VISHAY V20100S_11

New Product
V20100S, VI20100S
Vishay General Semiconductor
High-Voltage Trench MOS Barrier Schottky Rectifier
Ultra Low VF = 0.446 V at IF = 5 A
FEATURES
TMBS®
TO-220AB
• Trench MOS Schottky technology
TO-262AA
• Low forward voltage drop, low power losses
K
• High efficiency operation
• Low thermal resistance
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• AEC-Q101 qualified
2
3
1
1
V20100S
PIN 1
PIN 2
PIN 3
CASE
2
3
VI20100S
PIN 1
PIN 2
PIN 3
K
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
• Halogen-free according to IEC 61249-2-21 definition
MECHANICAL DATA
PRIMARY CHARACTERISTICS
IF(AV)
20 A
VRRM
100 V
IFSM
250 A
VF at IF = 20 A
0.69 V
TJ max.
150 °C
Case: TO-220AB and TO-262AA
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS compliant, and
commercial grade
Base P/NHM3 - halogen-free, RoHS compliant, and
AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix
meets JESD 201 class 2 whisker test
TYPICAL APPLICATIONS
Polarity: As marked
For use in high frequency DC/DC converters, switching
power supplies, freewheeling diodes, OR-ing diode, and
reverse battery protection.
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
V20100S
VI20100S
UNIT
Maximum repetitive peak reverse voltage
VRRM
100
V
Maximum average forward rectified current (fig. 1)
IF(AV)
20
A
Peak forward surge current 8.3 ms single half sine-wave superimposed
on rated load
IFSM
250
A
dV/dt
10 000
V/μs
TJ, TSTG
- 40 to + 150
°C
Voltage rate of change (rated VR)
Operating junction and storage temperature range
Document Number: 89190
Revision: 25-Mar-11
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
V20100S, VI20100S
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
IF = 5 A
IF = 10 A
Maximum instantaneous forward voltage
TA = 25 °C
IF = 20 A
VF (1)
IF = 5 A
IF = 10 A
Reverse current
VR = 100 V
MAX.
0.51
-
TA = 125 °C
0.60
-
0.79
0.90
0.45
-
0.53
-
0.69
0.76
17
-
μA
TA = 25 °C
TA = 125 °C
TA = 25 °C
UNIT
V
IF = 20 A
VR = 70 V
TYP.
IR (2)
TA = 125 °C
7
-
mA
70
500
μA
14
30
mA
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width  40 ms
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise specified)
PARAMETER
SYMBOL
Typical thermal resistance
V20100S
VI20100S
2.0
RJC
UNIT
°C/W
ORDERING INFORMATION (Example)
PACKAGE
PREFERRED P/N
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
TO-220AB
V20100S-M3/4W
1.88
4W
50/tube
Tube
TO-262AA
V20100S-M3/4W
TO-220AB
TO-262AA
1.45
4W
50/tube
Tube
V20100SHM3/4W
(1)
1.88
4W
50/tube
Tube
V20100SHM3/4W
(1)
1.45
4W
50/tube
Tube
Note
(1) AEC-Q101 qualified
www.vishay.com
2
For technical questions within your region, please contact one of the following:
Document Number: 89190
[email protected], [email protected], [email protected]
Revision: 25-Mar-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
V20100S, VI20100S
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 C unless otherwise noted)
100
Instantaneous Reverse Current (mA)
24
Average Forward Current (A)
Resistive or Inductive Load
20
V20100S
VI20100S
16
12
8
4
0
TA = 150 °C
10
TA = 125 °C
1
0.1
TA = 25 °C
0.01
0.001
0
25
50
75
100
125
150
10
175
20
30
40
50
60
90
100
Fig. 1 - Maximum Forward Current Derating Curve
Fig. 4 - Typical Reverse Leakage Characteristics
10 000
D = 0.5
18
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
D = 0.8
16
D = 0.2
14
12
D = 1.0
D = 0.1
10
8
T
6
4
2
D = tp/T
tp
16
20
Junction Capacitance (pF)
D = 0.3
Average Power Loss (W)
80
Percent of Rated Peak Reverse Voltage (%)
20
0
1000
100
10
0
4
8
12
24
0.1
1
10
100
Average Forward Current (A)
Reverse Voltage (V)
Fig. 2 - Forward Power Loss Characteristics
Fig. 5 - Typical Junction Capacitance
100
10
Transient Thermal Impedance (°C/W)
Instantaneous Forward Current (A)
70
Case Temperature (°C)
TA = 150 °C
TA = 125 °C
10
TA = 25 °C
1
0.1
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
Junction to Case
1
0.1
0.01
V(I)20100S
0.001
0.01
0.1
1
10
100
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 6 - Typical Transient Thermal Impedance
Document Number: 89190
Revision: 25-Mar-11
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
3
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
V20100S, VI20100S
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-220AB
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.185 (4.70)
0.175 (4.44)
0.154 (3.91)
0.148 (3.74)
0.055 (1.39)
0.045 (1.14)
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
1
PIN
2
0.635 (16.13)
0.625 (15.87)
3
0.160 (4.06)
0.140 (3.56)
0.603 (15.32)
0.573 (14.55)
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.560 (14.22)
0.530 (13.46)
0.105 (2.67)
0.095 (2.41)
0.035 (0.90)
0.028 (0.70)
0.104 (2.65)
0.096 (2.45)
0.022 (0.56)
0.014 (0.36)
0.205 (5.20)
0.195 (4.95)
TO-262AA
0.185 (4.70)
0.175 (4.44)
0.411 (10.45) MAX.
30° (TYP.)
(REF.)
0.250 (6.35) MIN.
0.055 (1.40)
0.047 (1.19)
0.055 (1.40)
0.045 (1.14)
K
0.950 (24.13)
0.920 (23.37)
1
PIN
2
0.350 (8.89)
0.330 (8.38)
0.510 (12.95)
0.470 (11.94)
3
0.160 (4.06)
0.140 (3.56)
0.057 (1.45)
0.045 (1.14)
0.104 (2.65)
0.096 (2.45)
www.vishay.com
4
0.401 (10.19)
0.381 (9.68)
0.110 (2.79)
0.100 (2.54)
PIN 1
PIN 2
PIN 3
HEATSINK
0.035 (0.90)
0.028 (0.70)
0.560 (14.22)
0.530 (13.46)
0.022 (0.56)
0.014 (0.35)
0.205 (5.20)
0.195 (4.95)
For technical questions within your region, please contact one of the following:
Document Number: 89190
[email protected], [email protected], [email protected]
Revision: 25-Mar-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1