Emboss Tape ZH CONNECTOR 1.5mm pitch/Disconnectable Crimp style connectors Specifications ––––––––––––––––––– The ZH connector is very small with a mounting height of 5.6mm and a thickness of only 3.5mm. Contact retention lances on the housing make insertion easier, while the dimple at the center of the contact ensures reliable contact with the post. • Compact, low profile design • Housing lances • Reliable contact construction • Distortion resistant construction • Compatible with the ZR insulation displacement connectors • Current rating: 1.0A AC, DC (AWG #26) • Voltage rating: 50V AC, DC • Temperature range: -25˚C to +85˚C (including temperature rise in applying electrical current) • Contact resistance: Initial value/20m Ω max. After environmental testing/30m Ω max. • Insulation resistance: 500M Ω min. • Withstanding voltage: 500V AC/minute • Applicable wire: AWG #32 to #26 • Applicable PC board thickness: 0.6 to 1.2mm,1.6mm * RoHS compliant products are published. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards –––––––––––––––––––––– 0 Recognized E60389 1 Certified LR20812 2 R9351092 PC board layout and Assembly layout 〈Through-hole type (viewed from soldering side) 〉 Top entry type Side entry type 1.5 ±0.05 1.5 min 1.5 ±0.05 1.5 min 3.5 2.7 3.7 （3.4） 5.6 4.6 min 2.2 min 7.1 2.7 （3.4） φ0.7 ±0.03 4.6 φ0.7 ±0.03 Note: 1. Tolerances are non-cumulative: ±0.05mm for all centers. 2. Hole dimension differ according to the kind of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions should be larger. The dimensions above should serve as a guideline. Contact JST for details. 〈SMT type (viewed from component side) 〉 SM2 type Side entry type SM4 type Top entry type Side entry type ±0.1 1.5 ±0.05 1.3 1.5 ±0.1 ±0.1 1.5 ±0.05 1.4 1.1 ±0.1 0.7 min Note: 1. N...Number of circuits 2. Tolerances are non-cumulative: ±0.05mm for all centers. 3. The dimensions above should serve as a guideline. Contact JST for details. 16 1.9 ±0.1 1.4 ±0.1 2.3 ±0.1 2.5 max φ1.1 ＋0.1 0 0.7 min 4.3 0.9 ±0.05 0.6 ±0.05 2.0 0.7min 1.5 2.0 min 1.5× (N-1)＋0.9 ZH CONNECTOR Contact 4.0 Model No. 2.2 0.5 1.0 1.4 1.1 Applicable wire AWG# Insulation O.D. (mm) mm2 SZH-002T-P0.5 SZH-003T-P0.5 Q'ty / reel 0.08 〜0.13 28〜26 0.8〜1.1 13,000 0.032〜0.08 32〜28 0.5〜0.9 16,000 1.5 Material and Finish Phosphor bronze, tin-plated (reflow treatment) 0.3 RoHS compliance Applicator Dies Crimp applicator with dies MKS-L MK/SZH-002-05 APLMK SZH002-05 ― ― ― Crimping machine Crimp applicator Contact SZH-002T-P0.5 AP-K2N Applicator Dies Crimp applicator with dies MKS-L MK/SZH-003-05 APLMK SZH003-05 *MKS-SC SC/SZH-003-05 APLSC SZH003-05 Crimping machine Crimp applicator Contact SZH-003T-P0.5 AP-K2N Note: *Strip-crimp applicator. Housing B 1.5 Circuits Model No. 2 ZHR-2 ZHR-3 ZHR-4 ZHR-5 ZHR-6 ZHR-6(3.0) ZHR-7 ZHR-8 ZHR-9 ZHR-10 ZHR-11 ZHR-12 ZHR-13 3 3.4 4 A 1.5 0.3 5 6 6 6 5 3 2 1 4.2 7 8 9 0.3 10 11 12 13 <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. A Dimensions (mm) B Q'ty / bag 1.5 4.5 1,000 3.0 6.0 1,000 4.5 7.5 1,000 6.0 9.0 1,000 7.5 10.5 1,000 15.0 18.0 1,000 9.0 12.0 1,000 10.5 13.5 1,000 12.0 15.0 1,000 13.5 16.5 1,000 15.0 18.0 1,000 16.5 19.5 1,000 18.0 21.0 1,000 Material PA 66, UL94V-0, natural (white) RoHS compliance Note: 1. ZHR-6(3.0) is 6 circuits 3.0mm pitch plugged up. As for this housing, only circuit No.1 is marked. 2. ZHR-6(3.0) is not UL/CSA/TÜV approved. ZHR-2-oo(blank)…natural (white) K…black R…red E…blue M…green Through-hole type shrouded header Circuits Top entry type (2 circuits) B (3 circuits or more) B 3.5 2 3.5 3 4.5 4.5 4 5 6 φ0.5 2.7 Note) 3.4 2.2 2.7 Note) 3.4 7 A 1.5 1.5 A 1.5 2.2 8 9 10 11 12 Side entry type 13 B B2B-ZR B3B-ZR B4B-ZR B5B-ZR B6B-ZR B7B-ZR B8B-ZR B9B-ZR B10B-ZR B11B-ZR B12B-ZR B13B-ZR Side entry type Note) Note) Top entry type S2B-ZR S3B-ZR S4B-ZR S5B-ZR S6B-ZR S7B-ZR S8B-ZR S9B-ZR S10B-ZR S11B-ZR S12B-ZR S13B-ZR B2B-ZR-3.4 B3B-ZR-3.4 B4B-ZR-3.4 B5B-ZR-3.4 B6B-ZR-3.4 B7B-ZR-3.4 B8B-ZR-3.4 B9B-ZR-3.4 B10B-ZR-3.4 B11B-ZR-3.4 B12B-ZR-3.4 B13B-ZR-3.4 Q'ty / box Top entry Side entry Side entry type type type-3.4 Side entry type A B S2B-ZR-3.4 S3B-ZR-3.4 S4B-ZR-3.4 S5B-ZR-3.4 S6B-ZR-3.4 S7B-ZR-3.4 S8B-ZR-3.4 S9B-ZR-3.4 S10B-ZR-3.4 S11B-ZR-3.4 S12B-ZR-3.4 S13B-ZR-3.4 1.5 4.5 2,000 2,000 2,000 3.0 6.0 2,000 2,000 1,000 4.5 7.5 2,000 2,000 2,000 6.0 9.0 2,000 1,000 1,000 7.5 10.5 2,000 1,000 1,000 9.0 12.0 1,000 1,000 1,000 10.5 13.5 1,000 1,000 1,000 12.0 15.0 1,000 1,000 1,000 13.5 16.5 1,000 1,000 1,000 15.0 18.0 1,000 500 500 16.5 19.5 1,000 500 500 18.0 21.0 500 500 500 1.5 1.5 4.6 1.4 2.7 Note) 3.4 2.4 3.7 Material and Finish H JST φ0.5 A Dimensions (mm) Model No. Top entry type Pin: Brass, copper-undercoated, tin-plated (reflow treatment) Wafer: Glass-filled PA 66, UL94V-0, natural (ivory) RoHS compliance This product displays (LF)(SN) on a label. Note: Headers with 3.4mm long solder tails, suited for the 1.6mm thick PC board. <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. B2B-ZR-3.4-oo(blank)…natural (ivory) K…black R…red E…blue M…green 17 ZH CONNECTOR SMT type shrouded header SM2 type SM2 type Side entry type Model No. Side entry type S2B-ZR-SM2-TF S3B-ZR-SM2-TF S4B-ZR-SM2-TF S5B-ZR-SM2-TF S6B-ZR-SM2-TF S7B-ZR-SM2-TF S8B-ZR-SM2-TF S9B-ZR-SM2-TF S10B-ZR-SM2-TF S11B-ZR-SM2-TF S12B-ZR-SM2-TF S13B-ZR-SM2-TF Circuits 2 3 4 5 B A 5.0 1.5 1.5 1.0 1.5 6 7 8 3.7 9 10 HJST 1.5 11 12 φ1.0 0.9 13 Dimensions (mm) A B Q'ty / reel 1.5 4.5 1,000 3.0 6.0 1,000 4.5 7.5 1,000 6.0 9.0 1,000 7.5 10.5 1,000 9.0 12.0 1,000 10.5 13.5 1,000 12.0 15.0 1,000 13.5 16.5 1,000 15.0 18.0 1,000 16.5 19.5 1,000 18.0 21.0 1,000 Material and Finish Pin: Brass, copper-undercoated, tin-plated (reflow treatment) Wafer: Glass-filled PA 46, UL94V-0, natural (ivory) RoHS compliance This product displays (LF)(SN) on a label. SM4 type SM4 type (with solder tabs) Top entry type B A Model No. 2 2.25 3 5.0 1.5 4 3.7 5 6 HJST 7 1.5 8 9 Side entry type 10 11 B A Dimensions (mm) Circuits 5.0 2.25 1.5 1.5 1.0 12 13 Q'ty / reel Top entry Side entry type type Top entry type Side entry type A B B2B-ZR-SM4-TF B3B-ZR-SM4-TF B4B-ZR-SM4-TF B5B-ZR-SM4-TF B6B-ZR-SM4-TF B7B-ZR-SM4-TF B8B-ZR-SM4-TF B9B-ZR-SM4-TF B10B-ZR-SM4-TF B11B-ZR-SM4-TF B12B-ZR-SM4-TF B13B-ZR-SM4-TF S2B-ZR-SM4A-TF S3B-ZR-SM4A-TF S4B-ZR-SM4A-TF S5B-ZR-SM4A-TF S6B-ZR-SM4A-TF S7B-ZR-SM4A-TF S8B-ZR-SM4A-TF S9B-ZR-SM4A-TF S10B-ZR-SM4A-TF S11B-ZR-SM4A-TF S12B-ZR-SM4A-TF S13B-ZR-SM4A-TF 1.5 6.0 1,000 1,000 3.0 7.5 1,000 1,000 4.5 9.0 1,000 1,000 6.0 10.5 1,000 1,000 7.5 12.0 1,000 1,000 9.0 13.5 1,000 1,000 10.5 15.0 1,000 1,000 12.0 16.5 1,000 1,000 13.5 18.0 1,000 1,000 15.0 19.5 1,000 1,000 16.5 21.0 1,000 1,000 18.0 22.5 1,000 1,000 3.7 Material and Finish Pin: Brass, copper-undercoated, tin-plated (reflow treatment) Wafer: PA 6T, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) HJST RoHS compliance This product displays (LF)(SN) on a label. Note: 1. The products listed above are supplied on embossed-tape. 2. Contact JST for the top entry type headers with suction cap. <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. 18 S2B-ZR-SM4A-oo-TF(blank)…natural (ivory) K…black R…red E…blue M…green ZH CONNECTOR Taping specifications –––––––––––––––––––––––––––––––––––––––––––––––––––––– Feeding direction φ330±2.0 Feeding direction Carrier tape Cover tape leader Leader part 100min. The end part Connector 400min. 160min. mounting part (φ13) W1+2.5 –1.0 2.0±0.5 SM2 type (Side entry type) 2 to 11 circuits SM4 type (Side entry type) 2 to 10 circuits Feeding direction φ1.55±0.05 4.0±0.1 2.0±0.1 φ1.55±0.05 1.75±0.1 Feeding direction 4.0±0.1 2.0±0.1 1.75±0.1 SM2 type (Side entry type) 12 to 13 circuits SM4 type (Side entry type) 11 to 13 circuits Cover tape F±0.1 F±0.1 W±0.3 (S) S±0.1 W±0.3 Cover tape Carrier tape Carrier tape 12.0±0.1 12.0±0.1 SM4 type (Top entry type) 2 to 10 circuits SM4 type (Top entry type) 11 to 13 circuits φ1.55±0.05 4.0±0.1 2.0±0.1 Cover tape F±0.1 (S) Carrier tape Carrier tape 12.0±0.1 12.0±0.1 Taping dimensions (mm) Circuits Reel dimensions (mm) Q'ty / reel F S W W1 Side SM2 entry 7 to 11 Type type 12 to 13 7.5 6.75 16.0 17.5 1,000 11.5 10.75 24.0 25.5 1,000 14.2 28.4 32.0 33.5 1,000 2 5.5 4.75 12.0 13.5 1,000 3 to 5 7.5 6.75 16.0 17.5 1,000 6 to 10 11.5 10.75 24.0 25.5 1,000 11 to 12 14.2 28.4 32.0 33.5 1,000 13 20.2 40.4 44.0 45.5 1,000 2 to 5 7.5 6.75 16.0 17.5 1,000 6 to 10 11.5 10.75 24.0 25.5 1,000 11 to 12 14.2 28.4 32.0 33.5 1,000 13 20.2 40.4 44.0 45.5 1,000 2 to 6 Top entry type SM4 Type Side entry type S±0.1 W±0.3 Cover tape F±0.1 W±0.3 4.0±0.1 2.0±0.1 1.75±0.1 φ1.55±0.05 1.75±0.1 Feeding direction Feeding direction Note: 1. Specifications conform to JIS C 0806. The tape width, connector recess dimensions, etc. are determined by the number of circuits and external shape of the connector to be loaded. 2. Specifications are subject to change without prior notice.