BC846U NPN Silicon Transistor Descriptions PIN Connection • General purpose application • Switching application 3 Features • High Voltage : VCEO=55V • Complementary pair with BC856U 1 2 Ordering Information SOT-323 Type NO. Marking Package Code AS □ □ ① ② ③ BC846U SOT-323 ①Device Code ②hFE Rank ③Year&Week Code Absolute maximum ratings (Ta=25°C) Characteristic Symbol Ratings Unit Collector-Base voltage VCBO 80 V Collector-Emitter voltage VCEO 55 V Emitter-Base voltage VEBO 5 V Collector current IC 100 mA Collector dissipation PC 200 mW Junction temperature Tj 150 °C Storage temperature Tstg -55~150 °C Electrical Characteristics (Ta=25°C) Characteristic Symbol Collector-Emitter breakdown voltage BVCEO IC=1mA, IB=0 Base-Emitter turn on voltage VBE(ON) VCE=5V, IC=2mA Base-Emitter saturation voltage VBE(sat) Collector-Emitter saturation voltage VCE(sat) Collector cut-off current DC current gain Transition frequency ICBO * hFE fT Test Condition Min. Typ. Max. Unit 55 - - V 550 - 700 mV IC=100mA, IB=5mA - 900 - mV IC=100mA, IB=5mA - - 600 mV VCB=35V, IE=0 - - 15 nA 110 - 800 - VCE=5V, IC=10mA - 150 - MHz VCE=5V, IC=2mA Collector output capacitance Cob VCB=10V, IE=0, f=1MHz - - 4.5 pF Noise figure NF VCE=5V, IC=200μA, f=1KHz, Rg=2KΩ - - 10 dB * : hFE rank / A : 110 ~ 220, B : 200 ~ 450, C : 420 ~ 800 KSD-T5D029-000 1 BC846U Electrical Characteristic Curves Fig. 2 IC -VBE Fig. 1 PC –Ta Fig. 3 IC -VCE Fig. 4 hFE -IC Fig. 5 VCE(sat) -IC KSD-T5D029-000 2 BC846U Outline Dimension ※Recommend PCB solder land [Unit: mm] KSD-T5D029-000 3 BC846U The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T5D029-000 4