Socay ESD19V12D-A Transient voltage suppressors for esd protection Datasheet

Transient Voltage Suppressors for ESD Protection
SOD123 Series TVS/ESD
Uni-directional
Description
Bi-directional
The SOD123 Series TVS/ESD is designed specifically to protect sensitive
electronic equipment from voltage transients induced by ESD,lightning
surge and other transient voltage events.
Features
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
Compatible with industrial standard package SOD-123
For surface mounted applications in order to optimize board space
Low leakage
Uni and Bidirectional unit
Glass passivated junction
Low inductance
Excellent clamping capability
200W Peak power capability at 10 × 1000µs waveform Repetition rate
(duty cycle):0.01%
Fast response time: typically less than 1.0ps from 0 Volts to VBR min
High Temperature soldering: 260°C/40 seconds at terminals
Typical maximum temperature coefficient ΔVBR = 0.1% ×
[email protected]°C× ΔT
Plastic package has Underwriters Laboratory Flammability 94V-0
Matte tin lead–free Plated
Halogen free and RoHS compliant
Typical failure mode is short from over-specified voltage or current
Whisker test is conducted based on JEDEC JESD201A per its table
4a and 4c
IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact)
ESD protection of data lines in accordance with IEC 61000-4-2
(IEC801-2)
EFT protection of data lines in accordance with IEC 61000-4-4
(IEC801-4)
Maximum Ratings
Functional Diagram
Bi-directional
Cathode
Anode
Uni-direction
Applications
TVS/ESD devices are ideal for the protection of low speed I/O
interfaces, VCC bus and other vulnerable circuits used in
Telecom, Computer, Industrial and Consumer electronic
applications.
(TA=25℃ unless otherwise noted)
Parameter
Symbol
Value
Unit
PPPM
200
Watts
PPPM
1000
Watts
IPP
See Next Table
Amps
PM(AV)
0.4
Watt
Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3)
IFSM
20
Amps
Maximum Instantaneous Forward Voltage at 25A for Unidirectional Only
(Note 4)
VF
3.5
Voltage
TJ , TSTG
-55 to +150
°C
Peak Pulse Power Dissipation with a 10/1000µs waveform (Note 1),
(Note 2)
Peak Pulse Power Dissipation with a 8/20µs waveform
Peak Pulse Current with a 10/1000µs waveform.(Note1,Fig.3)
Power Dissipation on Infinite Heat Sink at TL=75°C
Operating junction and Storage Temperature Range.
Notes:
1. Non-repetitive current pulse, per Fig. 3 and derated above T A = 25°C per Fig. 2.
2. Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal.
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minutes maximum.
4. VF < 3.5V for VBR < 200V and VF< 6.5V for VBR > 201V.
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
www.socay.com
1/6
@ SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.
Transient Voltage Suppressors for ESD Protection
SOD123 Series TVS/ESD
Electrical Characteristics
(TA=25°C unless otherwise noted)
Device
Marking
Part Number
Uni
Bi
Uni
Bi
ESD3.3V12D-A
ESD5.0V12D-A
ESD6.0V12D-A
ESD6.5V12D-A
ESD7.0V12D-A
ESD7.5V12D-A
ESD8.0V12D-A
ESD8.5V12D-A
ESD9.0V12D-A
ESD10V12D-A
ESD11V12D-A
ESD12V12D-A
ESD13V12D-A
ESD14V12D-A
ESD15V12D-A
ESD16V12D-A
ESD17V12D-A
ESD18V12D-A
ESD19V12D-A
ESD20V12D-A
ESD22V12D-A
ESD24V12D-A
ESD26V12D-A
ESD28V12D-A
ESD30V12D-A
ESD33V12D-A
ESD36V12D-A
ESD40V12D-A
ESD43V12D-A
ESD45V12D-A
ESD48V12D-A
ESD51V12D-A
ESD54V12D-A
ESD58V12D-A
ESD60V12D-A
ESD64V12D-A
ESD70V12D-A
ESD75V12D-A
ESD78V12D-A
ESD80V12D-A
ESD85V12D-A
ESD90V12D-A
ESD96V12D-A
ESD110V12D-A
ESD120V12D-A
ESD130V12D-A
ESD140V12D-A
ESD150V12D-A
ESD160V12D-A
ESD170V12D-A
ESD180V12D-A
ESD190V12D-A
ESD3.3V12D-C
ESD5.0V12D-C
ESD6.0V12D-C
ESD6.5V12D-C
ESD7.0V12D-C
ESD7.5V12D-C
ESD8.0V12D-C
ESD8.5V12D-C
ESD9.0V12D-C
ESD10V12D-C
ESD11V12D-C
ESD12V12D-C
ESD13V12D-C
ESD14V12D-C
ESD15V12D-C
ESD16V12D-C
ESD17V12D-C
ESD18V12D-C
ESD19V12D-C
ESD20V12D-C
ESD22V12D-C
ESD24V12D-C
ESD26V12D-C
ESD28V12D-C
ESD30V12D-C
ESD33V12D-C
ESD36V12D-C
ESD40V12D-C
ESD43V12D-C
ESD45V12D-C
ESD48V12D-C
ESD51V12D-C
ESD54V12D-C
ESD58V12D-C
ESD60V12D-C
ESD64V12D-C
ESD70V12D-C
ESD75V12D-C
ESD78V12D-C
ESD80V12D-C
ESD85V12D-C
ESD90V12D-C
ESD96V12D-C
ESD110V12D-C
ESD120V12D-C
ESD130V12D-C
ESD140V12D-C
ESD150V12D-C
ESD160V12D-C
ESD170V12D-C
ESD180V12D-C
ESD190V12D-C
FD
FE
FG
FK
FM
FP
FR
FT
FV
FX
FZ
HE
HG
HK
HM
HP
HR
HT
HB
HV
HX
HZ
JE
JG
JK
JM
JP
JR
JT
JV
JX
JZ
XE
XG
XK
XM
XP
XR
XT
XB
XV
XX
XZ
TE
TG
TK
TB
TM
TP
TR
TT
TV
KE
KG
KK
KM
KP
KR
KT
KV
KX
KZ
LE
LG
LK
LM
LP
LR
LT
LB
LV
LX
LZ
ME
MG
MK
MM
MP
MR
MT
MV
MX
MZ
NE
NG
NK
NM
NP
NR
NT
NB
NV
NX
NZ
PE
PG
PK
PB
PM
PP
PR
PT
PV
VRWM
(V)
(Max.)
3.3
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
19.0
20.0
22.0
24.0
26.0
28.0
30.0
33.0
36.0
40.0
43.0
45.0
48.0
51.0
54.0
58.0
60.0
64.0
70.0
75.0
78.0
80.0
85.0
90.0
96.0
110.0
120.0
130.0
140.0
150.0
160.0
170.0
180.0
190.0
Breakdown
Voltage VBR (V)
@IT
Min
Max
5.20
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.00
11.10
12.20
13.30
14.40
15.60
16.70
17.80
18.90
20.00
21.10
22.20
24.40
26.70
28.90
31.10
33.30
36.70
40.00
44.40
47.80
50.00
53.30
56.70
60.00
64.40
66.70
71.10
77.80
83.30
86.70
88.80
94.40
100.00
111.00
122.00
133.00
144.00
155.00
167.00
178.00
189.00
200.00
211.00
6.00
7.00
7.37
7.98
8.60
9.21
9.83
10.40
11.10
12.30
13.50
14.70
15.90
17.20
18.50
19.70
20.90
22.10
23.30
24.50
26.90
29.50
31.90
34.40
36.80
40.60
44.20
49.10
52.80
55.30
58.90
62.70
66.30
71.20
73.70
78.60
86.00
92.10
95.80
97.60
104.00
111.00
123.00
135.00
147.00
159.00
171.00
185.00
197.00
209.00
220.00
232.00
IT
VC
(mA)
10
10
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
IR
Max
@IPP
8.0
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
30.6
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103.0
113.0
121.0
126.0
129.0
137.0
146.0
162.0
177.0
193.0
209.0
224.0
243.0
259.0
275.0
292.0
308.0
25.0
21.74
19.42
17.86
16.67
15.50
14.71
13.89
12.99
11.76
10.99
10.05
9.30
8.62
8.20
7.69
7.25
6.85
6.54
6.17
5.63
5.14
4.75
4.41
4.13
3.75
3.44
3.10
2.88
2.75
2.58
2.43
2.30
2.14
2.07
1.94
1.77
1.65
1.59
1.55
1.46
1.37
1.23
1.13
1.04
0.96
0.89
0.82
0.77
0.73
0.69
0.69
400
400
400
250
100
50
25
10
5
2.5
2.5
2.5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Note:
1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device
2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices
3. For Bi-Directional devices having VR of 10 volts and under, the I R limit is double
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
www.socay.com
2/6
@ SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.
Transient Voltage Suppressors for ESD Protection
SOD123 Series TVS/ESD
Ratings and Characteristic Curves (TA=25°C unless otherwise noted)
Fig1 – 10/1000 μs Pulse Waveform
Fig2 - ESD Pulse Waveform (according to IEC 61000-4-2)
Peak Value
IPPM
TJ=25°C
Pulse Width(td) is defined
as the point where the peak
current decays to 50% of IPPM
Pulse
tr=10µsec
Peak
100
Half Value
IPPM (IPPM/2)
50
10/1000µsec. Waveform
as defined by R.E.A
10%
1.0
2.0
t - Time (ms)
3.0
Time
(ns)
tr = 0.7~1ns
30ns
60ns
tc
0
0
4.0
Fig3 - Pulse Derating Curve
Fig4 - Typical Junction Capacitance
100000
100
CJ – Junction Capacitance (pF)
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage %
100%
90%
Percent of
Current %
IPPM - Peak Pulse Current, % IRSM
150
80
60
40
20
Bi-directional
@zero bins
10000
Uni-directional
@zero bins
1000
Uni-directional @VRWM
100
10
Tj=25°C
f=1.0MHz
Vsig=50mVp-p
Bi-directional @VRWM
1
0
0
25
50
75
100
125
TA-Ambient temperature(°C)
150
1.0
175
Fig5 - ESD Clamping (+8KV Contac per IEC61000-4-2)
1000.0
Fig6 - ESD Clamping (-8KV Contac per IEC61000-4-2)
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
10.0
100.0
VBR-Reverse Breakdown Voltage (V)
www.socay.com
3/6
@ SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.
Transient Voltage Suppressors for ESD Protection
SOD123 Series TVS/ESD
Fig7 I-V Curve Characteristics
Uni-directional
Bi-directional
I
I
IPP
IF
VC
VC
V
VBR VRW
R
VF
IT
IT
VBR VRW
R
IT
SOD-123 Molded Plastic over glass
passivated junction
Color band denotes cathode except
Bipolar
Matte Tin-plated leads, Solderable per
JESD22-B102D
Terminal
VRW VBR VC
R
Environmental Specifications
Physical Specifications
Polarity
IR
IPP
IPP
Case
V
IR
Temperature Cycle
JESD22-A104
Pressure Cooker
JESD22-A102
High Temp. Storage
JESD22-A103
HTRB
JESD22-A108
Thermal Shock
JESD22-A106
Soldering Parameters
Reflow Condition
Lead–free assembly
TP
Ramp-up
Critical Zone
TL to TP
Temperature
TL
TS(max)
Pre Heat
-Temperature Min (Ts(min))
150°C
-Temperature Max (Ts(max))
200°C
- Time (min to max) (Ts)
60 -180 Seconds
Ramp-down
TS(min)
Preheat
25
Time to peak temperature
(t 25℃ to peak)
Average ramp up rate ( Liquidus Temp TL)
to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (TL)
60 -150 Seconds
Reflow
Time
Peak Temperature (TP)
Time within 5°C
Temperature (tp)
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
260 +0/-5°C
of
actual
peak
20 -40 Seconds
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max
Do not exceed
280°C
www.socay.com
4/6
@ SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.
Transient Voltage Suppressors for ESD Protection
SOD123 Series TVS/ESD
Dimensions
Inches
SOD-123
Millimeters
Dimensions
Min
Max
Min
Max
A
0.031
0.044
0.77
1.09
B
0.1
0.112
2.51
2.81
C
0.055
0.071
1.38
1.78
D
0.140
0.152
3.51
3.82
E
0.037
0.053
0.93
1.33
F
0.01
-
0.25
-
G
-
0.008
-
0.20
Cathode Band
Part Numbering
Part Marking
ESD12D×× V-A
Uni-directional
VRwm
Marking Code
Cathode Band
SOD-123
ESD SERIES
Packaging
Part Number
Component
Package
Quantity
Packaging Option
Packaging
Specification
ESD12DXXV-A/C
SOD-123
3000
Tape & Reel -12mm/7″tape
EIA STD RS-481
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
www.socay.com
5/6
@ SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.
Transient Voltage Suppressors for ESD Protection
SOD123 Series TVS/ESD
Tape and Reel Specifications
7.0
(177.8)
0.157
(4.0)
0.059 Diameter
(1.5)
0.472
(12.0)
0.36
(9.2)
0.512(13.0)
Arbor Hole Diameter
0.157
(4.0)
Cover tape
0.49
(12.4)
Direction of Feed
Dimensions are in inches
(and millimeters)
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
www.socay.com
6/6
@ SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.
Similar pages