ETC2 CSF32E1 Hc-49/us smd microprocessor crystal Datasheet

C A L I B E R
C, CS, CR Series
Lead-Free
RoHS Compliant
Electronics Inc.
PART NUMBERING GUIDE
HC-49/US SMD Microprocessor Crystals
Environmental/Mechanical Specifications on page F5
C A 32 C 3 - 30.000MHz
Package
C =HC49/US SMD (4.50mm max. ht.)
CS=HC49/US SMD (3.50mm max. ht.)
CR=HC49/US SMD (3.20mm max. ht.)
Tolerance/Stability
A=±50/100
N=±5/10
B=±30/50
C=±15/30
D=±15/50
E=±25/30
F=±25/50
G=±10/30
H=±20/20
J=± 30/30
K=±20/20
L=±10/25
M=±15/15
Mode of Operation
1=Fundamental (over 25.000MHz AT and BT Cut Available)
3=Third Overtone, 5=Fifth Overtone
Operating Temperature Range
C=0°C to 70°C
E=-20°C to 70°C
F=-40°C to 85°C
Load Capacitance
S=Series, XX=XXpF (Pico Farads)
ELECTRICAL SPECIFICATIONS
Revision: 1994-F
Frequency Range
3.579545MHz to 100.000MHz
Frequency Tolerance/Stability
A, B, C, D, E, F, G, H, J, K, L, M
See above for details!
Other Combinations Available. Contact Factory for Custom Specifications.
Operating Temperature Range
“C” Option, “E” Option, “F” Option
0°C to 70°C, -20°C to 70°C, -40°C to 85°C
Aging
±5ppm / year Maximum
Storage Temperature Range
-55°C to 125°C
Load Capacitance
“S” Option
“XX” Option
Series
10pF to 50pF
Shunt Capacitance
7pF Maximum
Insulation Resistance
500 Megaohms Minimum at 100Vdc
Drive Level
2mWatts Maximum, 100uWatts Correlation
Solder Temp. (max) / Plating / Moisture Sensitivity 260°C / Sn-Ag-Cu / None
EQUIVALENT SERIES RESISTANCE (ESR)
Frequency (MHz)
ESR (ohms)
Frequency (MHz)
ESR (ohms)
Frequency (MHz)
ESR (ohms)
3.579545 to 4.999
120
9.000 to 12.999
50
26.000 to 39.999
100 (3rd OT)
5.000 to 5.999
80
13.000 to 19.000
40
40.000 to 75.000
80 (3rd OT)
6.000 to 6.999
70
20.000 to 29.000
30
7.000 to 8.999
60
30.000 to 50.000 (BT Cut)
40
MECHANICAL DIMENSIONS
Marking Guide
All Dimensions in mm.
3.51 TYP
10.0 ±0.2
11.3
12.000CYM
12.4
12.000 = Frequency
C
= Caliber Electronics Inc.
YM
= Date Code (Year/Month)
4.85 Max
TEL 949-366-8700
4.5
Max
0.80 ±0.30
(X2)
FAX 949-366-8707
WEB http://www.caliberelectronics.com
Similar pages