SURFACE MOUNT DISPLAY PRELIMINARY SPEC Part Number: ACPSA04-41PBWA/A BLUE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description 0.4 INCH CHARACTER HEIGHT. The Blue source color devices are made with InGaN on SiC LOW CURRENT OPERATION. Light Emitting Diode. HIGH CONTRAST AND LIGHT OUTPUT. Static electricity and surge damage the LEDS. EASY MOUNTING ON P.C. BOARDS OR SOCKETS. It is recommended to use a wrist band or CATEGORIZED FOR LUMINOUS INTENSITY. anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically MECHANICALLY RUGGED. grounded. GRAY FACE,WHITE SEGMENT. PACKAGE : 400PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. 3.The gap between the reflector and PCB shall not exceed 0.25mm SPEC NO: DSAG4988 REV NO: V.1 DATE: MAY/30/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP: 1361000046 Selection Guide Part No. Dice ACPSA04-41PBWA/A Iv (ucd) [1] @ 10mA Lens Type BLUE (InGaN) WHITE DIFFUSED Description Min. Typ. 800 2900 Common Anode, Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD [1] Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.3 3.8 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 114 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG4988 REV NO: V.1 DATE: MAY/30/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP: 1361000046 Blue ACPSA04-41PBWA/A SPEC NO: DSAG4988 REV NO: V.1 DATE: MAY/30/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP: 1361000046 ACPSA04-41PBWA/A Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAG4988 REV NO: V.1 DATE: MAY/30/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP: 1361000046 PACKING & LABEL SPECIFICATIONS ACPSA04-41PBWA/A SPEC NO: DSAG4988 REV NO: V.1 DATE: MAY/30/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP: 1361000046