SMD Shielded Wire-wound Chip Inductors CT1008PS Series SPECIFICATIONS Please specify tolerance code when ordering. CT1008PS-102_ K = ±10%, M = ±20% CT1008PSF Please specify “F” for RoHS compliant *Inductance drop = 10% typ. at IDC From 1.0 µH to 1000 µH Part Number Not shown at actual size. RoHS Compliant Available CHARACTERISTICS Description: SMD shielded wire-wound chip inductor Applications: LC resonant circuits such as oscillator and signal generators, impedance matching, circuit isolation, RF filters, disk drives and computer peripherals, audio and video equipment, TV, radio and telecommunication equipment Operating Temperature: -40°C to +85°C Inductance Tolerance: ±10%, ±20% Testing: Inductance and Q tested on an HP4285A at specified frequency. Packaging: Tape & Reel Miscellaneous: RoHS Compliant available. Marking: Parts are marked with inductance code Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. Inductance (µH) L Test Freq. (kHz) Q Fact. Min. Q Test Freq. (MHz) SRF Typ. (MHz) DCR Max. Ω) (Ω *IDC Max. (A) CT1008PS_-102_ CT1008PS_-152_ CT1008PS_-182_ CT1008PS_-272_ CT1008PS_-392_ CT1008PS_-472_ CT1008PS_-562_ CT1008PS_-682_ 1.0 1.5 1.8 2.7 3.9 4.7 5.6 6.8 100 100 100 100 100 100 100 100 35 35 35 38 38 38 38 38 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 344 260 225 185 175 160 150 120 0.05 0.06 0.09 0.14 0.26 0.35 0.36 0.58 3.0 2.8 2.1 1.3 1.2 1.0 1.0 .84 CT1008PS_-103_ CT1008PS_-153_ CT1008PS_-223_ CT1008PS_-333_ CT1008PS_-393_ CT1008PS_-473_ CT1008PS_-683_ CT1008PS_-823_ 10 15 22 33 39 47 68 82 100 100 100 100 100 100 100 100 38 38 40 45 45 45 45 45 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 105 35 26 20 16 19 12 9.0 0.92 1.15 1.40 1.61 1.85 2.50 3.80 4.30 .78 .70 .65 .51 .45 .40 .31 .30 CT1008PS_-104_ CT1008PS_-124_ CT1008PS_-154_ CT1008PS_-224_ CT1008PS_-334_ CT1008PS_-474_ CT1008PS_-564_ CT1008PS_-684_ CT1008PS_-824_ 100 120 150 220 330 470 560 680 820 100 100 100 100 100 100 100 100 100 45 50 50 55 55 55 55 55 45 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 7.0 7.0 5.8 4.0 3.8 3.1 2.8 2.5 1.5 5.80 6.30 7.50 10.0 11.5 16.3 18.1 24.0 26.0 .30 .25 .22 .22 .20 .16 .13 .12 .10 CT1008PS_-105_ 1000 100 45 1.0 2.0 29.0 .10 PHYSICAL DIMENSIONS Size mm inches A B C Max. Max. Max. D E F G 3.81 3.81 0.15 0.15 2.74 1.78 2.54 2.11 0.51 0.11 0.07 0.10 0.08 0.02 PAD LAYOUT Technologies 04.05.05 CENTRAL ctparts.com Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2005 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice