Aluminum Electrolytic Capacitors/ FR Radial Lead Type Series: FR Type: A ■ Features ■ Country of origin ● Low ESR (Same as FM Series) ● Endurance : 5000 h to 10000 h at +105 °C ● RoHS directive compliant Malaysia ■ Attention Not applicable for automotive ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan d –40 °C to +105 °C 6.3 V.DC to 63 V.DC 4.7 μF to 8200 μF ±20 % (120 Hz/+20 °C) I < 0.01 CV (μA) After 2 minutes W.V. 6.3 10 16 25 35 50 tan d 0.22 0.19 0.16 0.14 0.12 0.10 Add 0.02 per 1000 μF for products of 1000 μF or more. 63 0.09 (120 Hz/+20 °C) After following life test with DC voltage and +105 °C±2 °C ripple current value applied. (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 °C, the capacitors shall meet the limits specified below. Duration 05×11/ 06.3×11.2 : 5000 hours 08×11.5/ 010×12.5 : 6000 hours (✽ Only EEUFR1V331U (010×12.5) 5000 hours) 08×15/ 010×16 : 8000 hours, 08×20 : 9000 hours 010×20 to 010×25/ 012.5×20 to 012.5×35/ 016×20 to 016×25 : 10000 hours Endurance Capacitance change ±25 % of initial measured value (6.3 V to 10 V : ±30 %) tan d < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life ■ Frequency correction factor for ripple current W.V.(V.DC) 4.7 6.3 to 63 Frequency (Hz) Cap (μF) 47 60 120 1k 10 k 100 k to 33 0.45 0.55 0.75 0.90 1.00 to 330 0.60 0.70 0.85 0.95 1.00 390 to 1000 0.65 0.75 0.90 0.98 1.00 1200 to 8200 0.75 0.80 0.95 1.00 1.00 ■ Dimensions in mm (not to scale) fd±0.05 Sleeve Pressure relief 06.3 (Unit : mm) 08 010 + L= = Body Dia. 0D 14 min. 0D±0.5 3 min. F±0.5 – 0D±0.5 L16 : L±1.5 L20 : L±2.0 5 6.3 8 10 12.5 16 Body Length L — — — — 12.5 to 25 30 to 35 — Lead Dia. 0d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 May. 2014 – EEE-82 – Aluminum Electrolytic Capacitors/ FR ■ Case size/Impedance/Ripple current 6.3 V to 35 V W.V.(V.DC) Case size (0D×L) Impedance (Ω/100 kHz) 50 V Ripple Current (mA r.m.s./100 kHz) +105 °C Impedance (Ω/100 kHz) Ripple Current (mA r.m.s./100 kHz) +20 °C –10 °C +20 °C –10 °C 5 × 11 0.300 1.000 280 0.340 1.130 +105 °C 250 6.3 × 11.2 0.130 0.430 455 0.140 0.460 405 8 × 11.5 0.056 0.168 950 0.061 0.183 870 8 × 15 0.041 0.123 1240 0.045 0.135 1140 8 × 20 0.030 0.090 1560 0.033 0.099 1430 10 × 12.5 0.043 0.114 1290 0.042 0.126 1170 10 × 16 0.028 0.078 1790 0.030 0.090 1650 10 × 20 0.020 0.057 2180 0.023 0.069 1890 10 × 25 0.018 0.054 2470 0.022 0.066 2150 12.5 × 20 0.018 0.045 2600 0.022 0.055 2260 12.5 × 25 0.015 0.038 3190 0.018 0.045 2660 12.5 × 30 0.013 0.033 3630 0.016 0.040 3160 12.5 × 35 0.012 0.030 3750 0.014 0.035 3270 16 × 20 0.017 0.043 3300 0.019 0.048 2870 16 × 25 0.014 0.035 3820 0.016 0.040 3320 63 V W.V.(V.DC) Case size (0D×L) Impedance (Ω/100 kHz) +20 °C –10 °C 0.510 2.040 Ripple Current (mA r.m.s./100 kHz) +105 °C 5 × 11 6.3 × 11.2 0.210 0.840 284 8 × 11.5 0.092 0.368 566 8 × 15 0.068 0.272 741 8 × 20 0.050 0.200 930 10 × 12.5 0.063 0.252 761 10 × 16 0.045 0.180 1073 10 × 20 0.035 0.140 1229 10 × 25 0.033 0.132 1500 12.5 × 20 0.033 0.125 1582 12.5 × 25 0.027 0.092 1995 12.5 × 30 0.024 0.082 2528 12.5 × 35 0.021 0.071 2780 16 × 20 0.029 0.093 2153 16 × 25 0.024 0.074 2988 175 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 May. 2014 – EEE-83 – Aluminum Electrolytic Capacitors/ FR ■ Standard Products Case size W.V. Cap. (±20 %) (V) (μF) 150 220 330 470 820 1000 1200 6.3 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 100 150 220 270 470 680 820 1000 10 1500 1800 2200 3300 3900 4700 5600 6800 Specification Lead Length Ripple Imped- Endur- Lead Lead Space Current ance ance Dia. Dia. Length Taping Taping (100 kHz) (100 kHz) Straight ✽B ✽H (+105 °C) (+20 °C) (mm) (mm) (mA r.m.s.) (Ω) (hours) (mm) (mm) (mm) (mm) 5 6.3 6.3 6.3 8 8 8 10 8 10 10 10 10 12.5 12.5 12.5 12.5 16 16 5 5 6.3 6.3 8 8 10 10 8 8 10 10 10 12.5 12.5 12.5 16 12.5 12.5 16 11 11.2 11.2 11.2 11.5 11.5 15 12.5 20 16 20 25 25 20 25 30 35 20 25 11 11 11.2 11.2 11.5 11.5 12.5 16 15 20 16 20 25 20 25 30 20 35 35 25 280 455 455 455 950 950 1240 1290 1560 1790 2180 2470 2470 2600 3190 3630 3750 3300 3820 280 280 455 455 950 950 1290 1790 1240 1560 1790 2180 2470 2600 3190 3630 3300 3750 3750 3820 0.300 0.130 0.130 0.130 0.056 0.056 0.041 0.043 0.030 0.028 0.020 0.018 0.018 0.018 0.015 0.013 0.012 0.017 0.014 0.300 0.300 0.130 0.130 0.056 0.056 0.043 0.028 0.041 0.030 0.028 0.020 0.018 0.018 0.015 0.013 0.017 0.012 0.012 0.014 5000 5000 5000 5000 6000 6000 8000 6000 9000 8000 10000 10000 10000 10000 10000 10000 10000 10000 10000 5000 5000 5000 5000 6000 6000 6000 8000 8000 9000 8000 10000 10000 10000 10000 10000 10000 10000 10000 10000 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 2.0 2.5 2.5 2.5 3.5 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 2.0 2.0 2.5 2.5 3.5 3.5 5.0 5.0 3.5 3.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 Min. Packaging Q'ty Part No. Straight Taping Leads (pcs) (pcs) EEUFR0J151( ) EEUFR0J221( ) EEUFR0J331( ) EEUFR0J471( ) EEUFR0J821( ) EEUFR0J102( ) EEUFR0J122L( ) EEUFR0J122( ) EEUFR0J152L( ) EEUFR0J182( ) EEUFR0J222( ) EEUFR0J272L( ) EEUFR0J332L( ) EEUFR0J392( ) EEUFR0J472( ) EEUFR0J562L EEUFR0J682L EEUFR0J682S( ) EEUFR0J822( ) EEUFR1A101( ) EEUFR1A151( ) EEUFR1A221( ) EEUFR1A271( ) EEUFR1A471( ) EEUFR1A681( ) EEUFR1A821( ) EEUFR1A102( ) EEUFR1A102L( ) EEUFR1A152L( ) EEUFR1A152( ) EEUFR1A182( ) EEUFR1A222L( ) EEUFR1A332( ) EEUFR1A392( ) EEUFR1A472L EEUFR1A472S( ) EEUFR1A562L EEUFR1A682L EEUFR1A682( ) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 2000 2000 2000 2000 1000 1000 1000 500 1000 500 500 500 500 500 500 250 250 2000 2000 2000 2000 1000 1000 500 500 1000 1000 500 500 500 500 500 250 250 · When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 May. 2014 – EEE-84 – Aluminum Electrolytic Capacitors/ FR ■ Standard Products Case size W.V. Cap. (±20 %) (V) (μF) 68 100 120 220 470 680 1000 16 1500 1800 2200 2700 3300 3900 4700 5600 47 68 100 150 220 330 390 470 560 25 680 820 1000 1200 1500 1800 2200 2700 3300 Specification Lead Length Ripple Imped- Endur- Lead Lead Space Current ance ance Dia. Dia. Length Taping Taping (100 kHz) (100 kHz) Straight ✽B ✽H (+105 °C) (+20 °C) (mm) (mm) (mA r.m.s.) (Ω) (hours) (mm) (mm) (mm) (mm) 5 5 6.3 6.3 8 8 10 8 10 10 10 10 12.5 12.5 12.5 16 12.5 16 12.5 16 16 5 5 6.3 6.3 8 8 8 8 8 10 8 8 10 10 10 10 10 12.5 12.5 16 12.5 16 12.5 16 16 11 11 11.2 11.2 11.5 15 12.5 20 16 20 25 25 20 25 30 20 35 20 35 25 25 11 11 11.2 11.2 11.5 11.5 15 15 20 12.5 20 20 16 20 20 25 25 20 25 20 30 20 35 20 25 280 280 455 455 950 1240 1290 1560 1790 2180 2470 2470 2600 3190 3630 3300 3750 3300 3750 3820 3820 280 280 455 455 950 950 1240 1240 1560 1290 1560 1560 1790 2180 2180 2470 2470 2600 3190 3300 3630 3300 3750 3300 3820 0.300 0.300 0.130 0.130 0.056 0.041 0.043 0.030 0.028 0.020 0.018 0.018 0.018 0.015 0.013 0.017 0.012 0.017 0.012 0.014 0.014 0.300 0.300 0.130 0.130 0.056 0.056 0.041 0.041 0.030 0.043 0.030 0.030 0.028 0.020 0.020 0.018 0.018 0.018 0.015 0.017 0.013 0.017 0.012 0.017 0.014 5000 5000 5000 5000 6000 8000 6000 9000 8000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 5000 5000 5000 5000 6000 6000 8000 8000 9000 6000 9000 9000 8000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 2.0 2.0 2.5 2.5 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 7.5 2.0 2.0 2.5 2.5 3.5 3.5 3.5 3.5 3.5 5.0 3.5 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.5 2.5 2.5 2.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 2.5 2.5 2.5 2.5 Min. Packaging Q'ty Part No. Straight Taping Leads (pcs) (pcs) EEUFR1C680( ) EEUFR1C101( ) EEUFR1C121( ) EEUFR1C221( ) EEUFR1C471( ) EEUFR1C681L( ) EEUFR1C681( ) EEUFR1C102L( ) EEUFR1C102( ) EEUFR1C152( ) EEUFR1C152L( ) EEUFR1C182L( ) EEUFR1C222( ) EEUFR1C272( ) EEUFR1C332L EEUFR1C332S( ) EEUFR1C392L EEUFR1C392S( ) EEUFR1C472L EEUFR1C472( ) EEUFR1C562( ) EEUFR1E470( ) EEUFR1E680( ) EEUFR1E101( ) EEUFR1E151( ) EEUFR1E221( ) EEUFR1E331( ) EEUFR1E391L( ) EEUFR1E471Y( ) EEUFR1E471L( ) EEUFR1E471( ) EEUFR1E561L( ) EEUFR1E681L( ) EEUFR1E681( ) EEUFR1E821( ) EEUFR1E102( ) EEUFR1E102L( ) EEUFR1E122L( ) EEUFR1E152( ) EEUFR1E182( ) EEUFR1E182S( ) EEUFR1E222L EEUFR1E222S( ) EEUFR1E272L EEUFR1E272S( ) EEUFR1E332( ) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 2000 2000 2000 2000 1000 1000 500 1000 500 500 500 500 500 500 250 250 250 250 2000 2000 2000 2000 1000 1000 1000 1000 1000 500 1000 1000 500 500 500 500 500 500 500 250 250 250 250 · When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 May. 2014 – EEE-85 – Aluminum Electrolytic Capacitors/ FR ■ Standard Products Case size W.V. (V) 35 50 63 Specification Lead Length Ripple ImpedEndurLead Lead Space Cap. Dia. (±20 %) Dia. Length Current ance ance Taping Taping (100 kHz) (100 kHz) Straight ✽B ✽H (+105 °C) (+20 °C) (μF) (mm) (mm) (mA r.m.s.) (Ω) (hours) (mm) (mm) (mm) (mm) 33 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 68 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 100 8 11.5 950 0.056 6000 0.6 3.5 5.0 180 8 11.5 950 0.056 6000 0.6 3.5 5.0 220 8 11.5 950 0.056 6000 0.6 3.5 5.0 8 15 1240 0.041 8000 0.6 3.5 5.0 270 10 12.5 1290 0.043 6000 0.6 5.0 5.0 330 10 12.5 1330 0.043 5000 0.6 5.0 5.0 390 8 20 1560 0.030 9000 0.6 3.5 5.0 8 20 1560 0.030 9000 0.6 3.5 5.0 470 10 16 1790 0.028 8000 0.6 5.0 5.0 560 10 20 2180 0.020 10000 0.6 5.0 5.0 10 20 2180 0.020 10000 0.6 5.0 5.0 680 10 25 2470 0.018 10000 0.6 5.0 5.0 820 10 25 2470 0.018 10000 0.6 5.0 5.0 1000 12.5 20 2600 0.018 10000 0.6 5.0 5.0 1200 12.5 25 3190 0.015 10000 0.6 5.0 5.0 12.5 30 3630 0.013 10000 0.8 5.0 1500 16 20 3300 0.017 10000 0.8 7.5 7.5 12.5 35 3750 0.012 10000 0.8 5.0 1800 16 25 3820 0.014 10000 0.8 7.5 7.5 12.5 35 3750 0.012 10000 0.8 5.0 2200 16 25 3820 0.014 10000 0.8 7.5 7.5 4.7 5 11 185 0.620 5000 0.5 2.0 5.0 2.5 10 5 11 250 0.340 5000 0.5 2.0 5.0 2.5 22 5 11 250 0.340 5000 0.5 2.0 5.0 2.5 47 6.3 11.2 405 0.140 5000 0.5 2.5 5.0 56 6.3 11.2 405 0.140 5000 0.5 2.5 5.0 2.5 100 8 11.5 870 0.061 6000 0.6 3.5 5.0 120 8 15 1140 0.045 8000 0.6 3.5 5.0 150 10 12.5 1170 0.042 6000 0.6 5.0 5.0 180 8 20 1430 0.033 9000 0.6 3.5 5.0 220 10 16 1650 0.030 8000 0.6 5.0 5.0 270 10 20 1890 0.023 10000 0.6 5.0 5.0 330 10 25 2150 0.022 10000 0.6 5.0 5.0 470 12.5 20 2260 0.022 10000 0.6 5.0 5.0 560 12.5 25 2660 0.018 10000 0.6 5.0 5.0 680 12.5 30 3160 0.016 10000 0.8 5.0 12.5 35 3270 0.014 10000 0.8 5.0 820 16 20 2870 0.019 10000 0.8 7.5 7.5 1000 16 25 3320 0.016 10000 0.8 7.5 7.5 18 5 11 175 0.510 5000 0.5 2.0 5.0 2.5 47 6.3 11.2 284 0.210 5000 0.5 2.5 5.0 2.5 82 8 11.5 566 0.092 6000 0.6 3.5 5.0 8 15 741 0.068 8000 0.6 3.5 5.0 100 10 12.5 761 0.063 6000 0.6 5.0 5.0 8 20 930 0.050 9000 0.6 3.5 5.0 120 10 16 1073 0.045 8000 0.6 5.0 5.0 8 20 930 0.050 9000 0.6 3.5 5.0 150 10 16 1073 0.045 8000 0.6 5.0 5.0 180 10 20 1229 0.035 10000 0.6 5.0 5.0 220 10 25 1500 0.033 10000 0.6 5.0 5.0 10 20 1229 0.035 10000 0.6 5.0 5.0 270 10 25 1500 0.033 10000 0.6 5.0 5.0 12.5 20 1582 0.033 10000 0.6 5.0 5.0 330 12.5 20 1582 0.033 10000 0.6 5.0 5.0 390 12.5 25 1995 0.027 10000 0.6 5.0 5.0 470 12.5 25 1995 0.027 10000 0.6 5.0 5.0 12.5 30 2528 0.024 10000 0.8 5.0 560 16 20 2153 0.029 10000 0.8 7.5 7.5 680 12.5 35 2780 0.021 10000 0.8 5.0 820 16 25 2988 0.024 10000 0.8 7.5 7.5 Min. Packaging Q'ty Part No. EEUFR1V330( ) EEUFR1V680( ) EEUFR1V101( ) EEUFR1V181( ) EEUFR1V221( ) EEUFR1V271L( ) EEUFR1V271( ) EEUFR1V331U( ) EEUFR1V391L( ) EEUFR1V471L( ) EEUFR1V471( ) EEUFR1V561( ) EEUFR1V681( ) EEUFR1V681L( ) EEUFR1V821L( ) EEUFR1V102( ) EEUFR1V122( ) EEUFR1V152L EEUFR1V152S( ) EEUFR1V182L EEUFR1V182( ) EEUFR1V222L EEUFR1V222( ) EEUFR1H4R7( ) EEUFR1H100( ) EEUFR1H220( ) EEUFR1H470( ) EEUFR1H560( ) EEUFR1H101( ) EEUFR1H121L( ) EEUFR1H151( ) EEUFR1H181L( ) EEUFR1H221( ) EEUFR1H271( ) EEUFR1H331L( ) EEUFR1H471( ) EEUFR1H561( ) EEUFR1H681L EEUFR1H821L EEUFR1H821S( ) EEUFR1H102( ) EEUFR1J180( ) EEUFR1J470( ) EEUFR1J820( ) EEUFR1J101L( ) EEUFR1J101( ) EEUFR1J121L( ) EEUFR1J121( ) EEUFR1J151L( ) EEUFR1J151( ) EEUFR1J181( ) EEUFR1J221L( ) EEUFR1J271U( ) EEUFR1J271L( ) EEUFR1J271( ) EEUFR1J331( ) EEUFR1J391( ) EEUFR1J471( ) EEUFR1J561L EEUFR1J561S( ) EEUFR1J681L EEUFR1J821( ) Straight Taping Leads (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 (pcs) 2000 2000 1000 1000 1000 1000 500 500 1000 1000 500 500 500 500 500 500 500 250 250 250 2000 2000 2000 2000 2000 1000 1000 500 1000 500 500 500 500 500 250 250 2000 2000 1000 1000 500 1000 500 1000 500 500 500 500 500 500 500 500 500 250 250 · When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 May. 2014 – EEE-86 –