1C101P EEEHB1C221P EEEHB1C331P EEEHB1E4R7R EEEHB1E6R8R EEEHB1E330P EEEHB1E470P EEEHB1E101P EEEHB1E221P EEEHB1V100R EEEHB1V220P EEEHB1V330P EEEHB1V470P EEEHB1V101P EEEHB1HR10R EEEHB1HR22R EEEHB1HR33R EEEHB1HR47R EEEHB1H1R0R EEEHB1H2R2R EEEHB1H3R3R EEEHB1H4R7R EEEHB1H6R8R EEEHB1H100P EEEHB1H220P EEEHB1H330P EEEHB1H470P Reflow (1) (1) (1) (1) (1) (1) (1) (1) (2) (2) (1) (2) (2) (2) (1) (1) (1) (2) (2) (2) (1) (1) (1) (2) (2) (2) (1) (1) (2) (2) (2) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) Taping (pcs) 2000 1000 1000 1000 2000 2000 1000 1000 500 500 1000 1000 500 500 2000 1000 1000 500 500 500 2000 2000 1000 1000 500 500 1000 1000 1000 500 500 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 1000 500 500 The taping dimensions are explained on p.177 of our Catalog. Please use it as a reference guide. Reflow Profile(Fig-1 to Fig-6) listed on p.175 of our Catalog. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EE45 – 01 Nov. 2009 Aluminum Electrolytic Capacitors/ HB ■ Standard Products (Bi-polar) Endurance : 105 °C 2000 h Case size W.V. (V) 6.3 10 16 25 35 50 Cap. (±20 %) (µF) 47 10 33 10 3.3 4.7 10 22 2.2 0.22 0.33 0.47 1 3.3 4.7 Dia. Length (mm) 6.3 4 6.3 5 4 4 6.3 6.3 4 4 4 4 4 6.3 6.3 (mm) 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 Min. Packaging Q'ty Specification Size Code D B D C B B D D B B B B B D D Ripple tan δ Current (120 Hz) (120 Hz) (+105°C) (+20 °C) (mA r.m.s.) 35 0.60 20 0.44 26 0.44 25 0.32 12 0.28 12 0.28 28 0.28 55 0.28 10 0.24 2 0.24 3 0.24 5 0.24 10 0.24 16 0.24 23 0.24 Part No. (RoHS:compliant) EEEHP0J470P EEEHP1A100R EEEHP1A330P EEEHP1C100R EEEHP1E3R3R EEEHP1E4R7R EEEHP1E100P EEEHP1E220P EEEHP1V2R2R EEEHP1HR22R EEEHP1HR33R EEEHP1HR47R EEEHP1H1R0R EEEHP1H3R3P EEEHP1H4R7P ■ Standard Products (5.5 mm max.) (V) 6.3 10 16 25 35 50 Cap. (±20 %) (µF) 22 47 100 33 10 22 47 4.7 6.8 33 10 22 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 6.8 10 Dia. Length (mm) 4 5 6.3 5 4 5 6.3 4 4 6.3 5 6.3 4 4 4 4 4 4 4 5 5 6.3 (mm) 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 Taping (pcs) 1000 2000 1000 1000 2000 2000 1000 1000 2000 2000 2000 2000 2000 1000 1000 (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) Endurance : 105 °C 2000 h Case size W.V. Reflow Min. Packaging Q'ty Specification Size Code B C D C B C D B B D C D B B B B B B B C C D Ripple tan δ Current (120 Hz) (120 Hz) (+105°C) (+20 °C) (mA r.m.s.) 26 0.30 46 0.30 71 0.30 43 0.22 28 0.16 39 0.16 70 0.16 22 0.14 25 0.14 65 0.14 28 0.12 55 0.12 1 0.12 2 0.12 3 0.12 5 0.12 10 0.12 16 0.12 16 0.12 23 0.12 23 0.12 35 0.12 Part No. (RoHS:compliant) EEEHB0J220SR EEEHB0J470SR EEEHB0J101SP EEEHB1A330SR EEEHB1C100SR EEEHB1C220SR EEEHB1C470SP EEEHB1E4R7SR EEEHB1E6R8SR EEEHB1E330SP EEEHB1V100SR EEEHB1V220SP EEEHB1HR10SR EEEHB1HR22SR EEEHB1HR33SR EEEHB1HR47SR EEEHB1H1R0SR EEEHB1H2R2SR EEEHB1H3R3SR EEEHB1H4R7SR EEEHB1H6R8SR EEEHB1H100SP Reflow (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) Taping (pcs) 2000 1000 1000 1000 2000 1000 1000 2000 2000 1000 1000 1000 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 The taping dimensions are explained on p.177 of our Catalog. Please use it as a reference guide. Reflow Profile(Fig-1 to Fig-6) listed on p.175 of our Catalog. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EE46 – 01 Nov. 2009