Conductive Polymer Aluminum Electrolytic Capacitors Surface Mount Type Series : GX (Super Low ESR Products) Features ● Large capacitance (560 μF max.) Low ESR (3 mΩ max.) ● Low ESL ( 3-terminals : 50 % less than 2-terminals) [Suffix : L] ● High ripple current (10200 mAr.m.s. max.) ● RoHS compliance, Halogen free ● Super Specifications Series Category temp. range Rated voltage range Nominal cap.range Capacitance tolerance DC leakage current Dissipation factor (tan d) Surge voltage (V.DC) Endurance Damp heat (Steady state) GX –55 °C to +105 °C 2 V.DC to 2.5 V.DC 330 μF to 560 μF ±20 % (120 Hz/+20 °C) I < 0.1 CV (μA) 2 minutes < 0.06 (120 Hz/+20 °C) Rated voltage × 1.25 (15 °C to 35 °C) +105 °C, 2000 h, rated voltage applied Capacitance change Within ±20 % of the initial value tan d < 2 times of the initial limit DC leakage current < 3 times of the initial limit +60 °C, 90 %, 500 h, No-applied voltage Capacitance change of 2 V.DC to 2.5 V.DC initial measurd value +70 %, –20 % tan d < 2 times of the initial limit DC leakage current Within the initial limit Marking Cap. Polarity bar (Positive) Lot No. Rated voltage mark d 2 V.DC e 2.5 V.DC R.V. code Dimensions (not to scale) 2 terminals 3 terminals + + – H H – P P L L W1 P4 W2 W2 + W2 – W2 W1 P1 P3 P2 P1 Unit : mm Series GX L±0.2 7.3 W1±0.2 W2±0.1 H±0.1 4.3 2.4 1.9 ✽ Externals of figure are the reference. P±0.3 1.3 Unit : mm Series L±0.2 W1±0.2 W2±0.1 H±0.1 P1±0.3 P2±0.1 P3±0.2 P4±0.2 GX 7.3 4.3 2.4 1.9 1.3 1.1 0.7 1.4 ✽ Externals of figure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Nov. 2015 Conductive Polymer Aluminum Electrolytic Capacitors Characteristics list Case size (mm) Series Rated Capacitance (±20 %) voltage (V.DC) (μF) 330 2 GX 470 560 2.5 470 Specification ✽1 L 7.3 7.3 7.3 7.3 7.3 7.3 7.3 W 4.3 4.3 4.3 4.3 4.3 4.3 4.3 H 1.9 1.9 1.9 1.9 1.9 1.9 1.9 ✽2 Ripple ESR current (mAr.m.s.) (mΩ max.) 10200 3 10200 3 10200 3 10200 3 10200 3 10200 3 10200 3 The number of terminals 2 Reflow ✽3 <Standard> Part number Min.✽4 Packaging Q’ty (pcs) EEFGX0D331R EEFGX0D471R EEFGX0D471L EEFGX0D561R EEFGX0D561L EEFGX0E471R EEFGX0E471L 3500 3500 3500 3500 3500 3500 3500 3 ○ ○ ○ ○ ○ ○ ○ ✽1: Ripple current (100 kHz/ +45°C ), ✽2: ESR (100 kHz/+20 °C) ✽3: Please refer to the page of “Mounting Specifications”. ✽4: Please contact us when 500 pcs packing is necessary. Temperature compensation multipliers for ripple current Temp. T < 45 °C 45 °C < T < 85 °C 85 °C < T < 105 °C Coefficient 1.0 0.7 0.25 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Nov. 2015