BFT36A MECHANICAL DATA Dimensions in mm(inches) PNP SILICON TRANSISTOR 8.51 (0.34) 9.40 (0.37) 7.75 (0.305) 8.51 (0.335) FEATURES • FAST SWITCHING 6.10 (0.240) 6.60 (0.260) • HIGH PULSE POWER 12.70 (0.500) min. 0.89 max. (0.035) 0.41 (0.016) 0.53 (0.021) dia. APPLICATIONS 5.08 (0.200) typ. 2.54 (0.100) 2 1 • POWER SWITCHING CIRCUITS • MOTOR CONTROL 3 0.74 (0.029) 1.14 (0.045) 0.71 (0.028) 0.86 (0.034) 45° TO39 (TO205AD) Pin 1 = Emitter Pin 2 = Base Pin 3 = Collector ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO Collector – Base Voltage - 100V VCEO Collector – Emitter Voltage - 80V VEBO Emitter – Base Voltage - 5V IC IB Collector Current - 3A Base Current - 2A Ptot Total Power Dissipation at Tcase ≤ 25°C 1W Tamb Ambient Operating Temperature -55°C to +200°C Tstg, Storage Temperature -55°C to +200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 3082 Issue 1 BFT36A ELECTRICAL CHARACTERISTICS (Tamb = 25°C unless otherwise stated) Parameter h21E fT ICBO IEBO h21e VCE(sat)* VBE(sat)* C22b Test Conditions Min. Static Value of Common VCE = - 10V IC = - 0.15 50 Emitter Forward Current VCE = - 10V IC = - 2A 15 Transfer Ratio VCE = - 10V IC = - 1mA 20 VCE = - 5V IC = - 100mA Transistion Frequency Collector Base f = 20MHz VCB = - 80V Cut- Off Current. 250 — MHz IE = 0 - 100 nA t = 150°C - 100 µA - 100 nA VEB = - 4V Forward Current Transfer Ratio VCE = - 5V Max. Unit 50 Emitter–Base Cut-off Current Small Signal Common Emitter Typ. IC = - 10mA 25 — Collector – Emitter f = 1KHz Saturation Voltage* IC = - 150mA IB = - 15mA - 0.6 Base – Emitter IC = - 1A IB = - 0.1A - 0.95 Saturation Voltage* IC = - 150mA IB = - 15mA - 1.3 Common – Base VCB = - 10V IE = 0 Output Capacitance f = 1MHz - 0.3 80 V V pF *Pulse Conditions: Pulse Length = 300µs duty cycle = 1.5% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 3082 Issue 1