Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 1316615013 Item: DIL-CL-1A66-15-13M Coil Data at 20 °C Conditions Min Typ Max Unit Conditions Min Typ Max Unit Coil resistance Coil current Coil voltage Pull-In voltage Drop-Out voltage Contact data 66 Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage (<21 AT) Operate time incl. bounce Release time not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ! "# Start Value $ % & !"! & RH <45 %, 100 VDC test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation ' Conditions Contact data 66/1 Min Typ Max Unit Capacity () Special Product Data Conditions Min Housing material Remarks Sealing compound Typ Max Unit PBT glass fibre reinforced with metal shielding Polyurethan Environmental data Insulation resistance Coil/Contact Insulation voltage Coil/Contact Shock Vibration Ambient temperature Storage temperature Conditions Min RH <45%, 200 VDC Messspannung gemäß IEC 255-5 1/2 sine wave duration 11ms from 10 - 2000 Hz Typ Max $ - Unit ' * . + + , , Modifications in the sense of technical progress are reserved Designed at: Last Change at: 12.11.07 Designed by: Approval at: Last Change by: Approval at: 12.11.07 Approval by: Approval by: Version: 01 Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 1316615013 Item: DIL-CL-1A66-15-13M Environmental data Soldering temperature Cleaning Conditions Min Wellenlöten max. 5 sec Typ fully sealed Max Unit , Modifications in the sense of technical progress are reserved Designed at: Last Change at: 12.11.07 Designed by: Approval at: Last Change by: Approval at: 12.11.07 Approval by: Approval by: Version: 01