F18 Series • Industry Standard Package and Circuits • Power Control Building Blocks • Nine Circuits to Chose from AVAILABLE OPTIONS ELECTRICAL SPECIFICATIONS Description Symbol 27 42 57 92 Maximum DC Output Current (Tc = 85°C) ID 25 A 40 A 55 A 90 A 105 A Maximum Voltage Drop @ Amps Peak VF 1.55V @ 75 A 1.4V @ 120 A 1.4V @ 165 A 1.4V @ 270 A 1.65V @ 300 A -40 - 125°C Operating Junction Temperature Range 107 (2) TJ -40 - 125°C -40 - 125°C -40 - 125°C -40 - 125°C Critical Rate of Rise of On-State Current @ TJ=125°C [A/µs] di/dt 100 100 100 100 100 Critical Rate of Rise of Off-State Voltage [V/µs] dv/dt 1000 1000 1000 1000 1000 VRRM 400 (120 VAC) 600 (240 VAC) 800 (280 VAC) Maximum Non-Repetitive Surge Current (1/2 Cycle, 60 Hz) [A] ITSM 400 1000 1200 (480 VAC) 1400 (530 VAC) 1600 (600 VAC) 1500 1950 2250 Maximum I²T for Fusing (t=8.3ms) [A²sec] I2T 670 4150 9350 15800 25000 Minimum Required Gate Current to Trigger @ 25°C [mA] IGT 150 150 150 150 150 Minimum Required Gate Voltage to Trigger @ 25°C [V] VGT 3.0 3.0 3.0 3.0 3.0 PG(AV) 0.5 0.5 0.5 0.5 0.5 Maximum Peak Reverse Gate Voltage [V] VGM 5.0 5.0 5.0 5.0 5.0 Maximum Thermal Resistance, Junction to Ceramic Base per Chip [°C/W] Isolation Voltage [Vrms] RJC 0.4 0.28 0.25 0.14 0.135 VISOL 2500 2500 2500 2500 2500 Repetitive Peak Reverse Voltage (AC Line Nominal) [Vpk] Average Gate Power [W] GENERAL SPECIFICATIONS Description Weight (typical) Torque Required 4.75 oz (135g) Terminal Stud Screw : 30 in. lbs. Mounting Screws : 20 in. lbs. MECHANICAL SPECIFICATIONS CIRCUIT DIAGRAMS AGENCY APPROVALS Rev. 012109 ANNEX - ENVIROMENTAL INFORMATION